Light Meter vs EVen
Price, ratings, monetisation and update history for both apps, side by side β with what reviewers say about each.
Light Meter
This app functions as a light meter for film and digital photography, utilizing your iPhone's camera to provide precise shutter speed and aperture settings based on your chosen ISO. It offers live updating readings, spot metering, and calibration options to ensure accuracy for various shooting conditions and camera setups.
- Live updating exposure readings
- Aperture or shutter priority modes
- Spot and average metering
- Adjustable stops for aperture, shutter, and ISO
- Calibration for accurate readings
- Long exposure support (Pro feature)
- Saved camera and roll notes (Pro feature)
Read full descriptionHide full description
Middlegray is a light meter for film and digital cameras. Point your iPhone at the scene, and it gives you the shutter speed or aperture to set for the ISO you choose. BUILT TO STAY LIVE Readings update live while you meter. If the camera feed stops, the reading clears and a restart button appears, so a stale reading doesn't sit on screen looking current. If the camera pauses, for example because another app is using it, Middlegray tells you why. A held reading stays on screen even if the camera stops. METERING β’ Aperture priority or shutter priority β’ Tap the preview to meter a small spot, or tap Average to meter everything the preview shows β’ Hold a reading while you set your camera β’ Each reading shows whether it is still settling or steady β’ The screen stays awake while you meter β’ "Too dark" tells you when the light is below what the iPhone camera can measure YOUR STOPS, YOUR CAMERA β’ Full, Β½ or β stops for aperture, shutter speed and ISO β’ Apertures from f/0.95 to f/128 β’ Shutter speeds from 1/8000 s to 30 s, with longer exposures shown as a B time β’ ISO 3 to 25600, with film speed presets from 50 to 3200 β’ ND filters up to 20 stops, allowed for in the reading β’ Lens presets from fast prime to large format, and shutter presets for mechanical and leaf shutters β’ When the exposure falls between marked stops, it shows the difference, such as +β β’ When your lens or shutter can't reach the exposure, it shows how many stops over or under CALIBRATION Every iPhone camera differs slightly. Meter the same evenly lit midtone with Middlegray and with your camera's meter, or another meter you trust, then adjust the calibration offset until they agree. The offset covers Β±3 EV in β stops and is saved for your iPhone model. ACTION BUTTON On iPhone models with an Action button, set it to Middlegray's Meter Light shortcut. Press and hold the button to open Middlegray straight into live metering, releasing any held reading. HOW REFLECTED METERING WORKS Like every reflected light meter, Middlegray assumes the scene averages to middle gray. Snow or a white wall reads too dark and a black coat too bright, unless you meter a midtone or tap to meter a spot. The first launch explains this and how to calibrate. WHAT IT DOESN'T DO Middlegray reads reflected light through the iPhone camera. It doesn't do incident metering or color temperature. MIDDLEGRAY PRO The meter is free. Pro is one purchase, not a subscription, and adds: β’ Long exposures: reciprocity correction for 16 films from Ilford, Kodak and Fujifilm data sheets, and a timer for B β’ Saved cameras: each camera's apertures, shutter speeds and film, one tap apart β’ Roll notes: every frame's settings as you shoot, shared as text You can try each first: three timed long exposures, one camera and your first roll are free. No ads and no account.
EVen
Read full descriptionHide full description
Read the light. Focus on the photograph. EVen is a reflected-light meter that uses your deviceβs camera exposure information to calculate ISO, aperture, and shutter speed. Continuous metering, priority modes, and exposure compensation come together on one clear screen. β’ Continuous or tap-to-meter Tap the center box to switch between LIVE and TAP. The label at the top shows the current mode. Continuous metering starts on launch and resume. In tap mode, tap the bottom meter button for a fresh reading that stays until your next tap. Your choice is remembered, and the screen stays awake while you use the app. β’ Pick up where you left off Your last A/S/M mode, ISO, aperture, shutter speed, and exposure compensation are saved automatically on your device. Reopen the app with your chosen values intact. Only the automatic value updates with the light: shutter speed in A mode, aperture in S mode. No need to set up again. β’ Choose your priority In A mode, set ISO and aperture to calculate shutter speed. In S mode, set ISO and shutter speed to calculate aperture. In M mode, adjust all three values and see the difference from your target exposure. β’ Make exposure your own Adjust from β3 to +3 EV in β -stop steps. Positive compensation recommends a brighter exposure; negative compensation recommends a darker one. Apply compensation to a measured result and reset to 0 EV with one tap. β’ Familiar stop increments Choose full, half, or third stops independently for aperture and shutter speed. Your choice applies to the dial and calculated recommendations. β’ Camera data, designed for accuracy Exposure values are calculated from the ISO, aperture, and shutter-speed metadata reported by your camera. β’ Center spot or center weighted Center spot is the default. Choose center-weighted metering in Settings. On supported devices with iOS 26 or later, the spot region matches the inside of the center box. Unsupported regions fall back to center-weighted or automatic metering, with the applied method shown on screen. β’ A layout that fits your screen Wide and landscape windows place the preview and controls side by side. Portrait screens fit the preview and controls without scrolling. Very large accessibility text or unusually short windows can still scroll. β’ Guided camera calibration Follow a simple guide to compare with a reference camera or meter. Device calibration is stored locally and kept separate from creative exposure compensation. β’ A quieter interface Appearance and language follow your system by default. You can also choose light or dark mode and select Korean or English. Target settings span ISO 25β25600, f/1β64, and 30 secondsβ1/8000 second. β’ Private by design No account, ads, or in-app purchases. Camera frames and meter readings are never saved or uploaded. A physical iPhone or iPad with a rear camera and camera permission is required. The displayed exposure settings are intended for your camera or film; they do not change the phoneβs physical aperture. Reflected-light readings vary with subject reflectance, backlighting, very low light, and device characteristics. Compare and calibrate against a reference meter before important shoots.
Screenshots
Verdict
The clearest difference is in-app purchases: EVen at none against Light Meter's 1. EVen also leads on device support (3 vs 1) and iOS requirement (15.0 vs 26.0). On price and ads there is nothing between them.
Scored on Price Β· Rating Β· Positive reviews Β· Number of ratings Β· Update frequency Β· Ads Β· In-app purchases Β· Monetization Β· Best chart rank Β· Devices Β· Requires iOS
Both are free to download. Light Meter sells 1 one-off in-app purchase. EVen asks for nothing beyond the download.
| Parameter | Light Meter | EVen |
|---|---|---|
| Price | Free | Free |
| Positive reviews | 100.0% of reviews | β |
| Update frequency | Every 3 days | β |
| Ads | No | No |
| In-app purchases | Yes | No β better |
| Monetization | Free with in-app purchases | β |
| Devices | iPhone | iPhone, iPad, iPod β better |
| Requires iOS | 26.0 | 15.0 β better |
| Further details β not scored | ||
| Size | 5 MB | 24 MB |
| Age rating | 4+ | 4+ |
| Developer | Kiducate Ltd. | ohsung kwon |
In-app purchases
Light Meter
- Middlegray Pro$1.99
EVen
No in-app purchases









