Glinster vs PLICATA
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Glinster
Read full descriptionHide full description
Glinster is a musical instrument and MIDI controller that you play on the glass of your iPhone and iPad. You rest your playing hand flat once and then reach up, and Glinster records where your fingers land. After that, wherever you put your thumb the notes appear beside it, and the grid keeps following your hand while you play. When you lift your hand, the last notes you played stay behind for a moment as a small constellation. Glinster also runs on Apple Vision Pro, where you play it in the air with your bare hands, without any controller. Both versions use the same sound engine, the same scales, and the same MPE MIDI output. On iPhone and iPad • Your four fingers on the resting row play the first four notes of the scale, reaching up plays the next four, and on a screen with room above, more rows continue the scale upward • Sliding a playing finger sideways bends the pitch and sliding it up and down changes the brightness, while sliding your thumb up and down controls the volume • Touching a new finger while another one plays lets the new one take over, with a glide instead of a new attack, with Mono on, or every finger plays its own note, each with its own bend and brightness, and the MIDI follows as one MPE note per finger • Resting a fingertip of your other hand next to the notes brings up the arrows, where one step up shifts a semitone and two steps an octave, the same below, and every arrow can be held together with the others • A finger on the arrows can slide between them, or wiggle sideways for vibrato, and sliding the resting fingertip sideways bends every note like a pitch wheel • Pitch Quantize locks a bent note onto the nearest scale note when you hold it still, and releases it again as soon as you move • Haptic feedback on every note and every arrow, switchable, and note names on the grid • Left-handed players are detected from the way they rest their hand • Runs as an AUv3 instrument and as a MIDI generator inside your iOS DAW • A guided first start that shows every gesture on the instrument itself On Apple Vision Pro • Touching your thumb to a fingertip plays a note, and palm down and palm up reach the whole scale • Raising your hand makes it louder, pushing forward makes it brighter, and moving sideways bends the pitch • Your other hand shifts semitones and octaves, and both hands can bend at the same time • A ruler shows the sounding note, how far it is bent, and the angle of each palm Sound and MIDI • Five sound presets: Aether, Ember, Fathom, Rime and Pillar • Room, Shimmer, Glide, Response, Cutoff and Resonance • Sixteen scales, from the seven modes to the blues, Whole tone and Double harmonic, and twelve roots, with a reference pitch from 432 to 446 Hz • MPE MIDI output that assigns a new channel to every note so that release tails don't get cut off, with the number of member channels your choice, or single-channel output, and a Send MCM button to repeat the MPE configuration for a receiver that started late • Volume and brightness sent as channel pressure, CC 7, CC 11, CC 74 or CC 1, and a pitch bend range of 2, 12, 24, 48 or 96 semitones • A virtual MIDI source, direct output to the MIDI port of any app, Bluetooth LE MIDI in both directions, and Apple's network MIDI session, so a session made in Audio MIDI Setup on a Mac can connect straight to the device • Records takes as lossless 32-bit float WAV files
PLICATA
This is a compact monophonic synthesizer for hands-on sound design and performance. It features a morphing oscillator, wavefolding, a resonant filter, and a flexible VCA contour, with an independent SUB oscillator for added depth. A 28-socket patch system allows for extensive audio, CV, and event routing.
