Comparison

PlantCalculator vs ProcessChem

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

PlantCalculator

Features
Read full description

The nameplate reads "52.7 kg/cm²G." Your reference is in psi. The formula wants MPa. You can stop doing that conversion in your head. Plant Calculator brings together the calculations used every day in refinery and chemical plant equipment inspection — one app, built for the field. ■ Type the number on the nameplate, as-is Every input field has a unit selector. Enter kg/cm²G, psi or bar exactly as written, and the app does the conversion. If you think in kg/cm², set it as your default in Settings and every screen opens that way. 15 categories, 65 units. ■ Works where there's no signal Inside a vessel, inside a tank — every calculation runs entirely on your device. ■ Enter only what you already know - Pick a nominal size and schedule, and OD and wall are filled in (ASME/JIS, 45 sizes) - Pick a material and temperature, and the allowable stress is interpolated and filled in (9 materials) No more flipping through dimension tables. ■ Main features - Quick Check: from pipe and inspection data, review original wall, required thickness, corrosion rate, remaining life and thickness margin together - Required thickness: minimum wall for piping and pressure vessels under internal pressure (JIS B 8265 / High Pressure Gas (KHK), ASME Sec.VIII Div.1, ASME B31.3; cylinders, heads, straight pipe and elbows) - Corrosion rate & remaining life from previous/current thickness and elapsed years - Metal loss check: average, minimum and variation from readings, with simplified general and local metal-loss checks - Vertical tower check: internal pressure, dead weight, wind and seismic (static seismic coefficient method); checks tension and compression for operating and shutdown cases and shows a reference thickness. Skirt included - External pressure: simplified allowable external pressure check for cylinders - Nozzle reinforcement: area replacement method - Relief valve sizing: required orifice area based on API 520 - Piping: support span, pressure drop and velocity - Vessel: flange, bolt torque, flat plate, cone and support loads - Surface area: outer area of pipe, elbow, head and reducer; add count and insulation thickness for painting/cladding area and a material estimate - Tank / line totals: connect elements to sum area, volume and weight - Thermal expansion from temperature difference - Calculator + equation solver: scientific calculator (trigonometry, logs, powers, roots, memory, EE input, DEG/RAD) that also solves simultaneous equations in x, y and z - Unit conversion: 15 categories, including multiplication and division with units (e.g. 200 mm × 200 mm = 0.04 m²) - Size quick reference: NPS to OD, wall, ID, volume and pipe weight - Pipe dimension lookup: pick a size to see OD and wall per schedule (ASME B36.10M/B36.19M / JIS, physical dimension reference values) - Flange rating check: enter the rated pressure from your standard and compare with design pressure (ASME B16.5, etc.; rating table not bundled) - Material list: temperature-dependent allowable stress reference values (based on High Pressure Gas example standards) - Glossary for inspection and design terms - Calculation history: save, delete and copy as CSV - 8 languages (Japanese, English, Español, Português, 한국어, Deutsch, العربية, Русский), dark mode ■ Important This app is a supporting tool for design and inspection. Formulas are representative, and allowable stresses, dimensions and ratings are approximate reference values. Always verify against the official formulas and latest values of the applicable codes (JIS B 8265 / High Pressure Gas example standards / ASME Sec.II Part D / B16.5 / B36.10M, etc.) before making any decision. Do not rely on this app's results alone.

