Vonode vs Tap Counter · Baro

Vonode turns the Vonode node you run on your own server into a phone app for your numbers. Read and send texts, make and answer calls over cellular or Wi-Fi Calling, manage eSIM profiles and check line health for the SIM and eSIM lines in your own modems. WHAT YOU NEED Vonode is a companion app. It requires a Vonode node that you install and run yourself (Linux, with systemd or Docker), a compatible cellular modem, and your own SIM or eSIM with service from your carrier. Vonode does not provide hosting, mobile service, SIM plans, hardware or carrier access; these are the user's responsibility. MESSAGES • One inbox for every number on your node • Sender rules move unwanted texts to Filtered and show why • Verification codes stay in your inbox even when a sender rule matches (node software v1.4.2 or later) • Optional notifications with encrypted message previews CALLS • Phone-style keypad with contact suggestions, Recents and quick call back • Calls over cellular, or over Wi-Fi Calling where your carrier and modem support it • Always-allow and always-block lists, and a Blocked list that shows why NUMBERS AND eSIM • Signal, network, data and readiness for every line at a glance • Switch, enable, disable and remove eSIM profiles on supported eUICC cards in your modem • Keep-alive estimates for prepaid numbers, with reminders before the date • A line check that explains SIM, network, data, SMS and calling status in plain language ALSO • Wi-Fi Calling connection steps and network-path guidance (node software v1.4.2 or later) • Your own plan, balance and renewal notes in Card ledger (node software v1.4.3 or later) • Several nodes, USSD, device controls and the automations configured on your node • Contact names are matched on your device only, and only if you turn them on • Encrypted App Backup to move your settings and paired nodes to a new iPhone • English, Simplified Chinese, Traditional Chinese, Japanese and Korean • Node credentials are kept in the iOS Keychain IN-APP PURCHASE Without Vonode Lifetime, you can choose one number on one node and read in the app the SMS it receives over the cellular network, and, with node software v1.4.2 or later, over Wi-Fi Calling. With node software v1.4.2 or later, you can also use Filtered, mark messages as spam or not spam, and set sender rules for that number. Node management (paired phones, administrator password, backups and updates) is also included. Outside an active trial, access to calls, sending messages, notifications, eSIM, automation, diagnostics and more numbers requires Vonode Lifetime, a one-time In-App Purchase available in the app. Vonode Lifetime unlocks one node with every feature for as long as VONODE LLC offers the Vonode services and does not renew. 7-DAY TRIAL Eligible users with node software v1.4.3 or later can obtain a free 7-day Trial, a non-consumable In-App Purchase. It unlocks one node for 7 days (168 hours) from the original App Store purchase time, even if activated later. One trial per Apple Account, node and app installation; eligibility is checked. Restoring purchases or reinstalling does not restart it, and it cannot move to another node. It does not renew or turn into a payment. At its end, calls, sending, notifications and other unlocked features stop. Your data is kept; one-number SMS access depends on this phone's free-plan slot being available. The trial needs an online node and relay; offline time is not added. You may buy Vonode Lifetime separately at the price shown in the app. Vonode is not an emergency communications service. Availability depends on your hardware, node, network and carrier. Terms of Use: https://vonode.cc/terms/ Privacy Policy: https://vonode.cc/privacy/ With node 1.4.5+, restricted actions require three lawful-use confirmations. You may decline and stay read-only; older nodes remain available for reading, maintenance and upgrade. Report misuse: support@vonode.cc.

■ Count taps. Then see the rhythm. Tap anywhere on the big mechanical counter and the wheels roll over — no menus, no setup, no waiting. When you finish, Tap Counter does what a handheld clicker never could: it draws the rhythm of your count, a graph of the gap between every single tap. Where you sped up, where you slowed down, where you stopped — it is all there, measured on your own device. Nothing is uploaded, and nothing needs an account. ------------------------------- ● The click-rhythm graph (the reason this app exists) ------------------------------- Every tap is timestamped locally, so finishing a count gives you far more than a number: • A line of the gap between each tap, drawn left to right in the order you counted. • A dashed median line, so you can see instantly which stretches ran above or below your usual pace. • Rings on the quickest and slowest points, plus a plain sentence naming them — "Quickest around tap 12, slowest around tap 40." • Long pauses are held at the top of the scale and reported honestly, so one interruption never flattens the rest of the graph. • Elapsed time, taps per minute, fastest gap and slowest gap, side by side above it. • The line is drawn straight between real readings. No smoothing, no invented curve — only gaps you actually tapped. ------------------------------- ● How it counts ------------------------------- 1) Tap anywhere The counting surface fills the screen. It registers on press rather than release, so fast counting keeps up with your thumb. 2) Feel every count A haptic click on each tap, and the odometer wheels turn like the real thing. 3) Undo, or reset Miscounted? Undo removes the last tap and its interval. Reset throws the whole count away — behind a confirmation, never by accident. 4) Name it, or don't Type a label at the top — "Boxes", "Rows", "Lap 3" — or leave it blank and count. 5) Finish and file it One tap ends the session and saves it to History with its stats and its graph. 6) History that stays put Your last 200 counts, newest first, with name, total, duration and date. Tap a row to reopen the full result and its graph. Deleting and clearing are each behind a confirmation. 7) Never loses your place The count in progress is written to disk as you tap. Take a call or switch apps — come back and your number is still there. ------------------------------- ● Private by design ------------------------------- • Zero network code. Nothing leaves this phone, ever — check it in airplane mode. • Every session is stored on this device only. • No account, no login, no sign-up. Privacy label: Data Not Collected. • Zero analytics. Zero telemetry. Zero third-party SDKs. • No ads. No subscriptions. No in-app purchases. ------------------------------- ● Built to be tapped ------------------------------- • Every control is at least 64 × 64 pt — easy to hit without looking. • High-contrast type on an AMOLED-friendly black background that sips battery. • Single taps only. No double-taps, no swipes, no hidden gestures. • The counter is labelled for VoiceOver, even though the digits are drawn rather than written. • Reduced Motion is respected — the graph simply appears, fully drawn. ------------------------------- ● Great for ------------------------------- • Inventory, stock takes and headcounts • Knitting rows and stitches • Laps, reps and sets • Prayer beads and repetitions • Anyone curious how steady their own pace really is ------------------------------- ● The Baro promise ------------------------------- Tap Counter is part of Baro — lightweight tools that respect your data, your battery, and your time. "The tools you reach for first."