Comparison

Timecode Tool App vs Fadebank

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

Timecode Tool App

Features
Read full description

Timecode Tool is a focused utility for live-show technicians who need to generate, monitor, convert, measure or calculate SMPTE timecode on iPad, iPhone, and Apple Silicon Mac. Five tools: GENERATE • Output LTC audio and Art-Net Timecode driven by system time-of-day, a free-running 1-hour block, or a custom Start Timecode you type in (e.g. 02:03:20:15) that free-runs from that point. • A media-player transport while running — previous block, back to start of block, play/pause, next block. (Hidden for time-of-day, which follows the wall clock instead of a block you can skip through.) • Pick FPS (24, 25, 29.97 NDF, 29.97 DF, 30) including correct SMPTE drop-frame counting. • Send to a specific Art-Net destination IP (unicast or broadcast). MONITOR • A large, glanceable timecode readout for monitoring. • Choose the source: decode LTC from an audio input, or receive Art-Net Timecode over the network. Frame rate and lock state are shown live. CONVERT • Route one timecode input to up to two simultaneous outputs, freely chosen: input is LTC audio, Art-Net, or MTC; each output is LTC audio, Art-Net, or MTC. • MTC: Timecode Tool publishes a virtual MIDI port, "Timecode Tool", that shows up as a MIDI input in every other app on your device — your DAW can chase it with no cable or MIDI interface. Output can also go to a real MIDI destination, and input can come from any MIDI source. • Warns up front about setups that would misbehave: Art-Net in and out sharing a UDP port, LTC in and out on the built-in speaker and mic, and MTC feeding back into itself. • Latency compensation per output, with drift tracking and a re-sync control. Auto-detects the source frame rate and the drop-frame flag, with an override for 29.97 non-drop versus 30 fps. MEASURE • A delay checker. Tap the pad twice — or keep tapping along to a beat — and read the interval in milliseconds, frames at the rate you choose, timecode, BPM, seconds, or audio samples. • Then hear it: two clicks exactly that far apart, a click every interval, or your own taps replayed, placed on the audio clock to the sample. • A tap far from the others — a double tap, a missed beat — is flagged as it lands and left out of the statistics. Save a measurement with its taps, rate and statistic, and bring it back later. • Last, average, min, max and jitter at a glance; every unit has Copy. CALCULATE • A timecode calculator. Add, subtract, multiply and divide timecode, frames, seconds, milliseconds and h:mm:ss clock time in any mix — for example "01:03:40:15, one minute thirty-five later". • Pick each operand's unit on a sliding switch under the field. Shorthand accepted: 95s, 1500ms, 1m35s, 40f, or just digits into a timecode field. Paste into any field; the unit follows the text. • A sentence above the result says what was done — "Added 1 min 35 s to timecode 01:03:40:15" — and the result appears in every form at once, each with its own Copy, chaining back into the next calculation. Drop-frame arithmetic uses the same frame counting as the generator. • Measure and Calculate also work at 59.94 and 60 fps. Cross-cutting features: • Background audio — keeps generating / decoding when the screen is locked or another app is foreground. • Phone calls and Siri don't break the timecode stream; it resumes. • Shows your device's IP addresses. Works with Class-Compliant USB audio interfaces. Available in English, Japanese, Korean, Simplified Chinese, French and German. Timecode Tool does not collect, store, or transmit any personal data.

