Bhiu vs DNXT

Bhiu is a calm, independent app for your own OpenWrt router. See your network's pulse at a glance, then act on it — without opening a browser or remembering a single command. Bhiu talks only to the router address you enter, and to nothing else. There is no account, no analytics, and no Igney server in between. PULSE A live traffic wave and one plain sentence telling you how the network is doing. Download and upload as they happen, uptime, memory, WAN address, and the full routing table when you want the detail. DEVICES Everything on your network in one list, with names, addresses, signal strength and how long each has been connected. Tap any device for the full picture — and pause its internet access with one button when you need to. WI-FI Every radio and SSID your router exposes, with the clients on each. Turn a guest network off for the evening and back on in the morning. CONTROL Restart a service, wake a sleeping machine over the network, or reboot the router and watch it come back on its own. BUILT FOR THE JOB - Save more than one router and switch between them from Settings. - Connects over HTTP or HTTPS, with certificate pinning for routers using a self-signed certificate. - Degrades gracefully: router firmwares differ in what they expose, so a feature yours does not offer dims instead of breaking the app. - No third-party frameworks of any kind — Apple's system frameworks only. NO ROUTER HANDY? Tap "Try the demo" on the welcome screen and explore every feature against a fully simulated router: live traffic, the device list, pausing a device, Wi-Fi toggles, service restarts, Wake-on-LAN, and a complete reboot cycle. REQUIREMENTS An OpenWrt router with LuCI installed (ubus and rpcd reachable over HTTP or HTTPS) and its administrator password. Wake-on-LAN additionally needs the etherwake package on the router. Tested against OpenWrt 21.02 — other versions with LuCI installed are expected to work. Bhiu is an independent app and is not affiliated with or endorsed by the OpenWrt project.

Manage your DNXT router or USB modem from your iPhone or iPad. Connect to its Wi-Fi network to view connection status, change supported settings and troubleshoot internet access. COMPATIBLE HARDWARE DNXT CPE906 and ED126 routers, and the DNXT U7-E8 USB modem. A compatible device is required and sold separately. Available features depend on the model and firmware; the app is not intended for other router brands. WHAT YOU CAN DO • View connection status, signal information and mobile network details. • Change the Wi-Fi name and password and view connected devices. • Configure APN and other network settings supported by your device. • Run internet connectivity checks with step-by-step guidance. • Read messages on the router's SIM card where supported. • Open DNXT setup guides and support contacts. GET STARTED 1. Power on the router or connect the USB modem to a USB power source. 2. Join the device's Wi-Fi network in your iPhone or iPad settings. 3. Open DNXT and allow local network access. 4. Enter the router's administrator password when prompted. No separate DNXT account is needed. The app communicates with the router over the local network. Internet checks and external support resources require an internet connection. Internet service requires a compatible SIM and plan, or another internet source supported by the router. DNXT does not include mobile service or a VPN subscription. SIM and tariff compatibility depend on the hardware and operator. Interface languages: English and Russian. Support: https://dnxt-official.ru/support Email: info@dnxt-official.ru