Comparison

PLC Ninja vs LScope

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

PLC Ninja

Monitor live data from industrial controllers directly on your iPhone. Safely view inputs, outputs, timers, and analog values in real-time without altering PLC programs. Connect via Ethernet, Wi-Fi, or serial adapters for on-site diagnostics.

Highlights
  • Real-time PLC data monitoring
  • Read-only safety design
  • I/O card visualization with notes
  • Tag, bit, word, and analog value monitoring
  • Alarm and trend charts for analog values
  • Drive status monitoring
  • Multiple connection methods (Ethernet, Wi-Fi, Serial)
Features
Read full description

PLC Ninja puts live PLC data on your iPhone. Connect over Ethernet, Wi-Fi, or a serial adapter, and watch inputs, outputs, timers, counters and analog values update in real time — standing at the panel, not walking back to the office. READ-ONLY BY DESIGN PLC Ninja reads and shows. It never changes the PLC program and never forces I/O, so it is safe to hand to any technician. When the logic has to change, your laptop and the PLC maker's software are still the tools for that. SEE I/O WHERE THE FAULT IS • I/O Cards: every module laid out by rack and slot, with your own notes on each point • Monitor: tags, bits, words and analog values, live • Sections: group the points for one station or one fault in a single view • Alarms and trend charts for analog values • Drives: speed, current and status at a glance CONNECT THE WAY THE MACHINE IS BUILT • Ethernet PLCs over plant Wi-Fi, a travel router, or a USB-C / Lightning to Ethernet adapter • Serial PLCs through a TCP/IP adapter such as PUSR USR-W610, PUSR USR-DR162 or Moxa NPort W2150A • Kit Router: one GL.iNet Opal (GL-SFT1200) — plus a Moxa NPort 5110A for serial PLCs — reaches Ethernet and serial machines from the same Wi-Fi, without changing any PLC address. PLC Ninja sets the router up from the iPhone. • PLC IP Detect finds PLCs and adapters on the network and fills in the new machine for you • Load an L5X, CSV or STEP 7 configuration for tag names, racks and descriptions SHARE WITH THE CREW • Print a Scan & Connect QR label for each machine: scan it, and the iPhone joins the Wi-Fi and connects • Share machine files by AirDrop, Messages or Mail SUPPORTED PLCs Allen-Bradley ControlLogix, CompactLogix, GuardLogix, Micro800, MicroLogix, SLC 500 and PLC-5; Siemens S7-1200, S7-1500, S7-300, S7-400, ET 200SP and LOGO!; Mitsubishi FX; AutomationDirect DirectLOGIC; Panasonic FP. The full list is in the app. TRY IT FREE The built-in Demo shows every feature with simulated data — no PLC needed, free on every plan. The Free edition includes a 14-day trial with one PLC (CPU rack digital I/O). SUBSCRIPTIONS Standard (up to 3 PLCs), Professional (up to 10 PLCs) and Ultimate (unlimited PLCs), billed monthly or yearly. Payment is charged to your Apple ID at confirmation of purchase. Subscriptions renew automatically unless cancelled at least 24 hours before the end of the current period. Manage or cancel in your Apple ID settings. PLC Ninja is an independent product and is not affiliated with, endorsed by, or sponsored by Rockwell Automation, Siemens AG, AutomationDirect, Mitsubishi Electric, Panasonic, Moxa, GL.iNet or PUSR. Allen-Bradley, ControlLogix, CompactLogix, GuardLogix, Micro800, MicroLogix, SLC 500, PLC-5, RSLogix and Studio 5000 are trademarks of Rockwell Automation. SIMATIC, S7, ET 200SP and LOGO! are trademarks of Siemens AG. DirectLOGIC is a trademark of AutomationDirect. MELSEC and FX are trademarks of Mitsubishi Electric. All other product names are trademarks of their respective owners and are used only to identify the equipment this app can connect to. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: https://plcninja-support.github.io/support/privacy.html

