MultiBMS vs SwitchPilot for Wemo

Most battery apps show you one pack. MultiBMS shows you the whole system. Connect every Bluetooth BMS you own, group them the way they're actually wired, and watch the entire bank behave as one — voltage, current, power, state of charge, temperature, capacity and every individual cell, live. SEE THE WHOLE BANK AT ONCE Build a group from any number of packs and MultiBMS aggregates it properly — parallel banks sum their current and capacity, series strings sum their voltage. One gauge for the bank, and every pack underneath it. Six batteries in an off-grid build read as one system instead of six apps you keep switching between. EVERY CELL, FOUR WAYS Bars, heat map, rows or grid. Minimum, maximum and delta across the whole bank or per pack, with the weak cell called out before it becomes a problem. Watch the balancer work in real time. RECORD WHAT ACTUALLY HAPPENED Start a recording and MultiBMS logs the run at one-second resolution. Pick a Battery Bank preset for a house system or a Vehicle preset for a ride, choose exactly which metrics to capture, and add per-cell and per-pack detail when you want the full picture. A live dyno cockpit shows the run as it happens — speed, volts, amps, kilowatts, state of charge, G-force — with peak draw, peak power and energy pulled tracked as you go. REPLAY IT LIKE FOOTAGE Cinema Replay plays any recorded run back as a scrubbing timeline with every channel drawn together. Find the moment the voltage sagged, the moment the pack got hot, the moment you hit peak power. Then export it: CSV for a spreadsheet, a formatted PDF report, or a share card that fits in a message. ON YOUR WRIST The Apple Watch app is a full second screen, not a notification relay. A live dyno cockpit that mirrors the run on your phone. Race Control with lap timing and per-lap energy. Ride profiles for e-bikes, karts and carts with GPS speed, distance and G-force. Fleet and cell views for the whole bank. Start and stop a recording from your wrist and the phone follows. ALERTS THAT MATTER Set your own limits for pack temperature, low pack voltage and low cell voltage. MultiBMS tells you the moment something crosses the line, whether you're looking at the app or not. MAKE IT LOOK LIKE YOUR RIG Thirteen interface skins, from an off-grid instrument bay to a racing cluster, marine, aviation, industrial and a retro terminal. Four dyno themes for the recorder. Four charge-flow animations — rail, orbit, mist and plasma — so charging and discharging read at a glance from across the room. WORKS WITH YOUR HARDWARE MultiBMS speaks 30 Bluetooth Low Energy BMS protocols covering drop-in lithium packs, server-rack storage, active balancers, shunt meters and portable power stations. Support varies by model and firmware — the full, current compatibility list lives at multibms.com. Not sure yours is covered? Email support@multibms.com with your battery and BMS model. We add protocols, and we're quick about it. READ-ONLY BY DESIGN MultiBMS reads telemetry. It does not write settings, change limits or reconfigure your BMS. Your battery keeps doing exactly what it was doing. NO ACCOUNT, NO SUBSCRIPTION No sign-up, no cloud, no recurring charge. Your data stays on your device. Premium skins are optional one-time purchases.

SwitchPilot is the local-first way to control the smart plugs and switches you already own. It talks to compatible Wemo and Kasa devices directly over your home Wi-Fi — no cloud account, no remote server, and nothing that stops working when a company shuts a service down. Built after a popular smart-home cloud (Wemo) was discontinued, SwitchPilot exists for a simple reason: the hardware on your walls still works perfectly. The service behind it went away, but the silicon didn't. SwitchPilot puts you back in the pilot's seat. WHY SWITCHPILOT • Local Wemo and Kasa control. Commands go straight to the device on your network. If your internet is down, your switches still aren't. • No SwitchPilot account required. Nothing to sign up for. Your devices and your home layout stay on your phone. • Bring your existing gear. Keep the plugs, switches, and dimmers you already own instead of replacing a drawer full of working hardware. • Fast and direct. Wemo and Kasa commands do not make a round-trip to a server just to turn off a lamp. WHAT YOU CAN DO • Discover devices automatically on your Wi-Fi, or add one by hand using its IP address when you want precise control. • Control compatible devices directly and refresh their reported state. • Organize devices into groups that match how your home actually works — "Living Room," "Gym Lights," "Outdoor" — and switch a whole group at once. • Rename supported devices directly from SwitchPilot. • Create on/off schedules on supported devices, so compatible routines can continue without SwitchPilot remaining open. • Reorder and collapse groups to keep a tidy dashboard. • Keep your most-used switches on a Favorites tab, and drag them into the order you want. That order follows you to Apple Watch and Favorites widgets. • Switch Wemos from Apple Watch. Browse Favorites or every switch by room; your nearby iPhone handles the connection, even when locked. • See Wemo status in Home Screen, Lock Screen, and StandBy widgets. On iOS 17 or later, tap a Home Screen tile to switch it. • Use Siri or Shortcuts to turn a switch on or off, toggle it, or get its state, including in automations while the app is closed. • Retrieve a compatible Wemo’s setup code and add it to Apple Home. • Control Cync (C by GE) lights with optional sign-in to GE’s service. • See live switch updates and your current Wi-Fi network on the Dashboard. • Choose whether SwitchPilot opens on Dashboard or Favorites. • Open SwitchPilot on a Mac with Apple silicon. PRIVACY BY DESIGN SwitchPilot doesn't have a cloud to send your data to. Device names, groups, and layout live on your phone. Wemo and Kasa control happens on your local network. There's no SwitchPilot account or tracking server; Wemo and Kasa commands have no third party in the middle. WHO IT'S FOR • Anyone left with smart plugs after a cloud service was discontinued. • People who moved newer gear to another ecosystem but still have older smart plugs they don't want to toss. • Anyone tired of stitching together third-party apps and workarounds just to flip a switch. Your hardware already works. SwitchPilot just lets you fly it — locally, on your own terms. --- Compatibility: SwitchPilot works with compatible Wemo and Kasa smart plugs and switches on your Wi-Fi network. Cync (C by GE) lights are supported through optional Cync account sign-in and GE’s service. SwitchPilot is an independent app and is not affiliated with, endorsed by, sponsored by, approved by, or officially supported by Belkin, Wemo, TP-Link, Kasa, GE, or Cync. References to those names identify compatible third-party device families and do not imply a partnership. All product names, trademarks, and registered trademarks are the property of their respective owners.