Rika vs Snap Remote

With just two phones, one becomes the camera and the other becomes the remote. Rika is a remote camera app: mount one phone, then watch its live view and shoot from the other. No more asking strangers, no more running back and forth to check the framing. Take couple photos with both of you in them, and group shots where nobody is left out. ■ How it works 1. Open the app on both phones and pick a role — one is the camera, one is the remote 2. Scan the QR code on the camera phone with the remote phone to connect instantly 3. Set the camera phone on a tripod or shelf, then shoot while watching the live view ■ Features · Remote viewfinder — frame your shot while watching the mounted phone's live view · Full remote control — shutter, timer (3/5/10s), zoom, brightness, lens switch, and flash · Instant pairing — no sign-up, just one QR scan. Works even on LTE, not only on the same Wi-Fi · Aspect ratios — 3:4 / 9:16 / 1:1 / Full, saved exactly as you see them · In-app album — photos are sent to the remote phone automatically; save only the ones you love to both phones ■ Privacy first · Videos and photos are never stored on a server — they travel encrypted, directly between your two phones · The screen is shared only while connected via QR; once disconnected, nothing can be viewed or controlled · No sign-up, no account ■ Perfect for · Couple photos on your trips · Family and group shots where the photographer is never missing Contact: kyi910705@gmail.com

Snap Remote turns your iPhone into a wireless remote for cameras that speak the classic Camera Remote API over Wi-Fi. Live view, shutter release, video recording, every setting the camera actually allows, and an interval mode built for the real timing of a camera. No cable, no account, no cloud. SEE WHAT THE CAMERA SEES The live image comes straight from the camera, including the focus and face frames it reports. Fire from the screen or with the volume buttons, which is what you want when the phone is clamped to a tripod leg. After each shot the preview lands in the corner and one tap saves it to your photo library. Video recording works the same way. ONLY THE CONTROLS THAT REALLY EXIST Aperture, shutter speed, ISO, exposure compensation, white balance, focus mode: the list is built from what the camera permits at that moment. With the mode dial on Intelligent Auto the exposure values are locked, and the app shows them anyway, with a lock icon and a note on what to change. That is more honest than making them disappear. WHAT YOUR CAMERA CAN DO, IN BLACK AND WHITE The range of the Camera Remote API does not depend on the camera model but on the version of the Smart Remote Control app installed on the camera. On the factory version the exposure values are read-only; with the old PlayMemories upgrade they are fully controllable, and that store closed in 2021. So Snap Remote hard-codes no value lists at all. On connect it asks the camera what it implements and builds the interface from the answer. A parameter your camera reports but cannot set appears visible and locked; one it does not know at all does not appear. The Camera Info tab shows you the result: version, API reach and every single function your camera reported. A TIME-LAPSE THAT LISTENS TO THE CAMERA Depending on the subject, a shutter release takes one to three seconds until autofocus, exposure and preview are through. A rigid timer stacks up requests in that window until the camera gives up. Snap Remote waits for the answer instead, subtracts the time spent from the interval and sleeps only the remainder. If a frame takes longer than the interval, the sequence runs as fast as the camera can and the app tells you so. For a time-lapse through the blue hour that is the difference between a sequence and an error message. HONEST ABOUT THE LIMITS No internet needed, and none available: the camera runs its own Wi-Fi and is the router inside it, so iOS will report "No Internet" while you are connected. That is correct. The app keeps the screen awake during intervals and video instead of faking a background mode that iOS would not honour. Intervals below two seconds get unreliable, which is a limit of the camera API, not of the app. There is no access to the memory card: what gets transferred is the preview image the camera offers after each shot, at full JPEG resolution on an upgraded camera. RAW stays on the card. And the camera allows exactly one live view connection, so a second app streaming from it will cut one of you off. COMPATIBLE CAMERAS Any model with the classic Camera Remote API, meaning the ones that run the Smart Remote Control app on the camera. Among others: a7, a7 II, a7R, a7R II, a7S, a7S II, a5000, a5100, a6000, a6300, a6500; RX100 II to RX100 V, the RX10 series, RX0; HX90, WX500; and the FDR-X1000V, FDR-X3000, HDR-AS50 and HDR-AS300 action cameras. Not compatible: a7 III and newer, a9, a1, a7C and the ZV series. Those speak the newer Camera Remote SDK over USB and other protocols, not the Wi-Fi interface Snap Remote is built on. Please check your model against the list above before buying into the idea. NO ACCOUNT, NO TRACKING Snap Remote talks to your camera and to nothing else. There is no account, no server and no analytics.