Comparison

PLC Simulator & Automation Lab vs Experimenters Circuits

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

PLC Simulator & Automation Lab

Build and simulate industrial automation circuits on your mobile device. Program PLCs using ladder logic and learn through interactive lessons and real-world challenges. No hardware required.

Highlights
  • Industrial automation circuit simulation
  • Ladder logic programming
  • 35+ industrial components
  • Realistic power chain simulation
  • Fault injection for diagnosis
  • 16 interactive training lessons
  • Project sharing via export/import
Features
Read full description

PLCForge is a complete industrial automation lab in your pocket. Drag and drop components onto the canvas, wire them with real connections, program the PLC with ladder logic, and watch your circuit run in real time — no hardware required. Whether you're an automation student, an electrical technician, or an engineer, PLCForge lets you test your ideas safely and instantly. ▶ WHAT YOU CAN DO • Place, wire, pan and zoom components on an interactive canvas • Simulate a realistic power chain: 3~ AC supply → power supply → PLC → outputs • Control the circuit live by tapping buttons, sensors and the E-stop • Watch motors spin, lamps light up and contactors pull in ▶ MOTOR CONTROL CIRCUITS Build classic control circuits the way they are wired in a real panel: contactors, overload relays, timer relays, push buttons and selector switches for DOL start-stop, seal-in, forward-reverse with electrical interlock, star-delta and sequential motor starters. Wire the control circuit and the power circuit on the same panel, run it and troubleshoot it. ▶ FULL SANDBOX PLC LADDER EDITOR Tap the PLC and write your own ladder program: • Contacts: NO / NC, rising & falling edge • Coils: output, SET, RESET (latching / sealing) • Timers: TON, TOF, TP • Counters: CTU, CTD • Compare (CMP) and math: ADD, SUB, MUL, DIV, MOV • Live signal graph and input simulator ▶ RICH COMPONENT LIBRARY PLC (CPU 1214C-style) + expansion modules (DI/DO/AI/AO) • push buttons (NO/NC) • emergency stop • selector & limit switches • contactor • thermal overload relay • relay • 3-phase induction motor • PNP sensor • analog / temperature / pressure sensors • indicator lamps • buzzer • timer relay • DC power supply • 3~ AC source • VFD (variable frequency drive) • servo drive • conveyor belt • pneumatic cylinder • solenoid valve ▶ FAULT SIMULATION Inject real-world short-circuit and open-circuit faults across 27 components. The safest way to learn troubleshooting and understand how circuits behave when things go wrong. ▶ STEP-BY-STEP GUIDED COURSE An interactive curriculum of 24+ stops, from beginner to advanced: Buttons → switches → emergency stop → lamps → relays → contactors → timers → counters → sensors → protection → motors → VFD → pneumatics → PLC basics → digital I/O → ladder logic → analog I/O → compare & math → SET/RESET → capstone projects. Every stop includes interactive demos and "Try on Canvas" circuits. ▶ CHALLENGES & READY-MADE TEMPLATES • Challenge tasks ordered from easy to hard • Prebuilt circuit templates: Motor Start-Stop, Sensor-Lamp, Timed Lamp, E-Stop Protected Motor, Conveyor System, Alarm Circuit, PLC Solenoid Valve, Analog VFD Speed Control and more ▶ PROFESSIONAL TOOLS • Save / load multiple projects • Undo / redo • Snap to grid • Zoom to fit • Wire labeling and coloring • Build and save your own templates ▶ 15 LANGUAGES Full support for English, Turkish, German, Spanish, Portuguese, Arabic, Indonesian, French, Italian, Polish, Czech, Vietnamese, Thai, Japanese and Hungarian. ▶ WHO IS IT FOR? • Automation and electrical engineering students • Vocational and technical school students • Field technicians and maintenance staff • Anyone learning PLCs from scratch • Engineers who want to prototype ideas fast Experiment as much as you like — no hardware to buy, no wiring risk. With PLCForge, learning automation is safe, hands-on and fun. Download now and build your first circuit!

