Moonlock vs Point Cloud & BIM Viewer
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Moonlock
Read full descriptionHide full description
Not sure about a message? Moonlock checks texts, screenshots, and QR codes for signs of a scam and tells you why. It also shows how well your iPhone is protected and what to do next. CHECK MESSAGES FOR SCAMS – Scam Detect: Paste a message, add a screenshot, or scan a QR code. Moonlock gives you a verdict and the reasons behind it, like a link that doesn't match the sender. – No switching apps: Long-press any text, tap Share, and choose Moonlock. Check a message right where you found it. – QR codes: See where a code actually leads before you open it. – Safe SMS: Once you turn it on in Settings, texts from unknown senders that look like scams go to Junk in Messages. Open Moonlock to see what was filtered and why. Nothing is deleted without you. SEE WHERE YOUR IPHONE STANDS – Quick first scan: Moonlock checks your Wi-Fi connection, Face ID or passcode, iOS version, and signs of a jailbreak as soon as you start. – Security Score: A score from 0 to 100 and a protection level show how well your iPhone is set up. – One step at a time: Instead of a long checklist, Moonlock suggests the most useful thing to do next. – Status updates when something changes: Join a new Wi-Fi network or fall behind on iOS updates, and you'll see it in the app. FIND OUT IF YOUR EMAIL WAS EXPOSED – Check up to 5 email addresses against known data breaches. – See which service leaked your data, when it happened, and what was exposed, such as passwords, phone numbers, or location. – Follow clear steps to secure each affected account, from changing the password to turning on two-factor authentication. SETTINGS WORTH CHANGING ONCE – Get a list of iPhone settings that make your phone safer, each with the reason it matters and how long it takes. – Follow step-by-step instructions with a short video. When you switch to Settings, the video keeps playing in a small window, so you can follow along. – Mark each setting as done once you've changed it. YOUR PRIVACY – Security checks run on your iPhone. We don't store your information. – Safe SMS only sees new texts from unknown senders, and only while it's on. Moonlock has no access to your message history. QUESTIONS Does Moonlock scan my iPhone for viruses? iOS doesn't let apps scan other apps or their files. Instead, Moonlock checks what it can: suspicious messages, QR codes, data breaches, your connection, and your iPhone's security settings. What can Moonlock see in my messages? Only the messages you share with Scam Detect, and new texts from unknown senders while Safe SMS is on. It can't read your message history. Moonlock for Mac is a separate app. SUBSCRIPTION – Moonlock comes with a 7-day free trial on a monthly or annual subscription. – Payment is charged to your Apple Account when you confirm your purchase. – Your subscription renews automatically unless you turn off auto-renewal at least 24 hours before the end of the current period. – Your account is charged for renewal within 24 hours before the end of the current period. – You can manage your subscription and turn off auto-renewal in your Apple Account settings after purchase. Terms of Use: https://moonlock.com/terms-of-use License Agreement (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: https://moonlock.com/privacy-policy
Point Cloud & BIM Viewer
Visualize and analyze 3D laser scans and BIM models directly on your device. Measure distances, compare designs to construction, and export results. All data remains local for enhanced privacy.
