OnsiteBIM vs Point Cloud & BIM Viewer
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
OnsiteBIM
Read full descriptionHide full description
See your BIM model where it belongs: on the jobsite. OnsiteBIM places 3D building models directly into the real world using your iPhone or iPad. Inspect, navigate, measure, and compare digital BIM designs against physical construction—from active floor plates and mechanical rooms to basements and remote jobsites. HOW IT WORKS — FROM OFFICE TO JOBSITE Open Your 3D Model Open BIM and CAD models directly from device storage, Apple Files, iCloud Drive, Google Drive, OneDrive, or Dropbox. Place Your Alignment Target Tape a printed Alignment Target to a known column, wall, or floor benchmark. Print-ready targets and Revit families are available at www.onsitebim.app. Aim Camera & Inspect at 1:1 Scale Point your camera at the target, and your 3D model locks into place at 1:1 scale. Alignment Targets are physical positioning anchors—not QR download links. POSITION YOUR MODEL YOUR WAY • Auto Target Alignment — Lock models into real-world space using an Alignment Target (position, elevation, orientation). • Manual Surface Placement — Position models on floor surfaces using joystick navigation, rotation controls, and elevation nudging. LOG FIELD ISSUES & GENERATE PDF REPORTS Document field findings and clashes directly in AR: • 1-Tap Issue Capture — Freeze viewport with stamped evidence badges, priority tags, and GPS geotagging. • BIM Element Metadata — Auto-links active IFC element details, GUIDs, specs, and measured tolerances. • On-Device PDF Reports — Generate executive 1-page PDF punch reports locally with zero internet access required. EXPORT TO REVIZTO, REVIT & AUTODESK ACC • buildingSMART BCF 2.1 — Export standardized .bcfzip packages with true 6-DoF AR camera viewpoints and component GUIDs for Revizto, Revit, and BIMcollab. • Autodesk Construction Cloud (ACC) — Export structured CSV issue logs formatted for direct import into ACC and BIM 360 Docs. SEE EXACTLY WHAT MATTERS Filter individual BIM layers or use MEP ONLY to hide architecture and isolate critical systems: • HVAC ductwork & equipment • Plumbing & piping • Fire suppression • Electrical conduits & cable trays • Structural steel, concrete & rebar WORK WITH MAJOR BIM & 3D FORMATS Open models without cloud conversion: • IFC — OpenBIM models (IFC 2x3 and IFC4) • GLB & glTF — 3D models with PBR materials • USDZ — Apple spatial 3D models • OBJ & STL — 3D geometry with selectable measurement units Compatible with Autodesk Revit, Navisworks, SolidWorks, Archicad, Rhino, and SketchUp. MIX DIGITAL MODELS WITH THE REAL WORLD • Real-Time LiDAR Occlusion — Physical walls, slabs, and columns naturally hide virtual geometry positioned behind them. • Interactive Transparency — Inspect digital building systems behind physical surfaces or inside forms. • Model Opacity Control — Adjust opacity from 0% to 100% to cross-reference virtual MEP runs against as-built conditions. MEASURE IN 3D Use the surface-aligned 3D tape measure to verify clearances and tolerances in metric and imperial units. 100% ON-DEVICE & PRIVATE • Work Offline — Inspect models in basements, mechanical rooms, tunnels, and remote sites without Wi-Fi or cellular signal. • Private by Design — Model geometry never leaves your device. BUILT FOR THE JOBSITE High-contrast outdoor HUD, large glove-friendly controls, 2D joystick, and thermal battery optimization. Free companion web tools at www.onsitebim.app
Point Cloud & BIM Viewer
Visualize and analyze 3D laser scans and BIM models directly on your device. Measure distances, compare designs to construction, and export results. All data remains local for enhanced privacy.