- Morphing oscillator with wavefolding
- Independent SUB oscillator
- 28-socket patch system
- Microtonal XY keyboard
- 32-step arpeggiator
- Performance macros
- AUv3 support
Read full descriptionHide full description
PLICATA is a compact patchable monophonic instrument for hands-on sound design and performance. A morphing oscillator feeds wavefolding, a resonant filter and flexible VCA contour, while an independent SUB oscillator adds octave, interval and eight waveform modes. PATCH IT The 28-socket patch system opens audio, CV and event routing. Modulate FOLD without replacing the oscillator path, reset the LFO externally, replace the internal SUB source, control SUB level by CV, distribute modulation through MULT, or build feedback and audio-rate networks. Patch cables are recalled with your sounds. MICROTONAL XY PERFORMANCE The 13-key XY keyboard spans C4–C5. Tune every key independently by ±100 cents or start from 12-TET, Just Intonation, Pythagorean and quarter-tone templates. Horizontal movement adds pitch expression up to ±24 semitones; vertical movement can map each key to as many as eight sound parameters or performance macros. PERFORMANCE VIEW + 32-STEP ARPEGGIATOR Tap PERF for an expanded keyboard-focused surface. The arpeggiator follows INTERNAL, HOST or MIDI clock and offers UP, DOWN, UP/DOWN, AS PLAYED, RANDOM, WALK, CONVERGE, DIVERGE and CHORD styles across up to four octaves. Build patterns from 1 to 32 steps with independent pitch, octave, velocity, gate, probability and ratchet lanes. HOLD captures the note pool; FILL creates a momentary variation. Adjust swing, gate, velocity behavior, probability and ratchets live. Rotate patterns, create temporary MUTATE variations, FREEZE the result, and recall seven ARP scenes with optional MIDI keyswitch control. MACROS, MIDI AND SYNC Six bounded performance macros shape tone, motion, fold, envelope, drive and level. IGNITE is editable: choose multiple targets, ranges and response curves, then store the mapping independently from sound presets. Play compatible instruments from PLICATA’s built-in keyboard using MIDI or MPE OUT, with independent pitch expression for each note in MPE mode. PLICATA also supports MIDI/MPE input, host sync and externally reset or free-running LFO operation. COMPLETE SOUND STATES PLICATA ships with 20 factory sounds and a full user-preset system. User sounds recall synthesis, patch cables and performance configuration together. Search, organize, favorite, duplicate and tag sounds, or use GEN to create a complete new musical state without overwriting your library. USER presets share the same library between standalone and AUv3. Optional private iCloud sync keeps them available across devices using the same Apple Account. Local presets remain available offline; sync requires network access and available iCloud storage. STANDALONE + AUv3 Use PLICATA standalone or as an AUv3 instrument inside compatible Apple music hosts. FEATURES • Morphing oscillator, wavefolding and pulse-width shaping • Independent SUB oscillator with interval and eight waveform modes • Resonant filter, ADSR articulation and drive • 28-socket audio, CV and event patch system • 13-key microtonal XY keyboard with independent tuning • Dedicated PERFORMANCE view with expanded keyboard • 32-step arpeggiator with nine styles and three clock modes • Per-step pitch, octave, velocity, gate, probability and ratchet • HOLD, FILL, rotate, MUTATE/FREEZE and seven ARP scenes • Six performance macros plus editable IGNITE • MIDI/MPE input and built-in keyboard MIDI/MPE output • Factory and user presets with complete-state recall • Complete-state generation with GEN • Standalone and AUv3 operation Explore PLICATA: https://trambustissimo.com/#plicata Support: support@alessandroguardascione.com
Screenshots
Verdict
The clearest difference is review sentiment: Glinster at 100% against PLICATA's 67%. Glinster also leads on rating (5.0 vs 4.6). PLICATA's advantage is price ($7.99 vs $9.99) and ratings volume (5 vs 1). On ads, in-app purchases, device support and iOS requirement there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Glinster costs $9.99 and PLICATA $7.99 up front. Neither carries in-app purchases, so what you see is what you pay.
Glinster holds the better App Store score, 5.0 against 4.6. That said, the two scores are not equally well evidenced: PLICATA has 5 ratings behind it against 1, so its average is the more settled of the two. Written reviews point the same way: 100% of Glinster's written reviews are positive against 67% of PLICATA's.
| Parameter | Glinster | PLICATA |
|---|---|---|
| Price | $9.99 | $7.99 — better |
| Rating | 5.0 (1 ratings) — better | 4.6 (5 ratings) |
| Positive reviews | 100.0% of reviews — better | 66.7% of reviews |
| Number of ratings | 1 | 5 — better |
| Update frequency | — | Every 3 days |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | — | Paid |
| Devices | iPhone, iPad, Vision Pro — better | iPhone, iPad |
| Requires iOS | 18.0 | 17.0 — better |
| Further details — not scored | ||
| Size | 5 MB | 13 MB |
| Age rating | 4+ | 4+ |
| Developer | Uwyn, LLC | Alessandro Guardascione |
Customer experience
Glinster
PLICATA
In-app purchases
Glinster
No in-app purchases
PLICATA
No in-app purchases









