Stud Finder vs Stud Finder

Find studs behind drywall using your iPhone's built-in magnetometer. This app detects metal fasteners (the screws and nails holding your drywall to wood studs) and helps you locate stud lines behind your wall. HOW IT WORKS Your drywall is screwed into wooden studs roughly every 16 inches. This app picks up those screws by reading changes in the magnetic field as you sweep your phone across the wall. Find screws in a vertical line and you've found the stud. HOW TO USE Take your case off. Hold your phone flat against the wall. Sweep slowly left and right. When the signal spikes, there's metal nearby. Mark each spike, look for a vertical line of hits, and that's your stud. Drill a small pilot hole before you mount anything heavy. If the bit hits something solid, you're on the stud. If it punches right through, move an inch and try again. Takes 30 seconds. WHAT THIS APP CANNOT DO It detects metal, not wood. If there are no screws or nails in the wall where you're scanning, it won't find anything. It also won't work well through thick plaster, concrete, or tile. And it's not a replacement for a professional stud finder on structural work. For mounting a TV, hanging shelves, or putting up pictures on normal drywall, it works. No ads. No nag timers. No interruptions. PRIVACY No account. No tracking. No data leaves your phone.

Stud Finder - Bubble Level combines two essential DIY tools into one simple and powerful app. Use your device’s built-in sensors to monitor magnetic field activity and check level alignment for everyday projects around your home, office, workshop, or job site. Whether you're hanging picture frames, aligning shelves, mounting TVs, placing furniture, or scanning walls for magnetic changes, this app provides a clean and intuitive experience designed for accuracy, simplicity, and speed. MAGNETIC FIELD SCANNER Monitor live magnetic field readings directly from your device's magnetic sensor. Features: • Live magnetic field meter (µT) • Real-time magnetic signal monitoring • Magnetic activity graph • Peak signal tracking • Advanced sensor statistics • X, Y, and Z magnetic field values • Visual signal strength indicators • Haptic feedback support • Optional sound alerts • Easy calibration tools • stud finder Magnetic field monitoring can help identify areas containing metal objects, screws, nails, brackets, magnetic interference, and other magnetic sources. BUBBLE LEVEL TOOL Measure alignment using your device's motion sensors. Features: • Surface level mode • Wall and frame level mode • Real-time angle measurements • Horizontal alignment guidance • Roll and pitch monitoring • Precision level indicators • Visual bubble interface • Haptic feedback when level Perfect for: • Hanging frames • Shelf installation • Furniture alignment • Wall decor • Home improvement projects • DIY tasks • Workshop use • Everyday measurements ADVANCED TOOLS • Detailed sensor statistics • Live magnetic graph • detect wall studs • Peak value tracking • Sensor calibration • Adjustable alerts • Clean modern interface • Dark mode design • Fast and responsive performance • Stud finder app for iphone PRIVACY FIRST Stud finder - metal detector app works directly with your device sensors. No accounts, no sign-ups, and no unnecessary data collection. IMPORTANT Magnetic field readings depend on your device hardware and environment. Results may vary between devices and locations. This stud finder for iphone app is intended as a helpful measurement and reference tool and should not be relied upon as a substitute for physical stud finder - professional inspection or safety procedures. Disclaimer: This app uses your device’s magnetic sensor to measure magnetic field activity. It may help identify magnetic metal objects such as steel screws, nails, brackets, or metal studs. It cannot reliably detect wooden studs, plastic pipes, non-magnetic metals, electrical wiring, or hidden objects inside walls. Always verify before drilling or cutting into any surface. Download Stud Finder - Bubble Level today and bring powerful magnetic field monitoring and leveling tools together in one easy-to-use app.