Angle Finder vs Level Tool

Is the shelf actually level? Set your phone on it and know in two seconds. Angle Finder turns the motion sensor into a spirit level, inclinometer and plumb tool: a round bubble for surfaces, a plumb readout for walls and posts, and slope in degrees, percent or millimetres per metre. It reads gravity through CoreMotion's fusion filter — not raw accelerometer noise — so the number settles fast and stays put. Lay the phone flat and you get the bubble; stand it on an edge against a door frame and it switches to plumb mode on its own, because those are two different measurements and the app knows which one you need. WHAT YOU GET • Set the phone on the shelf and watch the bubble drift to the high corner — nudge the shim until it sits dead centre • Stand the phone against a stud, post or picture frame and read exactly how many degrees to rotate to plumb • Read slope your way: 1.2°, 2.1% or 21 mm/m — the fall your drain or ramp needs, straight off the dial • Tap Hold with the phone pressed under a joist, pull it out, and read the frozen number in the light • Zero against a surface you trust, so a slightly tilted bench stops polluting every reading after it • A haptic tick the instant you hit level, so your eyes stay on the picture wire, not the screen PERFECT FOR • Renters hanging pictures, mirrors and floating shelves without a second pair of hands • DIY TV mounting — check the bracket is level before you drill, plumb after • Carpenters and site work: pitch and roll at once, ratio rise, mm-per-m fall • RV and trailer campers levelling the rig before the fridge complains WHY NOT JUST THE BUILT-IN MEASURE APP? Apple's level shows one view in one unit. It has no slope percent, no mm/m, no hold button, no zero calibration, no haptic level alert and no target fall. The moment you need "2% towards the drain" instead of "roughly flat", it is out of its depth. PRIVATE BY DEFAULT Every reading comes from the motion sensor, on the device. No account, no location, no tracking, no data leaving your phone. FULL ACCESS Full Access unlocks the repeat-work tools: saved zero presets (zero against a bench, a jig, a van floor — and switch between them without re-zeroing) and target angle mode, which shows your distance from a chosen fall like 2% for a drain instead of distance from level. Choose a weekly or yearly auto-renewing subscription, or a one-time lifetime purchase. Put your phone on the surface and find out what "level" really looks like. Terms of Use: https://leanstudio.asia/terms-of-use Privacy Policy: https://leanstudio.asia/privacy-policy Support: support@leanstudio.asia

Level Tool turns your iPhone into a precise spirit level, bubble level, angle finder and laser level. BUBBLE LEVEL • Bar level for walls, frames and shelves • Bullseye level for tables and flat surfaces • Large readout with 0.1° precision, green flash and haptic tap when level ANGLE FINDER • Protractor / inclinometer with degrees, percent and mm/m • Deviation from the nearest axis at a glance LASER LEVEL • Project a level line over your live camera view to align anything on the wall MEASURE & SAVE • Hold a reading, save it and review it later in History • Calibrate on any known level surface for maximum accuracy Perfect for hanging pictures, mounting shelves and TVs, DIY, carpentry and construction — right from your pocket. ---------------- LEVEL TOOL PRO Unlock Pro with an auto-renewing subscription ($4.99/week or $19.99/year) or a one-time Lifetime purchase ($29.99). Prices may vary by region. Payment will be charged to your Apple ID account at confirmation of purchase. Subscriptions automatically renew unless canceled at least 24 hours before the end of the current period. Your account will be charged for renewal within 24 hours prior to the end of the current period. You can manage and cancel your subscription in your App Store account settings after purchase. Terms of Use (EULA): This app uses Apple's standard EULA: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: https://docs.google.com/document/d/1uBAatqlwycG2X9RN2XtvogTsIzooaZzZlurMlts1ZvU/edit?usp=sharing Support: https://sites.google.com/view/leveltoolbubblelaser