About

ProcessChem

Read full description

ProcessChem puts a chemical engineer's property tables, equation-of-state solvers, and unit-operation calculators in your pocket — no spreadsheet, no lookup binder, no internet connection required. PROPERTY LOOKUPS Pull density, viscosity, thermal conductivity, heat capacity, vapor pressure, heat of vaporization, compressibility factor, and surface tension for thousands of pure chemicals and mixtures. Hazard and safety data included: flash point, flammability limits, exposure limits, and carcinogen/GWP/ODP flags. Also covers five common polymers (HDPE, LDPE, PP, PET, PVC) by repeat-unit mass, for property lookups and the Heater case. PHASE EQUILIBRIUM & FLASH CALCULATIONS Heat, cool, compress, expand or throttle a fluid and see the phases it ends in. Specify temperature, pressure, enthalpy, entropy, internal energy or volume to find the resulting phase state and composition. Powered by CoolProp's reference-quality equations of state for over 100 fluids, with a Peng-Robinson backend covering the rest. Solids in the feed, such as dry ice, are handled too. REACTIONS & EQUILIBRIUM Balance chemical reactions automatically, track excess reagent and conversion, and run full energy balances. A dedicated equilibrium solver finds multi-species reaction composition at any temperature and pressure by Gibbs energy minimization. An electrochemistry mode computes cell voltage and electron balances for electrolysis and battery chemistry. MULTI-COMPONENT MIXTURES Peng-Robinson with ChemSep binary interaction parameters, bubble/dew point calculations, and per-component hazard data — across every mode in the app. PROCESS ENGINEERING CASES - Heater: heats or cools a batch or stream at constant pressure — give a final temperature and get the duty, or give a duty and get the temperature reached, melting and boiling included - Vessel Heater: a sealed, rigid vessel heated or cooled — finds the resulting pressure, phase and liquid level, and flags the liquid-full overpressure hazard - Fluidized Bed: finds the minimum fluidization and blow-out velocities for your gas rate and the resulting pressure drop, with reacting-bed conversion and composition in both batch and continuous-flow modes - Heat Exchanger: two streams exchange heat — give the duty or one outlet temperature and it finds the rest, refusing any pairing that would need heat to flow backwards - Reactor: plug flow, mixed flow or batch, sized from the reaction's rate law — find the volume for the conversion you need, or the conversion a given reactor reaches SAVE YOUR WORK Save any calculation by name, open it again from one Saved cases list covering the whole app, or write it to a file in Files or iCloud Drive, so your work survives even if you delete the app. UNITS, YOUR WAY A dedicated Units tab lets you pick your preferred unit for every quantity in the app, with a configurable Normal/Standard reference for gas-volume conversions. Light and dark appearance are available from the ⋯ menu. Every value has an information sheet showing where it came from, and the documentation at processchem.no explains each calculation. Built for process, chemical, and plant engineers, students, and anyone who needs a real thermodynamic answer faster than a lookup table can give one.

Screenshots

PlantCalculator4 screens
ProcessChem4 screens

Verdict

The call

The clearest difference is ads: ProcessChem at none against PlantCalculator's shown. PlantCalculator's advantage is update cadence (every 9 days vs every 6 weeks) and iOS requirement (13.0 vs 15.0). On price, in-app purchases and device support there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. Neither carries in-app purchases, so what you see is what you pay.

UpkeepUpdate frequency

PlantCalculator ships an update every 9 days, ProcessChem every 6 weeks. The most recent releases landed on November 18, 2026 and November 19, 2026 respectively.

Scorecard3 real differences · 3 level
PlantCalculator versus ProcessChem: the parameters behind the verdict, then further details
ParameterPlantCalculatorProcessChem
PriceFreeFree
Update frequencyEvery 9 days — betterEvery 6 weeks
AdsYesNo — better
In-app purchasesNoNo
DevicesiPhone, iPad, iPodiPhone, iPad, iPod
Requires iOS13.0 — better15.0
Further details — not scored
Size25 MB414 MB
Age rating4+4+
DeveloperRyo IidaRon Mangalam Jacob

In-app purchases

None

PlantCalculator

No in-app purchases

None

ProcessChem

No in-app purchases

Questions

Is PlantCalculator free?
PlantCalculator is free to download, with no in-app purchases.
Is ProcessChem free?
ProcessChem is free to download, with no in-app purchases.
Do PlantCalculator or ProcessChem have ads?
PlantCalculator shows ads; ProcessChem does not.
Which is updated more often, PlantCalculator or ProcessChem?
PlantCalculator ships an update every 9 days, and ProcessChem every 6 weeks. Most recently, PlantCalculator was updated on November 18, 2026 and ProcessChem on November 19, 2026.

Other comparisons