Comparison

Sweep vs Remote97

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

Sweep

Analyze your speaker's frequency response directly from your listening position. This app plays a log sweep and captures the sound with your iPhone's mic or a calibrated external mic, then displays the results. Easily compare multiple measurements to fine-tune your audio setup.

Highlights
  • Log sweep playback (20 Hz–20 kHz)
  • Frequency response plotting
  • Overlay up to 5 measurement runs
  • Frequency scrubbing with peak/trough snapping
  • Adjustable real-time smoothing
  • Built-in test tone and live meter
  • Export capture charts as images
Features
Read full description

See how your speakers really sound. Sweep plays a log sweep through your speaker and plots its frequency response — measured from your listening position. No laptop, no audio interface, no mic stand. Just your iPhone or iPad, a calibrated mic, and a clear picture of what you're hearing. The untethered scout between full bench sessions — the fast check from your chair you'll actually run. A minute, not an afternoon. SWEEP. CAPTURE. COMPARE. • Sweep — tap once and a 20 Hz–20 kHz log sweep plays through your speaker (the Farina ESS method the bench tools use). • Capture — a calibrated measurement mic (Dayton iMM-6C, miniDSP UMIK-1/UMIK-2/EARS, Behringer ECM8000, or any REW .cal file) or your device's built-in mic records it; on-device math extracts the impulse response and plots the curve. • Compare — overlay runs, each in its own color (twenty to choose from), to see exactly what a change did. Measure, adjust, measure again. TWO WAYS IN No audiophile experience required. Tune My Receiver runs a guided measurement, then hands back actual settings — "Bass +5, Treble +8" — instead of a chart to interpret. A plain-language results tour walks through what it found, and Balance Speakers checks your channels match before you start. Measure Again starts a new before-and-after round without losing the first. Prefer the full picture? Everything above is one tap away, from the same library. ALSO IN THE APP • Scrub any frequency — drag the cursor; it snaps to peaks and troughs and reads frequency · dB right where you need it. Pinch to zoom into any band; hold near the edge to pan. • Target curves — overlay Harman Room, B&K, a tilt, or Room Gain as a dashed reference so you know what "good" looks like, not just what you measured. • Aim at what you listen to — pick a listening style (Bass-forward, Warm, Bright, and more) and Tune My Receiver's recommendation steers toward it, not just flat. • Average or Difference — power-average two or more captures (walk the room, average the seats) or compute A − B to see exactly what a change did, both as new measurements you can keep comparing. • Real smoothing, applied after the fact — every capture keeps its full resolution; change 1/24 to 1/3-octave anytime and every trace redraws, no re-measuring. • Set levels with confidence — a built-in test tone and live meter get your output where it should be, and the sweep then plays at exactly that level. Each measurement mic keeps its own calibration file and trim, matched automatically when you plug it in. • Share your capture — export the chart as a labeled image card: color-coded traces, an optional cursor callout, one tap to send anywhere. From Tune My Receiver, the card carries your verdict and knob settings too. • Handoff to your Mac — pair once, and send a capture straight to Sweep for Mac's library: device to device, encrypted, no internet, no cable. Off by default; turn it on in Settings. • Open Sweep files — tap a .sweep file in Files, Mail or AirDrop to add its measurements to your library. HONEST BY DESIGN Sweep shows relative frequency response — the shape you need to tune speaker DSP and EQ. A time-gate isolates the direct sound; down low, the room is part of every measurement, so what you see there is speaker plus room, not the speaker alone — and wherever a reading can’t be fully trusted, low or high, the line turns dashed. Results are only as calibrated as the mic file you import; levels without a known mic sensitivity are marked ≈. Not an SPL meter, not a full bench replacement — it names its limits up front, so you can trust its strengths. PRIVATE BY DEFAULT Everything runs on your device. No account, no signup, no cloud, no tracking, no analytics SDK. Your measurements are processed entirely on your device. They go only where you send them — a paired Mac in the same room, or a file you share. Free. No in-app purchases, no account. Sweep is part of a family of focused instruments alongside Pull, Grip, Lean, and Level.

About

Remote97

Control your smart home theater devices directly from your phone over your local network. This app offers a pure software solution, eliminating the need for extra hardware hubs. It automatically discovers compatible devices like AV receivers and smart TVs for seamless control.

