Comparison

PrivacyScan vs Bug Detector

Price, ratings, monetisation and update history for both apps, side by side โ€” with what reviewers say about each.

Head to head
About

PrivacyScan

Features
Read full description

Check a hotel room, a vacation rental or a flat you are about to move into for devices that should not be there, and see in plain words what this app can and cannot find. EVERY SCAN IS FREE No account, no trial, no scan limit. You see every result without paying. The optional Pro upgrade only removes ads and lifts the limit on PDF exports. WHAT IT ACTUALLY DOES - Lists every device advertising a service on the Wi-Fi you are connected to, with its name, its IP address and the services it offers - Scores each one on how much it looks like an IP camera (RTSP, ONVIF, NVR and camera-style names) - Lists Bluetooth Low Energy devices nearby with signal strength and an estimated distance, and flags names used by cameras and recorders - Walks you through a room inspection: 29 checkpoints in 5 groups โ€” smoke detectors, sockets, USB chargers, alarm clocks, picture frames, vents - Turns on the torch with a live camera preview so you can sweep surfaces for the small bright dot a lens reflects - Saves each scan as a report with a place name. Scan the same place again and the devices that were not there last time are marked NEW - Exports a report as a PDF to keep or send (the first PDF is free) WHAT IT CANNOT DO, STATED PLAINLY An iPhone has no radio receiver for RF sweeping. Apps that animate a radar dial and call it RF detection are showing you an animation. This one does not. It cannot find a camera that records to a local card and never touches the network. It cannot find one on a different Wi-Fi network, or on a router with client isolation switched on. The torch sweep is you looking at a screen: it is a manual aid, not a detector, and it does not see infrared. A high camera score is not a camera. It means that device advertises services cameras commonly use โ€” a network video recorder and a doorbell look alike from the outside. The number is a reason to walk over and look. COMMON QUESTIONS Can an iPhone detect a hidden camera? Not by itself. It can find devices that announce themselves on the network or over Bluetooth, and it can help you look. Anything offline you find with your eyes. Does it detect RF signals? No, and nothing on an iPhone can. There is no RF receiver in the phone that an app can reach. Does the infrared test work? The app shows the back camera's live view so you can check a remote control emits IR and then sweep the room. Most iPhone cameras filter out 940 nm, the wavelength most covert cameras use, so a clean result proves nothing. Does it need an account or internet? Neither. Scanning is local, nothing is uploaded, there is no sign-up. What does Pro add? It removes ads and the upgrade screen after a scan, and unlocks unlimited PDF exports. Scanning, the device list and saved reports are free. What language is it in? It follows your iPhone; the interface is translated into 34 languages. FOR Hotel rooms, short-term rentals, changing rooms, offices, shared flats, and anyone who wants to check rather than assume. Terms of Use: https://ghapps1.wordpress.com/terms-condition/ Privacy Policy: https://ghapps1.wordpress.com/privacy-policy/

