Level vs Sound Amplifier +
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Level
This app provides accurate sound level measurements with customizable readings and reference signals. It offers calibrated microphone support for precise audio analysis and speaker setup, with a clear interface and no intrusive ads or purchases.
- Live decibel reading with A/C/Z weighting
- Customizable display of six readings (Leq, Min, L90, L10, Peak, Time)
- Reference signal generator (pink noise, white noise, tones)
- Calibrated microphone support for true SPL
- Overload flag and peak-hold maximum
- Full VoiceOver support
Read full descriptionHide full description
Level is a fast, honest sound-level meter for iPhone. A big live decibel reading, with Leq, Min, L90, L10, Peak, and elapsed time alongside it — show up to four, arranged the way you want. It tells you when the sound is louder than the mic can measure. A reference generator and calibrated-mic support are there for speaker work or true SPL. One clean instrument, not a busy suite. FEATURES - Big decibel reading — A/C/Z weighting, Fast (125 ms) or Slow (1 s) response - Six readings, up to four on screen: Leq (energy-average), Min, L90 (background level — exceeded 90% of the time), L10 (exceeded 10% of the time), Peak (true instantaneous peak), and Time (how long you've been measuring). Always computed; show only what you need - Arrange the readings yourself — hold one on the meter and drag it, or reorder in Settings. On iPhone Duo's open display, all six show - Overload flag — "Current · OVER" and a tick on the meter while the sound is louder than the mic can measure; Peak stays marked for the rest of the measurement. Tap either to see what it means - Peak-hold "Max" — a marker holds the loudest moment; tap the meter to start a new measurement - Control bar — play, the mic and output in use, and the signal, together at the bottom of the screen - Reference signals: pink noise, white noise, ten octave tones (31.5 Hz–16 kHz), level-matched. 1 kHz tone pairs with a 94 dB calibrator - Play any output — iPhone speaker, AirPlay, Bluetooth, or USB — while the meter keeps reading - Calibrated-mic support: Dayton iMM-6C, miniDSP UMIK-1/UMIK-2/EARS, Behringer ECM8000, REW. Frequency correction plus a true-SPL anchor from the file's 1 kHz sensitivity - Set to 94 dB — fit a calibrator over the mic, tap once, and Level trims itself to the tone. Each mic keeps its own offset - Share card — current reading, your readings as arranged, and the level bar - Fits iPhone Duo — closed, open, and open held wide - Full VoiceOver support - No account, no analytics, no third-party SDKs, no in-app purchases, no network connections HOW IT WORKS Open Level, allow the microphone, and read the room. Turn on up to four readings in Settings → Readings to see them beside the live number; hold one on the meter to move it. Tap the meter to reset Max and every reading and start a new measurement — Time starts over too. If the sound is louder than the mic can measure, Level says so: OVER appears beside the live number, and Peak stays marked until you reset. Tap the mark to see what it means. For speaker work, the control bar has it all: play sends the reference signal — pink noise for level-setting, white noise for tweeters, an octave tone for room modes, or the 1 kHz tone against a 94 dB calibrator — and the mic, output, and signal buttons switch each in a tap. With the built-in mic, readings are approximate but honest and well-behaved. A calibrated USB mic and its cal file give true SPL. Either way, Level is a measurement tool, not a certified Type 1/2 instrument. GREAT FOR - Checking if a room, party, nursery, or workspace is too loud - Home theater/hi-fi — matching channels, setting levels, dialing in a subwoofer - Car audio — matching and balancing components - Live-sound hobbyists and DIY speaker builders - Anyone who wants an honest number without a pro suite PRIVACY Audio is measured live only — never recorded, written to disk, or transmitted. No account, no analytics, no in-app purchases, no network connection at all. QUICK START 1. Open Level, allow the microphone 2. Read the big number (A-weighted by default) 3. Settings → Readings: turn on up to four of Leq/Min/L90/L10/Peak/Time; hold one on the meter to move it 4. Tap the meter to reset Max and every reading 5. For speaker work: tap play in the control bar; the buttons beside it switch mic, output, and signal IMPORTANT Level is a general-purpose meter, not a certified Type 1/Type 2 instrument. Built-in mic readings are approximate; a calibrated USB mic with a cal file gives true SPL.
