新途蓝牙BMS vs MultiVolt

新途动力电池 App 是东莞市新途动力科技有限公司推出的电池设备管理工具，主要用于配合公司指定的蓝牙 BMS 电池设备使用，帮助用户通过手机查看电池运行状态和相关参数信息。 通过本 App，用户可以搜索附近的蓝牙 BMS 设备，并在连接成功后查看电池的实时数据，包括电池电压、电流、容量、剩余容量、充放电状态、温度检测、单体电压等信息，方便用户及时了解电池当前工作状态。 主要功能： 1. 蓝牙设备搜索 支持搜索附近可连接的蓝牙 BMS 设备，并显示设备名称、蓝牙地址、信号强度等信息，方便用户识别和连接设备。 2. 实时电池信息查看 连接设备后，可查看电池电压、电流、容量、剩余容量、充放电状态等运行数据，帮助用户直观了解电池状态。 3. 温度检测 支持查看电池相关温度数据，包括多个温度采集点信息，便于用户关注电池工作环境和运行情况。 4. 单体电压查看 支持查看电池组内单体电压数据，帮助用户更清楚地了解电池组内部状态。 5. 参数配置与设备设置 根据设备型号和权限支持部分参数查看与配置，具体功能以实际连接的 BMS 设备为准。 适用场景： 本 App 适用于使用东莞市新途动力科技有限公司相关锂电池产品或蓝牙 BMS 电池设备的用户，可用于电池状态查看、设备调试、运行监测和日常维护辅助。 注意事项： 1. 本 App 需要配合支持的蓝牙 BMS 电池设备使用。 2. 使用前请确保手机蓝牙已开启，并允许 App 使用蓝牙相关权限。 3. 不同设备型号支持的参数和功能可能存在差异，请以实际设备返回的数据为准。 4. 本 App 显示的数据仅用于设备状态查看和维护参考，具体电池使用请遵循产品说明和安全规范。 东莞市新途动力科技有限公司专注于锂电池及相关电池系统产品，本 App 旨在为用户提供更便捷的电池状态查看和设备连接体验。

MultiVolt shows what your camper batteries are doing — all of them at once. The app connects over Bluetooth directly to the battery management system and reads what it measures anyway: state of charge, voltage, current, power, every single cell voltage, temperature and the BMS protection flags. No account, no cloud, no internet. THE WHOLE BANK AT A GLANCE Several batteries add up to one balance — weighted by capacity, not simply averaged. A 200 Ah battery at 90 % and a 50 Ah one at 10 % make 74 % together, not 50 %. Runtime is calculated from the smoothed current: a cycling compressor fridge no longer makes the estimate jump between 40 hours and 2 hours. EVERY CELL ON ITS OWN Cell voltages as bars, the spread in millivolts, the active balancer. When a cell drifts away, you see it before the BMS shuts down. LIMITS YOU SET YOURSELF State of charge, cell voltage high and low, cell drift, temperature, charging in the cold, current. Per-battery limits where batteries differ — a 280 Ah battery takes currents a 100 Ah one does not. HONEST READINGS A value the BMS does not report shows as "--", never as zero. Zero is a statement; a missing value is not. When a protocol reports no protection status, it says so — instead of a reassuring green check mark. TRY IT WITHOUT A BATTERY Demo mode simulates three batteries with real LiFePO4 physics and stays free forever. You see the whole app before pairing anything. SUPPORTED SYSTEMS • Ective and identical Topband modules (also StartCraft, KiloVault, Wattstunde) • JBD / Xiaoxiang and equivalents • Daly Smart BMS (D2 series and relatives) FREE AND PRO One battery is free — with every reading, all limits, the history and all warnings. MultiVolt Pro monitors up to six batteries at once. IMPORTANT MultiVolt is a display and a log, not a safety device. No commands are sent over Bluetooth — the app only reads. Deep discharge protection, cut-off and overcurrent protection belong in the BMS and must work without a phone. SUBSCRIPTION AND TERMS MultiVolt Pro is a subscription with a monthly or yearly term. It renews automatically until it is cancelled; cancellation is done in the App Store account at least 24 hours before the current period ends. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: https://multivolt.dkcloud.at/privacy