About

Experimenters Circuits

Read full description

A circuit simulator for learning electricity and electronics. Pick components and instruments, place them in the workspace and connect their terminals with cables. The simulation runs while you build, so the meters and lamps respond to every new connection and every turn of a knob. WHO IT IS FOR Students studying electricity in school or at university, teachers demonstrating a circuit to a class, and anyone who wants to understand how a circuit works before building a real one. WHAT YOU CAN DO • Open a ready-made lab — Ohm's law, series and parallel circuits, capacitor charging, resonance, a rectifier, a transistor switch — and change it as you like. • Build circuits from power sources, resistors, capacitors, inductors, transformers, diodes, transistors, lamps, LEDs, switches and fuses. • Measure with an ammeter, voltmeter, wattmeter and oscilloscope. • Operate each instrument with its own controls: turn knobs, flip switches and press buttons. • Slow time down and watch what normally takes a fraction of a second. • Turn off the room light and see the lamps and LEDs glow. • Undo and redo your steps, copy part of a circuit and align everything to a grid. WHEN SOMETHING GOES WRONG The lab does not stop you from making a mistake. Short a power supply, and it switches itself off. Give a lamp too much voltage, and its filament flashes and burns out. An overloaded fuse blows. A source has internal resistance, a cable has a resistance of its own, and a meter slightly changes the circuit it measures. GOOD TO KNOW • Save your circuits and open them again later. • No account is needed to build, measure and save. • Remember: working with electricity in real life requires care.

Screenshots

PLC Simulator & Automation Lab4 screens
Experimenters Circuits4 screens

Verdict

The call

The clearest difference is in-app purchases: Experimenters Circuits at none against PLC Simulator & Automation Lab's 1. Experimenters Circuits also leads on update cadence (every 4 days vs every 3 weeks). On price, ads, device support and iOS requirement there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. PLC Simulator & Automation Lab sells 1 one-off in-app purchase. Experimenters Circuits asks for nothing beyond the download.

UpkeepUpdate frequency

PLC Simulator & Automation Lab ships an update every 3 weeks, Experimenters Circuits every 4 days. Both last shipped on November 13, 2026.

Scorecard2 real differences · 7 level
PLC Simulator & Automation Lab versus Experimenters Circuits: the parameters behind the verdict, then further details
ParameterPLC Simulator & Automation LabExperimenters Circuits
PriceFreeFree
Rating4.1 (8 ratings) — better—
Number of ratings8 — better—
Update frequencyEvery 3 weeksEvery 4 days — better
AdsNoNo
In-app purchasesYesNo — better
MonetizationFree with in-app purchases—
DevicesiPhone, iPad, iPodiPhone, iPad, Mac
Requires iOS15.0 — better16.0
Further details — not scored
Size41 MB196 MB
Age rating4+4+
DeveloperUGUR AKSOYVIKTOR GRIGOREV

In-app purchases

1 purchases

PLC Simulator & Automation Lab

One-time1
  • PLCForge Premium$14.99
None

Experimenters Circuits

No in-app purchases

Questions

Is PLC Simulator & Automation Lab free?
PLC Simulator & Automation Lab is free to download, with in-app purchases available.
Is Experimenters Circuits free?
Experimenters Circuits is free to download, with no in-app purchases.
Do PLC Simulator & Automation Lab or Experimenters Circuits have ads?
Neither PLC Simulator & Automation Lab nor Experimenters Circuits shows ads.
Which is updated more often, PLC Simulator & Automation Lab or Experimenters Circuits?
PLC Simulator & Automation Lab ships an update every 3 weeks, and Experimenters Circuits every 4 days. Most recently, PLC Simulator & Automation Lab was updated on November 13, 2026 and Experimenters Circuits on November 13, 2026.

Other comparisons