CVOsc vs Proof Audio Analyzer
Price, ratings, monetisation and update history for both apps, side by side ā with what reviewers say about each.
CVOsc
Read full descriptionHide full description
Connect an Expert Sleepers ES-9, ES-8, or any class-compliant DC-coupled interface to your iOS Device, and visualize up to sixteen simultaneous channels of Control Voltage and audio ā no laptop, no patch cables to a computer. See your patch ⢠Up to 16 simultaneous channels in a paged, responsive grid ⢠Three display modes: All (every channel), Selected (just the channels you tag), and Overlay (selected traces superimposed on a single canvas for phase and correlation work) ⢠Per-channel range, offset, and time base, in volts for CV and normalized units for audio ⢠Auto-trigger on zero crossing for rock-steady waveforms ⢠Auto-fit to waveform when you just want the trace centered ⢠Independent CV vs Audio mode per channel, with renameable identities ("VCO 1", "LFO Slow", etc.) Listen in ⢠Built-in live monitor: route any input channel to any physical output of the interface ⢠Monitor multiple channels simultaneously, each to its own output ⢠Output assignments persist across sessions ⢠Hot-plug aware ā disconnect and reconnect, and CVOsc rebinds automatically Pro features (auto-renewing annual subscriptions) ⢠Tuner ā pitch detection that works on both CV pitch signals and audio. See note name and cents offset live in the pane. ⢠Record & Playback ā capture every selected channel to its own WAV file, then play recordings back through the interface. CV recordings are routed only to DC-coupled outputs; the app warns you if you try otherwise. Live monitoring and playback share the same USB pipeline, so you can play recordings while monitoring live channels at the same time. ⢠Saved Channel Settings ā every channel comes back exactly the way you left it on the next launch. ⢠Presets ā save and recall whole-rig configurations: channel names, signal types, all scale settings, monitor routings ā under a single name. Each subscription is independent. Restore Purchases in Settings re-entitles anything you've previously bought on this Google account. Cancel anytime; cancellations take effect at the end of the current billing period. Hardware requirements CVOsc requires a class-compliant USB audio interface and a USB-C OTG cable. To visualize CV signals (not just audio), the interface must be DC-coupled. A powered USB hub is recommended for tablets that don't supply enough bus power. Supported DC Coupled USB Sound Cards Expert Sleepers - ES-9 (14 ch) - ES-8 (8 ch) - ES-3 (8 ch) - ES-40 (8 ch) Solid State Logic - SSL 2 MKII (2 ch) - SSL 2+ MKII (4 ch) - SSL 12 (4 ch) - SSL 18 (10 ch) - SSL ALPHA 8 (8 ch) MOTU - M2 / M4 / M6 (2 / 4 / 6 ch) - UltraLite-mk5 (10 ch), UltraLite AVB (8 ch) - 624 (6 ch), 8A (8 ch), 8M (8 ch), 10pre (8 ch), 16A (16 ch), 24Ao (24 ch) - 1248 (8 ch), 828 (8 ch), 828es (8 ch), 848 (12 ch) RME - Fireface UCX II (6 ch) Universal Audio - Apollo Twin / Twin MkII / Twin X / Twin USB / Twin X USB (4 ch) - Apollo x4 (6 ch), x6 (8 ch), x8 (10 ch), x8p (10 ch), x16 (18 ch) Native Instruments - Komplete Audio 6 MK2 (4 ch) Non-DC Coupled interfaces still work for audio I/O; they just won't pass the validator's DC-coupling check for CV playback. EULA: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy: https://cvosc.com/privacy.html
Proof Audio Analyzer
Read full descriptionHide full description
Open Proof and ten instruments run on whatever input you have: RTA, oscilloscope, spectrogram, XY scope, signal generator, SPL meter, level meter, LUFS meter, dosimeter and a transfer function. No account, no trial clock. That half is free and stays free. MEASURING IS THE PAID HALF, AND THE POINT OF IT IS THAT THE RESULT LEAVES A four-second log sweep, separated into the fundamental and its harmonics by Farina's method. What you get back is a file, not a screenshot. Records are plain readable text with a content hash, re-hashed on open rather than trusted: an edited record says so and is refused rather than drawn. Anyone can open and verify one free, paid or not. Export the record, or on the Mac as text or CSV, into REW, a spreadsheet or a driver tool, with the floor beside every value. So a result can be handed to a client or a colleague, and they can check it