About

Bug Detector

Features
Read full description

Stakeout is a listening stakeout. You put the phone down, walk away, and come back to a timestamped tape of the steady tones it heard in the near-ultrasonic band โ€” the range above ordinary hearing that a phone microphone can still sample. WHAT IT ACTUALLY DOES There is no live spectrum in this app. No waterfall, no decibel meter, no needle to watch. That is deliberate. A meter tells you about the instant you happen to be looking at it; a tape tells you what happened while you were not in the room. The running screen is a session clock and a log, and the output is evidence with timestamps. TEST YOUR OWN PHONE FIRST Before a session, run the self-test. Stakeout plays 16, 18, 20 and 21 kHz through the speaker, measures what your microphone returns, and prints the measured response for each one. Not a spec sheet copied from somewhere โ€” your handset, in your room, at your volume. Microphone response above 20 kHz varies enormously between phones, so the honest thing is to measure it and show you, rather than promise a flat response nobody can guarantee. THE TAPE Every row is one event: the wall-clock time it started, the frequency, how long it held, and how far above the room's own noise it sat. Times are zero-padded and absolute โ€” never "3 minutes ago" โ€” because a log you might act on needs real timestamps. Tones that stop and restart are folded into one row with a count, so a pulsing source reads as one finding rather than forty. A tone has to hold for at least two seconds to be logged at all. That single rule removes almost everything a room throws at a microphone: a chair scraping, a door, a cough, a passing car. THE UNVERIFIED BAND The region above 20 kHz is drawn differently and labelled unverified, because that is the truth: it sits where phone microphones start to roll off and where your particular handset may hear nothing at all. The self-test is what tells you which side of that line you are on. WHAT YOU GET FREE - The full near-ultrasonic detector, 15 to 22 kHz - Sessions up to 15 minutes - Three saved tapes - The loopback self-test, unlimited - Steady tones in the audible band logged as events WHAT PRO ADDS - Sessions with no time limit, running all night - Every tape kept, not only your last three - Export a tape as plain text, timestamps and all - Detection strictness: loose, standard or strict BEING HONEST ABOUT THE LIMITS A phone cannot scan the radio spectrum. It cannot detect an analogue transmitter, and it cannot find a wired or fully passive microphone โ€” those things emit nothing a microphone can hear. Any app claiming otherwise is selling you a feeling. What a phone can do is listen very carefully, in a band you cannot. A tone in your tape is something worth explaining. It is not, on its own, proof of surveillance โ€” ultrasonic tones also come from motion sensors, some televisions, rodent repellers, cleaning equipment and a surprising number of ordinary appliances. The app gives you the evidence and the timestamps; the conclusion is yours. PRIVACY No account, no sign-up, no analytics and no tracking. Audio is analysed live on the device and is never recorded, saved or uploaded โ€” the tape holds numbers, not sound. The only connection the app makes is the subscription check with the App Store. SUBSCRIPTION Stakeout Pro is $3.99 per week with a 3-day free trial, or $17.99 per year. Payment is charged to your Apple ID at confirmation of purchase. Subscriptions renew automatically unless auto-renew is turned off at least 24 hours before the end of the current period. Your account is charged for renewal within 24 hours before the end of the current period. You can manage and cancel your subscription in your App Store account settings. Any unused portion of a free trial is forfeited when you buy a subscription. Privacy Policy: https://leomarston.github.io/manycode-legal/privacy.html Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Screenshots

PrivacyScan4 screens
Bug Detector4 screens

Verdict

The call

The clearest difference is ads: Bug Detector at none against PrivacyScan's shown. On price, in-app purchases, device support and iOS requirement there is nothing between them.

Scored on Price ยท Rating ยท Positive reviews ยท Number of ratings ยท Update frequency ยท Ads ยท In-app purchases ยท Monetization ยท Best chart rank ยท Devices ยท Requires iOS

CostPrice ยท In-app purchases ยท Ads ยท Monetization

Both are free to download. PrivacyScan sells 3 in-app purchases, starting at $2.99 per 7 days and Bug Detector sells 2 in-app purchases, starting at $3.99 per 7 days. Whichever you choose, the download price is not the number that matters.

Scorecard1 real difference ยท 5 level
PrivacyScan versus Bug Detector: the parameters behind the verdict, then further details
ParameterPrivacyScanBug Detector
PriceFreeFree
Update frequencyEvery 3 weeksโ€”
AdsYesNo โ€” better
In-app purchasesYesYes
DevicesiPhone, iPad โ€” betteriPhone
Requires iOS17.017.0
Further details โ€” not scored
Size5 MB15 MB
Age rating4+4+
DeveloperGrima HdezEmine Saridogan

In-app purchases

3 purchases

PrivacyScan

Subscriptions2
  • PrivacyScan Pro Weekly$2.997 Days
  • PrivacyScan Pro Yearly$29.991 Year
One-time1
  • PrivacyScan Pro Lifetime$49.99
2 purchases

Bug Detector

Subscriptions2
  • Weekly3 Days trial$3.997 Days
  • Yearly$17.991 Year

Questions

Is PrivacyScan free?
PrivacyScan is free to download, with in-app purchases available.
Is Bug Detector free?
Bug Detector is free to download, with in-app purchases available.
Do PrivacyScan or Bug Detector have ads?
PrivacyScan shows ads; Bug Detector does not.

Other comparisons