SDC vs PA Align Pro
Price, ratings, monetisation and update history for both apps, side by side ā with what reviewers say about each.
SDC
Read full descriptionHide full description
stop guessing - start measuring. you are a touring dj or a sound engineer on a tight schedule and a tighter budget. sdc gets your subs and tops aligned with the gear you already carry. WHAT YOU NEED - iPhone, iPad or Mac - an audio interface, or the usb card already in your mixer - a measurement microphone run the output and the microphone through the same interface. that shared sample clock is what makes the timing trustworthy, and sdc warns you when the two don't match. a built-in phone mic is fine for a rough look - a measurement mic on one shared clock is what you want when it counts. HOW IT GOES 1. hook it up and pick your input and output channels 2. hit start - a level check runs first so you can set your gain 3. the app walks you through it: mute the sub and it measures the top, mute the top and it measures the sub 4. read the answer WHAT YOU GET not a chart to interpret. a sentence to act on: "increase sub delay by 0.8 ms to reach phase alignment at 100 Hz" and the numbers behind it: arrival times for top and sub, the difference in milliseconds and in metres, how far the phase is off at your crossover, and how high up the two stay inside the 60 degree corridor. tell sdc if your dsp or sub runs a 180 degree polarity flip and it aims at the right target angle. set the value on your mixer or dsp. done. THE ROOM, IF YOU WANT IT after a measurement you can add a room sweep to the same export. sdc plays a reference sweep, records the response, and hands you both files as a stimulus/response pair for whatever analyser you already use. no analysis happens in the app - that part stays in your tool. for sweeps, use an interface. a phone's built-in speaker and mic don't share a tight enough clock, and the recording gets rejected on import. BUILT FOR THE FIELD - a guide inside the app: signal chain, mic position and height, the full workflow - an ear protection warning before anything loud plays - works with what you have: usb interfaces, mixer usb cards, wired measurement mics YOUR DATA STAYS YOURS no account, no network, no tracking, no ads. every export lands on your device and goes nowhere unless you send it yourself.
PA Align Pro
Read full descriptionHide full description
Organize your PA soundcheck, calculate the delay between two speakers and keep setup records on your device. START WITH FREE OFFLINE TOOLS Record a basic setup and check connections, routing and levels manually. Enter each speaker's distance to the same listening position and the air temperature to estimate the geometric delay. A diagram and worked example explain the calculation. Save, reopen, edit or duplicate basic setups for the next job. UNLOCK PRO WITH A ONE-TIME PURCHASE Lifetime access, with no subscription. Pro adds: ⢠A professional setup workflow with multiple speakers, known electronic latencies and advanced environmental inputs. ⢠Limiter calculations for RMS voltage, a threshold in dBu and, with the required equipment data, dBFS and headroom. ⢠Pink noise, white noise, sine tones and frequency sweeps. ⢠Relative polarity comparison against a valid reference in the same signal chain. ⢠Locally generated PDF reports with inputs, calculated results, assumptions, notes and recorded checks. Once activation is confirmed, Pro tools and reports also work offline. Purchasing and restoring require internet and the correct store account. Reinstalling may require a restore. Calculations depend on your inputs and equipment specifications; verify the settings on the actual sound system. The app does not apply DSP settings or guarantee speaker protection. Checks are entered by the technician and do not certify an installation. Relative polarity comparison can be inconclusive; it does not measure absolute polarity, frequency-dependent phase or acoustic delay. The generator's digital output level is not a calibrated SPL measurement.
Screenshots
Verdict
The clearest difference is price: PA Align Pro at Free against SDC's $3.99. SDC's advantage is in-app purchases (none vs 1). On ads, device support and iOS requirement there is nothing between them.
Scored on Price Ā· Rating Ā· Positive reviews Ā· Number of ratings Ā· Update frequency Ā· Ads Ā· In-app purchases Ā· Monetization Ā· Best chart rank Ā· Devices Ā· Requires iOS
PA Align Pro is free to download; SDC costs $3.99 up front. PA Align Pro sells 1 one-off in-app purchase. SDC asks for nothing beyond the download.
| Parameter | SDC | PA Align Pro |
|---|---|---|
| Price | $3.99 | Free ā better |
| Update frequency | Every 5 days | ā |
| Ads | No | No |
| In-app purchases | No ā better | Yes |
| Devices | iPhone, iPad, Mac | iPhone, iPad, iPod |
| Requires iOS | 16.0 | 15.0 ā better |
| Further details ā not scored | ||
| Size | 4 MB | 80 MB |
| Age rating | 4+ | 4+ |
| Developer | frank Barsch | Mateus Polonini Cardoso |
In-app purchases
SDC
No in-app purchases
PA Align Pro
- PA Align Pro Lifetime$14.99