About

Fadebank

Features
Read full description

Fadebank turns an iPad, iPhone or Apple Watch into a control surface for your digital Open Sound Control mixing console — so the person running sound can stand in the room and hear what everyone else is hearing. Built for the volunteer, not the touring engineer. Console apps tend to put every parameter on screen at once, which is right for someone who already knows the desk and daunting for someone who does not. Fadebank shows you faders, mutes, meters and sends, in that order, at a size you can hit while holding a coffee. THE SURFACE Every input, bus, matrix, DCA and the main mix, laid out as channel strips with real fader travel. Live metering on every strip, and the main in stereo. Colors and names come straight off the console, so the desk you know is the desk you see. Tap a strip's name to open it: its scribble strip name and color, the preamp, gate, compressor, and a full parametric EQ with a curve you can drag. On iPad every strip carries a small EQ curve of its own — tap it to edit that EQ without leaving the surface. The small controls are tap-to-open rather than drag, because a twenty-point slider is no way to set a seventy-decibel range. Tapping opens a wide one with nudge buttons. SENDS ON FADER Pick a monitor bus and the whole surface becomes that mix. Every fader is now a send to it, and the caps turn blue so you can never be confused about which mix you are holding. Exit and you are back on the main. It is the fastest way to fix a monitor from the stage instead of shouting across the room. Four effects sends sit on every strip — verb, hall, delay and chorus by default, configurable to whichever buses your desk actually uses. The main strip shows those effects' own levels, so turning the reverb down is one tap. ON YOUR WRIST The Apple Watch app is a real control surface, not a remote for the phone. It talks to the console directly over Wi-Fi. Scroll the channels with the Digital Crown, turn the crown to set a level, tap to mute. Your console's address travels from the iPhone to the watch automatically, so there is no IP address to type on a wrist. TRY IT WITH NO CONSOLE IN THE ROOM Fadebank has a complete console simulator built in — a real implementation of the protocol, seeded with a plausible band patch and live meters. Open the connection sheet and tap Use Built-in Simulator. Learn the app on the bus, train a new volunteer on a Tuesday, or just see whether it suits you before you carry an iPad to church. HOW IT CONNECTS Fadebank speaks OSC over UDP directly to a compatible console on your own network. There is no cloud service, no account, and no sign-in. Nothing you do in this app leaves your local network, and nothing about you is collected — because there is nowhere for it to go. Put the console and your device on the same Wi-Fi, type the console's IP address, and you are mixing. REQUIREMENTS • A digital mixing console that accepts OSC control over your local network, reachable from your device. • iOS 17, iPadOS 17 or watchOS 10 and later • A Wi-Fi network shared with the console • Fadebank does not play audio, it is a remote control for OSC mixers Fadebank is an independent product, not affiliated with, authorized by or endorsed by any console manufacturer. All trademarks are the property of their respective owners.

Screenshots

Timecode Tool App4 screens
Fadebank4 screens

Verdict

The call

The clearest difference is price: Fadebank at Free against Timecode Tool App's $1.99. Fadebank also leads on update cadence (daily vs every 2 months). On ads, in-app purchases, device support and iOS requirement there is nothing between them.

Scored on Price Ā· Rating Ā· Positive reviews Ā· Number of ratings Ā· Update frequency Ā· Ads Ā· In-app purchases Ā· Monetization Ā· Best chart rank Ā· Devices Ā· Requires iOS

CostPrice Ā· In-app purchases Ā· Ads Ā· Monetization

Fadebank is free to download; Timecode Tool App costs $1.99 up front. Neither carries in-app purchases, so what you see is what you pay.

UpkeepUpdate frequency

Timecode Tool App ships an update every 2 months, Fadebank daily. The most recent releases landed on November 18, 2026 and November 13, 2026 respectively.

Scorecard2 real differences Ā· 4 level
Timecode Tool App versus Fadebank: the parameters behind the verdict, then further details
ParameterTimecode Tool AppFadebank
Price$1.99Free — better
Update frequencyEvery 2 monthsDaily — better
AdsNoNo
In-app purchasesNoNo
DevicesiPhone, iPadiPhone, iPad, Apple Watch — better
Requires iOS17.017.0
Further details — not scored
Size3 MB3 MB
Age rating4+4+
Developerllcheesell Inc.QUIVTEC, LLC

In-app purchases

None

Timecode Tool App

No in-app purchases

None

Fadebank

No in-app purchases

Questions

Is Timecode Tool App free?
Timecode Tool App costs $1.99, with no in-app purchases.
Is Fadebank free?
Fadebank is free to download, with no in-app purchases.
Do Timecode Tool App or Fadebank have ads?
Neither Timecode Tool App nor Fadebank shows ads.
Which is updated more often, Timecode Tool App or Fadebank?
Timecode Tool App ships an update every 2 months, and Fadebank daily. Most recently, Timecode Tool App was updated on November 18, 2026 and Fadebank on November 13, 2026.

Other comparisons