Comparison

BimmerObd vs BimmerInspect

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

BimmerObd

Transform your phone into a car diagnostic tool with a compatible OBD-II adapter. Read trouble codes, view live sensor data, and access an offline library for code explanations. Perform service resets and generate PDF reports for your vehicle's records.

Highlights
  • Read and clear trouble codes
  • Offline code library with explanations
  • Live sensor data display
  • Battery health monitoring
  • Readiness and freeze frame data
  • Service resets and guides
  • PDF report generation
  • Multi-vehicle garage
Features
Read full description

Turn your phone into a capable car diagnostic tool. Connect a standard, compatible Wi-Fi OBD-II adapter and read what your vehicle's computer is really reporting — trouble codes, live sensor data, readiness monitors and more. WHAT YOU CAN DO - Read and clear trouble codes. Scan the engine and other control modules for current, pending and permanent diagnostic trouble codes, then clear them after a repair. - Understand every code. A built-in offline library explains what each code means, its likely causes, common symptoms, suggested fixes and a typical repair cost range. No internet connection needed. - Watch live data. Real-time engine speed, vehicle speed, coolant and intake temperature, engine load, throttle position, fuel trims, airflow, timing and more on smooth custom gauges and charts. - Check battery health. Follow charging voltage with clear resting, cranking and charging readouts. - Readiness and freeze frame. See which emissions monitors are ready before an inspection, and view the sensor snapshot captured when a fault was set. - Service resets and guides. Step-by-step guidance for common maintenance procedures. - Reports. Save any scan and export a clean PDF to share with a workshop or keep for your records. - Garage. Store several vehicles and switch between them in a tap. - Knowledge base. Plain-language articles that explain codes, monitors and how the whole system works. COMPATIBILITY Works with most vehicles that support the OBD-II standard — generally cars and light trucks sold from 1996 onward in North America, and from 2001 (petrol) or 2004 (diesel) onward in Europe. Real-time features require a compatible Wi-Fi OBD-II adapter, sold separately by third parties. Demo Mode needs no hardware at all. PRIVATE BY DESIGN Everything runs on your device. No accounts, no sign-ups, no ads and no tracking. Your vehicle data, code lookups and reports stay on your phone. A NOTE This is an independent product and is not affiliated with, endorsed by or associated with any vehicle manufacturer or adapter maker. Diagnostic information is provided for guidance only — always confirm any repair with a qualified technician. Subscription Information: . Payment will be charged to your Apple ID upon purchase confirmation. . Subscriptions automatically renew unless canceled at least 24 hours before the current period ends. . Renewal charges occur within 24 hours before the current period ends. . Manage or cancel subscriptions in your App Store account settings. . If a free trial is offered, unused portions will be forfeited upon subscription purchase. Privacy Policy: https://doc-hosting.flycricket.io/lntm-s-privacy-policy/4d4e0876-516c-428c-b630-4e9ccd29f174/privacy Terms & Conditions: https://doc-hosting.flycricket.io/lntm-s-terms-conditions/635273cf-17ef-4330-ba8b-00940c49d9eb/terms

About

BimmerInspect

Read full description

BimmerInspect is an independent vehicle inspection app that works only with selected supported vehicles. Before you buy an adapter, check which cars are supported in the FAQ at bimmerinspect.app. Get a clearer picture of a used car before purchase—or better understand a vehicle you already own. BimmerInspect connects to supported vehicle systems through a compatible OBD adapter and turns available manufacturer-specific diagnostic data into a guided inspection and a clear report. WHAT IT CAN CHECK Depending on the vehicle and the systems that respond, BimmerInspect can inspect up to seven areas: • Vehicle identity — compares VIN and build information reported by available vehicle systems • Mileage — compares the dashboard reading with mileage available in other control units • Faults — reads stored fault codes and provides available names and descriptions • Engine — reviews available misfire, variable valve timing, fuel-trim and related data • Gearbox — examines available transmission adaptation and temperature history • High-voltage battery — reviews available capacity, consistency and cell-balance data on supported vehicles equipped with a high-voltage battery • Usage — summarizes available driving patterns, loads and operating-temperature history Only inspection areas supported by the vehicle’s responding systems are shown. Coverage varies by model, platform, powertrain, trim and installed control units. HOW IT WORKS 1. Connect a compatible adapter to the vehicle’s OBD-II port. 2. Let BimmerInspect identify the vehicle and available systems. 3. Run the guided inspection while the vehicle is safely parked. 4. Review the summary and explore the detailed results for each available area. Most inspections take approximately ten minutes; allow up to fifteen. INSPECT FIRST, THEN DECIDE Running an inspection is free, and you can see what was successfully checked before deciding whether to purchase the complete report. Unlocking is a one-time payment per report—there is no subscription. An unlocked report includes the complete findings and a PDF that you can save or share. No adapter yet? Open the sample report from the Vehicle tab to see what an inspection report looks like. VEHICLES AND ADAPTERS BimmerInspect supports selected vehicles from approximately model year 2011 onward; other vehicles are not supported. Available inspection areas depend on the compatible data provided by each vehicle. The app works with supported ENET adapters and Bluetooth Low Energy or Wi-Fi ELM327-class adapters. A standard 16-pin OBD-II port is required. BimmerInspect is an independent inspection tool. It does not replace a professional vehicle inspection, diagnosis, maintenance or repair advice. BimmerInspect is not affiliated with or endorsed by any vehicle manufacturer.

Screenshots

BimmerObd4 screens
BimmerInspect4 screens

Verdict

The call

BimmerObd and BimmerInspect are too close to call on the numbers: across 5 compared parameters — price, ads, in-app purchases and device support among them — neither pulls far enough ahead to decide it. What separates them is feature set and interface, not measurable difference.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. BimmerObd sells 3 in-app purchases, starting at $8.99 per 7 days and BimmerInspect sells 1 one-off in-app purchase. Whichever you choose, the download price is not the number that matters.

ScorecardNo meaningful differences
BimmerObd versus BimmerInspect: the parameters behind the verdict, then further details
ParameterBimmerObdBimmerInspect
PriceFreeFree
Rating5.0 (1 ratings) — better—
Number of ratings1 — better—
Update frequencyEvery 2 days—
AdsNoNo
In-app purchasesYesYes
MonetizationFree with in-app purchases—
DevicesiPhone, iPadiPhone, iPad
Requires iOS17.016.0 — better
Further details — not scored
Size5 MB50 MB
Age rating4+4+
DeveloperNguyen Tra My LeSergiu Stirbet

In-app purchases

3 purchases

BimmerObd

Subscriptions3
  • Premium Membership Weekly$8.997 Days
  • Premium Membership Monthly3 Days trial$19.991 Month
  • Premium Membership Yearly$49.991 Year
1 purchases

BimmerInspect

One-time1
  • Full Inspection Report$12.99

Questions

Is BimmerObd free?
BimmerObd is free to download, with in-app purchases available.
Is BimmerInspect free?
BimmerInspect is free to download, with in-app purchases available.
Do BimmerObd or BimmerInspect have ads?
Neither BimmerObd nor BimmerInspect shows ads.

Other comparisons