OneFocus vs Layuptrace
Price, ratings, monetisation and update history for both apps, side by side β with what reviewers say about each.
OneFocus
Read full descriptionHide full description
OneFocus turns a focus plan into one clear session across iPhone, iPad, and Mac. Choose a Focus Profile, set a duration, and see whether each device is protectedβwithout a vague all-green status hiding a problem. FOCUS YOUR WAY β’ Start 25, 50, or 90-minute sessions, or choose a custom duration. β’ Build Profiles for Deep Work, Study, Reading, and your own routines. β’ Block selected apps and websites on iPhone and iPad with Apple's Screen Time controls. β’ Use the free Mac companion to protect supported apps and websites. β’ Keep a session going with local rain, cafΓ©, train, forest, wave, and other procedural sounds. ONE SESSION, HONEST STATUS Private iCloud sync carries your active session, Profiles, schedules, history, and verified Pro status between devices. OneFocus shows iPhone Protected, Mac Protected, Waiting, Needs Permission, or Offline separately, so you know what is actually happening. Existing local sessions and history remain useful offline. HISTORY THAT EXPLAINS YOUR TIME Review Today, 7 Days, Month, and All Time. See pause-aware totals, streaks, Profile distribution, a calendar heatmap, Focus Constellation, and per-device protection intervals. Session details preserve the Profile used at the time, even if you later rename it. APPLE WORKFLOWS Use App Shortcuts for quick 25 or 50-minute starts, open History, and coordinate OneFocus with an Apple Focus through a guided Shortcut. Core actions support VoiceOver, larger text, reduced motion, and keyboard navigation. FREE AND PRO The free version includes manual sessions, one custom Profile, four sounds, a daily goal, basic iPhone/Mac connection, Flexible mode, and recent history. A single US$9.99 Pro Lifetime purchase unlocks unlimited Profiles, repeating schedules, full history, all sounds, skies, and themes, Committed mode, advanced Shortcuts, and data export. Restore purchases at any time. PRIVATE BY DESIGN No OneFocus account. No ads. No third-party tracking. Browser content and Screen Time selections are not uploaded. Sync uses your private iCloud database, and sounds are generated locally. Terms of Use: https://oneapps.studio/terms
Layuptrace
Read full descriptionHide full description
Lay out the schedule, then bag it. Layuptrace walks each composite part through five stages on one board: Plan, Layup, Bag, Cure and Inspect. Drag a card from column to column as the part moves across the shop, and open it to work the stage it is in. Plan the laminate in a ply table. Add rows, pick the orientation from 0, 45, β45 and 90 or dial in any angle, and choose the fabric: carbon UD 150, 3K twill 200, E-glass plain 200, biaxial Β±45, S-glass, aramid, or your own areal weight. Type a stacking sequence such as [0/Β±45/90]s and the table fills itself. Set the resin content you expect from your process and read the results as you edit: cured thickness per ply and for the stack, fibre volume fraction, dry fibre mass, resin absorbed, cured part mass for the laminate area, and how much epoxy, vinyl ester or polyester to mix, split into part A and part B by the system's ratio. The stack is checked for symmetry and balance while you type. Unpaired +45 plies, mirror plies that do not match and long runs of one angle are named in plain words so you fix them before you cut fabric. Lay up against the clock. Mix a batch, start the pot-life timer, and check off each ply as it goes into the mold. Bag it and prove it. Work the bagging checklist from peel ply to pump, then run the leak-down test: record the gauge at t0, let the hold timer run with the pump isolated, record the gauge again and read the verdict. Read the gauge in inHg, mbar or kPa, and set the rule to match your shop: minimum vacuum, allowed drop and hold time, shown in the unit you chose. Cure by the stages. Load a room-temperature cure, a 60 Β°C post-cure or an oven ramp, or write your own stages with a target temperature and time. Start each stage, watch elapsed and remaining, log the thermometer reading, complete it and step to the next. Inspect and conclude. Log dry spots, voids, bridging, wrinkles, pinholes, delamination and resin-rich areas with location, size and severity. Choose accept, rework or scrap, write the conclusion and sign it with a timestamp. Every part, ply, reading and timestamp is kept in a notebook file inside the app and is there when you come back. Four worked examples are included, so you can see a checked ply table, a leak-down waiting on its hold reading, a live cure and an inspection with its rework conclusion drafted and ready to sign, before you add your first mold.
Screenshots
Verdict
The clearest difference is price: OneFocus at Free against Layuptrace's $0.99. Layuptrace's advantage is in-app purchases (none vs 1). On ads, device support and iOS requirement there is nothing between them.
Scored on Price Β· Rating Β· Positive reviews Β· Number of ratings Β· Update frequency Β· Ads Β· In-app purchases Β· Monetization Β· Best chart rank Β· Devices Β· Requires iOS
OneFocus is free to download; Layuptrace costs $0.99 up front. OneFocus sells 1 one-off in-app purchase. Layuptrace asks for nothing beyond the download.
| Parameter | OneFocus | Layuptrace |
|---|---|---|
| Price | Free β better | $0.99 |
| Update frequency | Every 2 months | β |
| Ads | No | No |
| In-app purchases | Yes | No β better |
| Devices | iPhone, iPad, Mac β better | iPhone, iPad |
| Requires iOS | 17.0 | 17.0 |
| Further details β not scored | ||
| Size | 33 MB | 4 MB |
| Age rating | 4+ | 4+ |
| Developer | Freedom Dimension (shenzhen) Technology Co., Ltd | Robert Corbin |
In-app purchases
OneFocus
- OneFocus Pro Lifetime$9.99
Layuptrace
No in-app purchases