- Open E57, LAS, LAZ, PLY, IFC, USDZ, OBJ, STL, glTF, GLB formats
- Measure distances, dimensions, and areas
- Compare scan data against BIM models
- Create and export floor plans (IFC, DXF, SVG, PDF)
- View projects in Augmented Reality (AR)
- Georeference projects on a map
- Browse and inspect BIM model elements and properties
Read full descriptionHide full description
Point Cloud & BIM Viewer opens laser scans and BIM models on your Mac, iPad and iPhone — measure them, cut sections, see where the building differs from the design, and export the results. Everything stays on the device: no account, no upload. A sample project with a guide shows where everything is. FORMATS • E57 with registered scan setups, colour, intensity and spherical photographs • LAS and LAZ 1.0 to 1.4 with colour, intensity and classification, and COPC • PLY, PTS, PTX, and XYZ or TXT with intensity or RGB columns • IFC models, also zipped or gzipped; USDZ, USD, OBJ, STL, glTF and GLB • DXF plans under the scan, with layers to switch off • Several files, a folder or a zip as one project Import never modifies the original; a hundred million points take tens of megabytes. EVERYTHING IN ONE PROJECT The side panel lists the cloud and each of its scans, every model file, floor plan and saved cut. Show, hide, colour or look at each on its own; colour the scan setups to check the registration. Add scans later, send a project by AirDrop. THE SCAN AGAINST THE MODEL • Every point coloured by its distance to the model, with a tolerance you set • Which elements are built, which are missing, and where the scan never went • The elements built out of tolerance, listed • Place a model by pairs of corners, by the walls in the scan, by matching the floor plans, or where its georeference says • Measure from the scan to a surface of the model SCAN WITH LIDAR On an iPhone or iPad with LiDAR, scan a room into a project, fit it to the other scans, and continue later. For orientation, not millimetres. FLOOR PLAN RoomPlan draws the walls, doors and windows as you scan and divides the floor into rooms with their areas; walls found in any scan make a draft. Correct the plan, then export IFC, DXF, SVG or a PDF to scale. THE PROJECT IN AR On iPhone and iPad, stand the project on a table, or at 1:1 in the building by a few shared points, with a scan's panorama over the walls. ON THE MAP Coordinates as a surveyor writes them: S-JTSK Y and X, or E and N in the system the file or IFC georeference names. See the project on a map with an aerial view under the scan, or place it by hand; exports keep its place. The map loads from Apple Maps only when switched on. THE MODEL Browse elements by storey, class or file; find them by name, GlobalId or property. Select, colour and group them, and read every property, inherited ones too. Check a model against IDS: what fails is listed, and each failure can become a note. On an IFC 4.3 alignment, read station and offset, with cross and long sections. MEASURE • Distance with horizontal and vertical parts, and height • Face to face: wall thickness, clear width, clear height • The shortest distance between two elements, or from an element to the scan • A model's edge length and planar area; polylines, angles and best-fit areas • Notes anchored to a point or an element • Every pick is checked against the cloud at full resolution • Metric or imperial units SECTIONS AND ROOMS A box you move, turn and reshape by dragging, a plane or a slice. The model's solids are hatched where a cut crosses them. Save a cut with its view and return to it. SEEING THE SCAN RGB, intensity, classification, a heatmap, or elevation over the scan or a band of a few centimetres; a grid, side views, panoramas from the scanner's position. ISSUES IN BCF Notes leave as BCF topics with a viewpoint and the element they are on; BCF files from other tools open as notes. EXPORT The cloud or a single scan as E57 with panoramas, LAS, PLY or XYZ; a section as LAS; CSV, JSON with sections, BCF, a PNG snapshot. FREE AND PRO Free with one project; Pro removes the limit for a single payment, no subscription. Projects you have stay open either way. WHAT IT DOES NOT DO Point data is not edited, and tripod scans are registered in the scanner's software. Clouds in two coordinate systems are not brought into one. Models you open are never modified.
Screenshots
Verdict
The clearest difference is update cadence: Point Cloud & BIM Viewer at every 3 days against OnsiteBIM's every 9 days. On price, ads, in-app purchases and device support there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. OnsiteBIM sells 2 in-app purchases, starting at $14.99 per month and Point Cloud & BIM Viewer sells 1 one-off in-app purchase. Whichever you choose, the download price is not the number that matters.
OnsiteBIM ships an update every 9 days, Point Cloud & BIM Viewer every 3 days. Both last shipped on November 13, 2026.
| Parameter | OnsiteBIM | Point Cloud & BIM Viewer |
|---|---|---|
| Price | Free | Free |
| Rating | — | 5.0 (1 ratings) — better |
| Number of ratings | — | 1 — better |
| Update frequency | Every 9 days | Every 3 days — better |
| Ads | No | No |
| In-app purchases | Yes | Yes |
| Monetization | — | Free with in-app purchases |
| Devices | iPhone, iPad | iPhone, iPad, Mac — better |
| Requires iOS | 16.0 — better | 17.0 |
| Further details — not scored | ||
| Size | 26 MB | 45 MB |
| Age rating | 4+ | 4+ |
| Developer | Mihir Patel | Sew Grader by Virtalia |
In-app purchases
OnsiteBIM
- OnsiteBIM Pro Monthly7 Days trial$14.991 Month
- OnsiteBIM Pro Yearly7 Days trial$149.991 Year
Point Cloud & BIM Viewer
- Pointclouds Viewer Pro$9.99
Questions
Is OnsiteBIM free?
Is Point Cloud & BIM Viewer free?
Do OnsiteBIM or Point Cloud & BIM Viewer have ads?
Which is updated more often, OnsiteBIM or Point Cloud & BIM Viewer?
Other comparisons