themselves. WHY THE NUMBERS ARE WORTH HANDING OVER Before it measures your device, Proof measures your interface: its own noise and distortion, frequency by frequency. Every reading is then held against that floor. Clear of it, you get a number. Near it, a range, never a plus-or-minus: a floor can only push a reading up. At or under it, an inequality with no digits: "quieter than this instrument can hear". Significant figures are derived, not chosen: four figures means the instrument is entitled to four. LIVE ⢠RTA: fractional-octave spectrum, bars or line, A/C/Z weighting, averaging, peak hold ⢠Oscilloscope: triggered, with source, slope and level on the graticule ⢠Spectrogram: a colour map monotonic in lightness, so brighter is louder ⢠Signal generator: sine, sweep, pink and white ⢠XY scope: Lissajous and correlation. One channel in this version ⢠SPL meter: A, C or Z weighting, fast or slow, with Leq and max ⢠Level meter: peak and RMS in dBFS ⢠LUFS meter: momentary, short-term and integrated, ITU-R BS.1770-4, gated to EBU R128 ⢠Dosimeter: dose and projected 8-hour TWA, 85 dBA, 3 dB exchange ⢠Transfer function: magnitude, phase and coherence; the trace stops where coherence fails rather than thinning MEASURE ⢠Frequency response, bounded by the measured noise spectrum rather than the distortion floor, because a level is not a ratio ⢠Harmonic spectrum, H2 to H5, each point bounded by the floor at its own frequency ⢠THD against frequency, with the floor for a sum of orders raised the way a power sum requires ⢠THD against level: a sweep per rung, unbounded because a floor from one drive is wrong at both ends of a ladder ⢠The impulse response, and from an acoustic capture its energy-time curve, RT60 per octave band and cumulative spectral decay ⢠Impedance against frequency, through a sense resistor whose value you measure ⢠Microphone calibration from a miniDSP or REW file, corrected at each harmonic's own frequency, with the capsule serial and file hash in the record ⢠A trust tier (Unverified, Floor measured or Calibrated), computed on every read, never stored, so a file cannot claim one it has not earned ⢠A library that browses, verifies, compares and exports THE LIMITS, NAMED ⢠All nine lenses compute. ETC, RT60 and waterfall want an acoustic capture, meaning a microphone with its calibration file loaded; impedance wants a sense-resistor jig. Each says which, and why ⢠SPL reads dBFS until you calibrate against a 94 or 114 dB reference; the dosimeter shows nothing until it does ⢠On a rig with two uncorrected clocks Proof does not report phase or arrival time, and says so ⢠The signal generator writes into whatever you have connected. It is the only tool here that can do damage Proof connects to the App Store for your purchase and to nothing else. No account, no analytics, no crash reporting. Nothing you measure leaves your device unless you export it. Records go to a Proof folder in Documents, reachable from Files. Mac, iPad and iPhone are one app: buy once, use all three. A swept measurement wants an interface you can loop back.
Screenshots
Verdict
The clearest difference is iOS requirement: Proof Audio Analyzer at 16.0 against CVOsc's 26.4. On price, ads, in-app purchases and device support there is nothing between them.
Scored on Price Ā· Rating Ā· Positive reviews Ā· Number of ratings Ā· Update frequency Ā· Ads Ā· In-app purchases Ā· Monetization Ā· Best chart rank Ā· Devices Ā· Requires iOS
Both are free to download. CVOsc sells 4 in-app purchases, starting at $0.99 per year and Proof Audio Analyzer sells 1 one-off in-app purchase. Whichever you choose, the download price is not the number that matters.
| Parameter | CVOsc | Proof Audio Analyzer |
|---|---|---|
| Price | Free | Free |
| Update frequency | Every 6 weeks | ā |
| Ads | No | No |
| In-app purchases | Yes | Yes |
| Devices | iPhone, iPad, Mac ā better | iPhone, iPad |
| Requires iOS | 26.4 | 16.0 ā better |
| Further details ā not scored | ||
| Size | 6 MB | 6 MB |
| Age rating | 4+ | 4+ |
| Developer | Aleph Void LLC | Warren Labs |
In-app purchases
CVOsc
- CVOsc Annual Tuner$0.991 Year
- CVOsc Annual Recording$0.991 Year
- CVOsc Preset Annual$0.991 Year
Show 1 moreShow fewer
- CVOsc Annual Convert To Gate$0.991 Year
Proof Audio Analyzer
- Measuring$79.00









