bitcrust vs Retromulator

bitcrust is a polyphonic synthesizer built around a SID-style voice architecture: three oscillators per voice, up to twelve voices, with ring mod, hard sync, and the pulse-width behaviour that defined a generation of 8-bit sound. The DSP is an in-house, clean-room implementation written from the public MOS 6581 register map and general DSP literature. It's not an emulator port, so bitcrust sounds SID-adjacent without inheriting the license constraints that keep most SID-inspired tools off the major app stores. Sonically it sits between a chip synth and a modern subtractive. The voice core still does gritty arp basses, zap leads and 8-bit percussion, but the architecture around it (three LFOs, a per-voice mod envelope, an 8-slot modulation matrix, and a 6-slot post-SID FX rack with drive, bitcrusher, tempo-synced delay, chorus, reverb, compressor and limiter) pushes it into pad, keys and texture territory. WHAT THIS PURCHASE INCLUDES Universal Purchase: one price buys the Mac app plus the iPad version (Standalone and AUv3). On the Mac, the App Store build is the Standalone app only. No AU, no VST3: the Mac App Store doesn't distribute plugin formats. AU and VST3 versions are available separately; details at anode-labs.com/bitcrust. The iPad build is a co-equal target, not a downscale. The full 179-preset factory library, all 14 themes, and the complete mod matrix and FX rack ship on both platforms. • Voice core: 12-voice polyphony, 3 oscillators per voice, SID-style triangle / saw / pulse / noise with hard sync and ring mod, per-VCO ADSR • Filter: global VCF (LP / BP / HP) with live curve, selectable 6581 / 8580 chip model, Vintage vs. Modern oscillator mode • Modulation: 3 global LFOs (7 shapes, host-sync or Hz), per-voice mod envelope, 8-slot matrix, MIDI sources (velocity, poly AT, channel AT, mod wheel, pitch bend) • FX rack: 6 slots, drag-to-reorder, per-slot bypass / mix; Drive (5 modes), Bitcrusher, Delay (tempo-sync), Chorus, Reverb, Compressor, Limiter. Every FX parameter is a modulation destination. • MIDI: 16-step sequencer, arpeggiator (Up / Down / UpDown / Random, 6 rate divisions, octave range), MIDI Learn on every knob, note Hold • Presets: 179 factory patches across 10 groups, full-metadata save (author, description, tags), Preset Preview audition without committing, A/B snapshot compare, XML import / export • UI: 6-tab navigation, 14 themes with optional phosphor / CRT overlays, monitor strip (oscilloscope, vectorscope, FFT spectrum, 3D spectrogram, stereo field), QWERTY note typing from any tab Mac: Standalone app, universal binary (Apple Silicon + Intel), macOS 12 (Monterey) or later. iPad: AUv3 extension plus a Standalone for headphone jamming. In-DAW use on iPad needs an AUv3 host (GarageBand, Logic Pro for iPad, AUM, Cubasis and so on). Support: https://anode-labs.com/bitcrust · support@anode-labs.com Privacy policy: https://anode-labs.com/privacy

Retromulator is a multi-core retro hardware emulation app and AUv3 plug-in that brings legendary synthesizer, sampler, and keyboard cores back to life through authentic low-level emulation. Each core runs its original firmware, a clean-room controller written from the behaviour of the hardware, a physical model or sample data — delivering the unmistakable character of the hardware that defined electronic music from the early 80s through the 2000s. — EMULATED CORES — VIRTUAL ANALOG SYNTHS • Nordic — virtual analog synth after the Nord Lead 1 by discoDSP, with its own panel, factory banks, Nord Lead SysEx import and its own AUv3 Firmware-level chip emulation, enabled with the 56k cores option (requires M1 iPad or iPhone 15 Pro or newer): • Access Virus A, B and C — Motorola DSP 56300 recreation • Access Virus TI / TI2 / Snow — Motorola DSP 56300 recreation • Clavia Nord Lead 2X — Motorola DSP 56300 recreation • Waldorf microQ — Motorola DSP 56300 recreation • Waldorf Microwave XT — Motorola DSP 56300 recreation • Roland JP-8000 and JP-8080 — JE-8086 core by Giulio Zausa ANALOG SYNTHS • Oberheim Matrix-1000 — clean-room controller, no firmware needed, driving six CEM3396 voice models, with a MIDI CC for each of the 96 patch parameters and LFO sync to the host tempo or MIDI clock • Moog Minimoog Model D — CA-72 circuit model by Idle Foundry, with the original front panel, a Double voice section with Detune, Width and Entropy, three quality modes, 46 factory presets and .fxp / .fxb preset and bank support • OB-Xd 2 — discoDSP's synth after the Oberheim OB-X, OB-Xa and OB-8, with its own panel, 24 factory banks and its own AUv3 FM SYNTHESIS • Yamaha DX7 — clean-room controller, no firmware needed, driving the original EGS and OPS chip models from VDX7 by Charles Chiaccona • Yamaha OPL3 — Nuked OPL3 cycle-accurate FM by Nuke.YKT GM / GS SOUND MODULES • 88emu — Roland SC-88, SC-88VL, SC-88Pro, SC-8850 and SC-55mkII boards, emulation by Giulio Zausa, with GS variation, map and rhythm handling, program and drum kit names read straight from the board ROM, 16-part multitimbral operation, and a Standard MIDI File player with offline rendering to WAV or AAC. CHIPTUNE • Commodore 64 SID 6581/8580 — based on reSID. 3-voice polyphony, 8580 chip model with high-quality RESAMPLE, GoatTracker .sng / .ins bank loading and .sid file import (PSID/RSID), full macro playback engine and live MIDI control of cutoff (CC 74), resonance (CC 71), pulse width (CC 75), vibrato (CC 1) and pitch bend. • Ayumi (AY-3-8910 / YM2149) — the PSG behind the ZX Spectrum, Amstrad CPC, Atari ST and MSX. Ayumi emulation by Peter Sovietov, 3-voice polyphony, switchable AY / YM engine, .ay patch loading and 11 live CC controls. ORGAN • Hammond B3 with Leslie speaker — OpenB3, based on the setBfree engine by Michele Perrone. Upper, lower and pedal drawbars, percussion, vibrato and chorus, overdrive, reverb, three Leslie cabinets, keyboard split and .fxp presets ELECTRIC PIANO AND SAMPLER • Wurlitzer 200A — OpenWurli physical modelling by hal0zer0 (Rust ported to C++ by discoDSP) • Akai S1000 — SFZero sample engine by Steve Folta, with Bliss Sampler support and resampling engine by discoDSP (SF2 / SFZ / ZBP / ZBB) — KEY FEATURES — • Native AUv3 plug-in for AUM, Cubasis, GarageBand, Logic Pro and more • Standalone app for iPhone and iPad • Full MIDI control: CC, mod wheel, expression, pitch bend • 8-point sinc interpolation for sample playback • Auto-slice drum mapping and global retuning via MIDI • ROM firmware loading from original hardware • Background audio, iCloud and Files app integration • Optimised interpreter compatible with the iOS App Store sandbox • Boards: hardware-style control panels for 15 cores, with host parameter linking and NRPN input • MIDI out to the host or to a MIDI device, and an Editor Only mode that runs a board without the sound engine or firmware, to edit the original hardware