Highlights
  • Pure software solution, no extra hardware
  • Automatic device discovery on LAN
  • Real-time status synchronization
  • Control AV receivers and smart TVs
  • Local network communication only
  • No account or cloud servers required
Features
Read full description

Remote97 turns your phone or tablet into a powerful universal remote for your entire home theater — no infrared (IR) blaster, no extra hardware, and no line-of-sight required. If a device is on your Wi-Fi, Remote97 can control it. ONE REMOTE FOR EVERYTHING Replace the drawer of lost remotes with a single, beautifully designed app. Control your AV receiver, TV, streaming box, projector and sound system from one place. AUTOMATIC DISCOVERY Remote97 finds compatible devices on your local network automatically. Tap to add — no manual setup needed in most cases. BUILD YOUR OWN REMOTE Design a remote that fits your setup. Arrange controls exactly how you like: the signature volume combo-ring, directional pads, buttons, sliders and toggles. Resize and reposition freely on a flexible canvas. CINEMATIC THEMES Make it yours with six carefully crafted themes, each with light and dark variants and customizable wallpapers. SCENES & AUTOMATION Group devices into scenes and trigger them with a tap. Switch the input, set the volume and power everything on at once. REAL-TIME STATUS See live device status at a glance: current input, volume, sound mode and playback state update in real time. WORKS WITH Denon, Marantz, Yamaha, Sony, Samsung, Xiaomi, Apple TV, Roku, LG, Sonos, Bluesound, WiiM, Arylic, Zidoo and more — 15+ brands and growing. GET STARTED FREE Download free and start controlling your devices today. An optional Pro upgrade unlocks advanced customization and automation.

Screenshots

Sweep4 screens
Remote974 screens

Verdict

The call

The clearest difference is review sentiment: Remote97 at 100% against Sweep's 0%. Remote97 also leads on rating (5.0 vs 4.0) and iOS requirement (15.0 vs 17.0). Sweep's advantage is update cadence (weekly vs every 4 months). On price, ratings volume, ads and in-app purchases there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. Neither carries in-app purchases, so what you see is what you pay.

ReceptionRating · Positive reviews · Number of ratings

Remote97 holds the better App Store score, 5.0 against 4.0. Both are backed by a comparable volume of ratings — 2 and 1 respectively. Written reviews point the same way: 0% of Sweep's written reviews are positive against 100% of Remote97's.

UpkeepUpdate frequency

Sweep ships an update weekly, Remote97 every 4 months. The most recent releases landed on October 31, 2026 and November 18, 2026 respectively.

Scorecard4 real differences · 6 level
Sweep versus Remote97: the parameters behind the verdict, then further details
ParameterSweepRemote97
PriceFreeFree
Rating4.0 (2 ratings)5.0 (1 ratings) — better
Positive reviews0.0% of reviews100.0% of reviews — better
Number of ratings2 — better1
Update frequencyWeekly — betterEvery 4 months
AdsNoNo
In-app purchasesNoNo
MonetizationFreeFree
DevicesiPhone, iPadiPhone, iPad, iPod — better
Requires iOS17.015.0 — better
Further details — not scored
Size4 MB57 MB
Age rating4+4+
DeveloperCarl Sieber渊 林

Customer experience

Sweep

All ratings2 ratings
Positive50.0%
Neutral50.0%
Negative0.0%
Written reviews1 reviews
Positive0.0%
Neutral100.0%
Negative0.0%

Remote97

All ratings1 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews1 reviews
Positive100.0%
Neutral0.0%
Negative0.0%

In-app purchases

None

Sweep

No in-app purchases

None

Remote97

No in-app purchases

Questions

Is Sweep free?
Sweep is free to download, with no in-app purchases.
Is Remote97 free?
Remote97 is free to download, with no in-app purchases.
Which has better reviews, Sweep or Remote97?
Remote97 is rated higher. Sweep averages 4.0 out of 5 from 2 ratings, while Remote97 averages 5.0 from 1 ratings.
Do Sweep or Remote97 have ads?
Neither Sweep nor Remote97 shows ads.
Which is updated more often, Sweep or Remote97?
Sweep ships an update weekly, and Remote97 every 4 months. Most recently, Sweep was updated on October 31, 2026 and Remote97 on November 18, 2026.

Other comparisons