- Open E57, LAS, LAZ, PLY, IFC, USDZ, OBJ, STL, glTF, GLB formats
- Measure distances, dimensions, and areas
- Compare scan data against BIM models
- Create and export floor plans (IFC, DXF, SVG, PDF)
- View projects in Augmented Reality (AR)
- Georeference projects on a map
- Browse and inspect BIM model elements and properties
Read full descriptionHide full description
Point Cloud & BIM Viewer opens laser scans and BIM models on your Mac, iPad and iPhone — measure them, cut sections, see where the building differs from the design, and export the results. Everything stays on the device: no account, no upload. A sample project with a guide shows where everything is. FORMATS • E57 with registered scan setups, colour, intensity and spherical photographs • LAS and LAZ 1.0 to 1.4 with colour, intensity and classification, and COPC • PLY, PTS, PTX, and XYZ or TXT with intensity or RGB columns • IFC models, also zipped or gzipped; USDZ, USD, OBJ, STL, glTF and GLB • DXF plans under the scan, with layers to switch off • Several files, a folder or a zip as one project Import never modifies the original; a hundred million points take tens of megabytes. EVERYTHING IN ONE PROJECT The side panel lists the cloud and each of its scans, every model file, floor plan and saved cut. Show, hide, colour or look at each on its own; colour the scan setups to check the registration. Add scans later, send a project by AirDrop. THE SCAN AGAINST THE MODEL • Every point coloured by its distance to the model, with a tolerance you set • Which elements are built, which are missing, and where the scan never went • The elements built out of tolerance, listed • Place a model by pairs of corners, by the walls in the scan, by matching the floor plans, or where its georeference says • Measure from the scan to a surface of the model SCAN WITH LIDAR On an iPhone or iPad with LiDAR, scan a room into a project, fit it to the other scans, and continue later. For orientation, not millimetres. FLOOR PLAN RoomPlan draws the walls, doors and windows as you scan and divides the floor into rooms with their areas; walls found in any scan make a draft. Correct the plan, then export IFC, DXF, SVG or a PDF to scale. THE PROJECT IN AR On iPhone and iPad, stand the project on a table, or at 1:1 in the building by a few shared points, with a scan's panorama over the walls. ON THE MAP Coordinates as a surveyor writes them: S-JTSK Y and X, or E and N in the system the file or IFC georeference names. See the project on a map with an aerial view under the scan, or place it by hand; exports keep its place. The map loads from Apple Maps only when switched on. THE MODEL Browse elements by storey, class or file; find them by name, GlobalId or property. Select, colour and group them, and read every property, inherited ones too. Check a model against IDS: what fails is listed, and each failure can become a note. On an IFC 4.3 alignment, read station and offset, with cross and long sections. MEASURE • Distance with horizontal and vertical parts, and height • Face to face: wall thickness, clear width, clear height • The shortest distance between two elements, or from an element to the scan • A model's edge length and planar area; polylines, angles and best-fit areas • Notes anchored to a point or an element • Every pick is checked against the cloud at full resolution • Metric or imperial units SECTIONS AND ROOMS A box you move, turn and reshape by dragging, a plane or a slice. The model's solids are hatched where a cut crosses them. Save a cut with its view and return to it. SEEING THE SCAN RGB, intensity, classification, a heatmap, or elevation over the scan or a band of a few centimetres; a grid, side views, panoramas from the scanner's position. ISSUES IN BCF Notes leave as BCF topics with a viewpoint and the element they are on; BCF files from other tools open as notes. EXPORT The cloud or a single scan as E57 with panoramas, LAS, PLY or XYZ; a section as LAS; CSV, JSON with sections, BCF, a PNG snapshot. FREE AND PRO Free with one project; Pro removes the limit for a single payment, no subscription. Projects you have stay open either way. WHAT IT DOES NOT DO Point data is not edited, and tripod scans are registered in the scanner's software. Clouds in two coordinate systems are not brought into one. Models you open are never modified.
Screenshots
Verdict
The clearest difference is device support: Point Cloud & BIM Viewer at 3 against Moonlock's 1. Point Cloud & BIM Viewer also leads on iOS requirement (17.0 vs 26.0). On price, update cadence, ads and in-app purchases there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. Moonlock sells 2 in-app purchases, starting at $9.99 per month and Point Cloud & BIM Viewer sells 1 one-off in-app purchase. Whichever you choose, the download price is not the number that matters.
Moonlock ships an update every 4 days, Point Cloud & BIM Viewer every 3 days. The most recent releases landed on November 12, 2026 and November 13, 2026 respectively.
| Parameter | Moonlock | Point Cloud & BIM Viewer |
|---|---|---|
| Price | Free | Free |
| Rating | — | 5.0 (1 ratings) — better |
| Number of ratings | — | 1 — better |
| Update frequency | Every 4 days | Every 3 days — better |
| Ads | No | No |
| In-app purchases | Yes | Yes |
| Monetization | — | Free with in-app purchases |
| Devices | iPhone | iPhone, iPad, Mac — better |
| Requires iOS | 26.0 | 17.0 — better |
| Further details — not scored | ||
| Size | 129 MB | 45 MB |
| Age rating | 4+ | 4+ |
| Developer | MacPaw Way Ltd | Sew Grader by Virtalia |
In-app purchases
Moonlock
- Moonlock Monthly$9.991 Month
- Moonlock Yearly7 Days trial$49.991 Year
Point Cloud & BIM Viewer
- Pointclouds Viewer Pro$9.99
Questions
Is Moonlock free?
Is Point Cloud & BIM Viewer free?
Do Moonlock or Point Cloud & BIM Viewer have ads?
Which is updated more often, Moonlock or Point Cloud & BIM Viewer?
Other comparisons