Sound Amplifier +
Enhance your hearing by amplifying ambient sounds and voices through your phone's microphone and earphones. Adjust audio with an equalizer, replay recent sounds, and personalize settings with a hearing test. This tool is designed for everyday listening assistance.
- Real-time sound amplification
- Replay last 10 seconds
- Personalized EQ via hearing test
- Voice leveller
- Noise reduction
- 3-band equalizer
- Save custom setups
Read full descriptionHide full description
Sound Amplifier picks up the voices and sounds around you with your phone's microphone and plays them into your earphones in real time — so a soft-spoken friend, the TV across the room or a lecture from the back row comes through more clearly. Missed what someone just said? Tap Replay last 10s to hear the last 10 seconds again. Want the sound shaped for your own ears? Take the short Hearing Test and a personal EQ is built from your answers. Please note: Sound Amplifier is an everyday assistive listening tool. It is not a medical hearing aid and it does not diagnose hearing loss. LISTEN • Live amplification from 0 to +40 dB, with a live level meter • Replay the last 10 seconds — kept in memory only and cleared when you stop • Voice leveller that evens out loud and soft voices automatically • Noise reduction that cuts low rumble from air conditioning, traffic and wind TUNE • 3-band equalizer: bass, mid and treble, each ±12 dB • Presets for Speech, Music, Outdoor and Flat • A Personal preset created from your Hearing Test • Left/right balance for when one ear needs more HEARING TEST • Soft tones at 250, 500, 1,000, 2,000, 4,000 and 6,000 Hz, one ear at a time • Turn the result into a personal EQ with one tap • Hearing over time: compare later tests with your first one (changes under 10 dB are shown as no change) • Earphones or headphones are required, because each ear is tested separately MY SETUPS • Save up to 8 named setups — TV, restaurant, lecture — and bring one back with a tap SAFETY • A safety limiter caps loud peaks at a level you choose (-18 to 0 dBFS) • The app will not amplify through the phone's own speaker, where the microphone would pick the sound up again and howl • If your earphones disconnect, amplifying stops and a card explains why; reconnect them and tap Resume GOOD FOR • TV dialogue without turning the room volume up for everyone • Conversations in cafés, restaurants and family dinners • Lectures, sermons, meetings and guided tours • Birdsong and quiet sounds on a walk Tips: start with low amplification and raise it slowly. Wired earphones have the shortest delay; Bluetooth earphones work too but add a little lag. If you are worried about your hearing, please talk to a hearing professional.
Screenshots
Verdict
The clearest difference is rating: Level at 5.0 against Sound Amplifier +'s 4.1. Level also leads on ads (none vs shown) and monetization model (free vs ad-supported). Sound Amplifier +'s advantage is ratings volume (15 vs 1) and update cadence (every 5 days vs every 2 weeks). On price, in-app purchases, device support and iOS requirement there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. Neither carries in-app purchases, so what you see is what you pay.
Level holds the better App Store score, 5.0 against 4.1. That said, the two scores are not equally well evidenced: Sound Amplifier + has 15 ratings behind it against 1, so its average is the more settled of the two.
Level ships an update every 2 weeks, Sound Amplifier + every 5 days. The most recent releases landed on November 13, 2026 and November 18, 2026 respectively.
| Parameter | Level | Sound Amplifier + |
|---|---|---|
| Price | Free | Free |
| Rating | 5.0 (1 ratings) — better | 4.1 (15 ratings) |
| Positive reviews | — | 0.0% of reviews |
| Number of ratings | 1 | 15 — better |
| Update frequency | Every 2 weeks | Every 5 days — better |
| Ads | No — better | Yes |
| In-app purchases | No | No |
| Monetization | Free — better | Ad-supported |
| Devices | iPhone | iPhone |
| Requires iOS | 17.0 | 16.4 — better |
| Further details — not scored | ||
| Size | 1 MB | 88 MB |
| Age rating | 4+ | 17+ |
| Developer | Carl Sieber | heekyung moon |
Customer experience
Level
Sound Amplifier +
In-app purchases
Level
No in-app purchases
Sound Amplifier +
No in-app purchases









