Chess Rating Calculator vs Meshwise
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Chess Rating Calculator
Read full descriptionHide full description
Your rating is a number you only ever hear about second-hand — weeks after the tournament, when the list is finally published. This app gives it to you the moment the game ends, and it answers the question that actually matters: what will the next tournament do to it? You enter the opponent's rating and the result. That is the whole input. There is no board, no engine, no account and no server — just the published Elo mathematics, run on your own results, offline. HOW IT WORKS • Expected score E = 1 / (1 + 10^((Rb − Ra) / 400)), rating change ΔR = K × (S − E) — the two lines every federation formula starts from. • Choose your rule set: tiered K (40 / 20 / 10 by rating and games played), a simplified formula with a bonus threshold, or a fixed K of 10 to 40 for club ladders and online leagues. • The 400-point rule can be switched on or off. • Tournament mode is round by round: the total rating change, the performance rating and the TPR when you close it. • No rating yet? Five or more games produce your first one — average opponent plus the dp table. WHAT THE NEXT TOURNAMENT DOES TO IT This is the screen the app exists for, and it works in both directions. • Forward: set the rounds, the average opponent rating and a score. Nine rounds against an average of 1850, score 5½ — there is your new rating, before a single move. • Backwards: name a target rating and it solves the same equation for the smallest half-point score that gets you there. If a perfect score still falls short, it says so. • And the question nobody likes asking: exactly how many points one loss would cost you. THE CAREER LEDGER • Your rating curve across every saved tournament, with the 2000, 2200 and 2400 lines on it. • Peak rating, and the points left to the next threshold. • Games this month, average performance rating, and your best win. • A monthly calendar of the days you played. • Daily, weekly and monthly challenges, plus 95 badges for what actually moves a rating: playing often, beating players above you, finishing unbeaten, crossing a threshold. WHAT IT IS — AND IS NOT Every number here is an estimate for personal tracking, produced with the same published mathematics that federation systems use. It is not an official rating, this app is not affiliated with or endorsed by any chess federation, and nothing in it can be used to enter a tournament. It also will not reproduce the rating you see on online chess sites — those use Glicko-style systems with their own parameters. This is federation-style Elo. Your games stay on your device. No account, no analytics, no connection required. CHESS RATING PRO The app is premium: the calculator, tournament mode, the projection screen and the career ledger are part of Chess Rating Pro. • A recurring subscription, with the first period at a reduced price • Or a one-time purchase that never renews Subscriptions renew automatically unless cancelled at least 24 hours before the current period ends. Payment is charged to your Apple Account at confirmation of purchase, and renewal is charged within 24 hours before the period ends. Manage or cancel any time in your Apple Account settings. The one-time option is a single payment and is not a subscription. Terms of Use: https://doesonejob.com/eloledger/terms/ Privacy Policy: https://doesonejob.com/eloledger/privacy/ Questions or ideas: eloledger@doesonejob.com
Meshwise
This app uses LiDAR to create dimensioned floor plans and drywall takeoffs from unfinished spaces. It measures walls, identifies bulkheads, and estimates drywall needs. Scans are processed and stored locally on compatible Apple devices.