About

LScope

Read full description

Troubleshoot a stopped machine from your iPhone or iPad, and leave the floor with evidence instead of a memory. LScope connects to Allen-Bradley® Logix controllers over EtherNet/IP™ and reads tags from CompactLogix® and ControlLogix® processors. Arm a trigger on a tag condition, see which signals moved and in what order, see how long each step of the cycle takes, and log tags to a file. LScope only reads. It has no tag writes, controller downloads or online edits. CAPTURE WHAT HAPPENED AROUND AN EVENT Arm a trigger on a tag condition and leave LScope open with the screen awake. It records the sampled values before and after the trigger, marks the trigger on the timeline, and keeps the capture for review. SEE WHAT MOVED, AND IN WHAT ORDER Compare several tags on one time axis. Tap the lanes to read every value at one instant. FIND THE STEP THAT RUNS LONG Record a machine sequence and see how long each observed step took, with the slowest steps listed first. LOG TAGS TO A FILE Record up to 20 tags to CSV at a set interval or whenever a value changes. Gaps are marked, never filled in. WATCH THE TAGS THAT MATTER Build groups with your own names and units, browse the controller's tags or import a Studio 5000 Logix Designer® tag export with descriptions. Open any tag for a live trend. Set alarms on the values you watch. CHECK READINGS AGAINST EXPECTATIONS Verification checklists compare live values with the conditions you expect and show what is met, not met or unknown. SHARE WHAT YOU FOUND Export a capture, trend or log as PDF, image or CSV. Send a machine's setup to a technician by Messages, Mail or AirDrop; it opens in LScope with a review first. SHOWS WHAT IT COULD NOT READ Readings that fail or stop arriving are marked as missing or stale, never filled in with a guess. LScope cannot detect a reading that is wrong at the source, so verify critical values at the machine. TRY IT WITHOUT A CONTROLLER The built-in demo machine runs on simulated data, so you can learn every screen before you connect to real equipment. Simulated values are always labeled. WHAT YOU NEED - iPhone or iPad with iOS 17.6 or later. - A network route to the controller on TCP port 44818: an Ethernet adapter, plant Wi-Fi or an authorized VPN. - The controller's IP address and backplane slot, or a configured route. LScope does not scan the network for controllers. GOOD TO KNOW - LScope reads while it is open; iOS pauses it in the background. Reads every 100 ms to 2 s, as you choose; shorter changes can be missed. - STRING tags show as text. Whole structures are not shown as single values; open one to read its members. - Connections that require CIP Security™ are not supported. - Tested on CompactLogix 1769-L24ER (firmware 34) and 1769-L23E (firmware 20) controllers and a ControlLogix 1756-L73. SUBSCRIPTION LScope is free to download and includes the demo machine. Connecting to your own controllers requires the LScope Pro annual subscription, billed yearly at the price shown in the app. New subscribers get a 2-week free trial. Your Apple Account is charged when the trial ends unless you cancel at least 24 hours before. The subscription renews every year unless you cancel at least 24 hours before renewal. Manage or cancel in Settings > your name > Subscriptions. Terms of Use: https://lscope.app/terms.html Privacy Policy: https://lscope.app/privacy.html No account, no sign-in, no analytics and no ads. The app collects no data about you. Allen-Bradley, CompactLogix, ControlLogix and Studio 5000 Logix Designer are trademarks of Rockwell Automation, Inc. EtherNet/IP and CIP Security are trademarks of ODVA, Inc. LScope is an independent product of LeRoy Industrial LLC. It is not endorsed, sponsored, or certified by Rockwell Automation or ODVA.

Screenshots

PLC Ninja4 screens
LScope4 screens

Verdict

The call

The clearest difference is ratings volume: PLC Ninja at 3 against LScope's 1. On price, rating, ads and in-app purchases there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. PLC Ninja sells 6 in-app purchases, starting at $3.99 per month and LScope sells 1 in-app purchase, starting at $59.99 per year. Whichever you choose, the download price is not the number that matters.

ReceptionRating · Positive reviews · Number of ratings

On the App Store both sit at effectively the same score — 5.0 for PLC Ninja against 5.0 for LScope. Both are backed by a comparable volume of ratings — 3 and 1 respectively.

Scorecard1 real difference · 9 level
PLC Ninja versus LScope: the parameters behind the verdict, then further details
ParameterPLC NinjaLScope
PriceFreeFree
Rating5.0 (3 ratings)5.0 (1 ratings)
Positive reviews100.0% of reviews—
Number of ratings3 — better1
Update frequencyMonthly—
AdsNoNo
In-app purchasesYesYes
MonetizationFree with in-app purchases—
DevicesiPhoneiPhone, iPad — better
Requires iOS17.617.6
Further details — not scored
Size25 MB12 MB
Age rating4+4+
DeveloperSHAOHUA YILeRoy Industrial LLC

In-app purchases

6 purchases

PLC Ninja

Subscriptions6
  • Standard$3.991 Month
  • Professional$8.991 Month
  • Ultimate$14.991 Month
Show 3 more
  • Standard$39.991 Year
  • Professional$89.991 Year
  • Ultimate$149.991 Year
1 purchases

LScope

Subscriptions1
  • LScope Pro14 Days trial$59.991 Year

Questions

Is PLC Ninja free?
PLC Ninja is free to download, with in-app purchases available.
Is LScope free?
LScope is free to download, with in-app purchases available.
Which has better reviews, PLC Ninja or LScope?
PLC Ninja and LScope are both rated 5.0 out of 5 on the App Store, from 3 and 1 ratings respectively.
Do PLC Ninja or LScope have ads?
Neither PLC Ninja nor LScope shows ads.

Other comparisons