- Dimensioned floor plans
- Drywall takeoff estimation
- Wall measurements to stud face
- Bulkhead and soffit detection
- Export to CAD and BIM formats
- On-device processing
- Privacy-focused, no account needed
Read full descriptionHide full description
Meshwise needs a LiDAR sensor: iPhone 12 Pro and later Pro and Pro Max models, and iPad Pro models from 2020 on. It cannot scan on other devices. Meshwise turns a walk through an unfinished room into a dimensioned floor plan and a drywall takeoff. Walls are measured to the stud face, bulkheads and soffits are picked up as objects with their own drop, and the app estimates how many sheets of drywall the job needs. Scans are processed on the device and stay there. There is no account, no upload and no subscription. WHAT YOU GET • A dimensioned floor plan with every room named and measured • Wall dimensions taken at the stud face, the surface the drywall will hang on • Bulkheads and soffits as objects on the plan, with drop and clearance • A drywall takeoff per room: wall, ceiling and bulkhead square footage, with sheet counts at 4×8 and 4×12 and a waste factor • Ceiling joist height for the space • A two-point measure tool in the plan and in 3D • Markers for the electrical panel, sump, floor drain, egress window and Lally columns BUILT FOR UNFINISHED SPACES Most scanning apps expect flat painted drywall and a finished ceiling. Meshwise was written for open studs, exposed joists, batt insulation, ductwork and a basement full of stored boxes. It finds a wall from where the LiDAR returns meet the floor and the joists rather than from how smooth the surface looks. EXPORTS PDF plan sheet, DXF and IFC for CAD and BIM, plan JSON, OBJ, GLB, USDZ for AR Quick Look, an STL model at 1:100, LAS and PLY point clouds, a takeoff CSV and a self-contained web page. Object scans export as a printable STL in millimeters with a closed base, Z-up, ready for a slicer. EDIT THE PLAN BY TYPING On a device that supports Apple Intelligence, type the change you want, such as "rename Stairs to Stairwell" or "remove the bulkhead in the utility room", and Meshwise applies it. The model runs on the device and the plan is never sent anywhere. On other devices the same edits are available from the manual controls. PRIVACY Meshwise contains no networking code, no account system, no analytics, no advertising and no third-party SDKs. Scans are stored in the app's folder on your device, where the Files app can reach them. An optional switch in Settings, off by default, copies scans to your own iCloud Drive. The App Store privacy label reads "Data Not Collected". NINE LANGUAGES English, Spanish, Arabic, German, French, Hindi, Korean, Simplified Chinese and Traditional Chinese. Lengths and areas in feet and inches or in meters. FREE AND PRO Scanning, plan extraction, room naming, the 2D plan, the 3D view, the measure tool, markers, the ceiling clearance map and the Apple Intelligence editor are free with no limit on rooms. The PDF plan sheet, plan JSON and takeoff CSV are free as well, so the numbers can be checked before anything is paid for. Meshwise Pro is a single one-time purchase that unlocks the CAD and 3D formats (DXF, IFC, OBJ, GLB, USDZ, STL, LAS, PLY), the web page, the everything zip and iCloud Drive backup. Family Sharing is supported. ACCURACY Meshwise is an estimating and visualization aid. Dimensions are estimates from a consumer LiDAR scan, typically within about 1 inch and up to 3 inches or more in poor light, on dark or reflective surfaces, or in cluttered spaces. Material quantities are estimates and include an assumed waste factor. Meshwise is not a survey and is not suitable for permits, structural or engineering decisions, legal descriptions or property boundaries. Verify critical dimensions on site with a tape measure before ordering materials or building. Terms of Use: https://meshwise.jolleytech.com/terms Privacy Policy: https://meshwise.jolleytech.com/privacy Support: https://meshwise.jolleytech.com/support
Screenshots
Verdict
Chess Rating Calculator and Meshwise are too close to call on the numbers: across 5 compared parameters — price, ads, in-app purchases and device support among them — neither pulls far enough ahead to decide it. What separates them is feature set and interface, not measurable difference.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. Chess Rating Calculator sells 4 in-app purchases, starting at $3.99 per 7 days and Meshwise sells 1 one-off in-app purchase. Whichever you choose, the download price is not the number that matters.
| Parameter | Chess Rating Calculator | Meshwise |
|---|---|---|
| Price | Free | Free |
| Rating | — | 5.0 (1 ratings) — better |
| Number of ratings | — | 1 — better |
| Ads | No | No |
| In-app purchases | Yes | Yes |
| Monetization | — | Free with in-app purchases |
| Devices | iPhone, iPad | iPhone, iPad |
| Requires iOS | 17.0 — better | 18.0 |
| Further details — not scored | ||
| Size | 11 MB | 6 MB |
| Age rating | 4+ | 4+ |
| Developer | YUSUF OCAL | Luke Dutton |
In-app purchases
Chess Rating Calculator
- Chess Rating Pro Weekly7 Days trial$3.997 Days
- Chess Rating Pro Monthly$7.991 Month
- Chess Rating Pro Yearly$14.991 Year
- Chess Rating Pro Lifetime$19.99
Meshwise
- Meshwise Pro$14.99
Questions
Is Chess Rating Calculator free?
Is Meshwise free?
Do Chess Rating Calculator or Meshwise have ads?
Other comparisons















