WiFiCast vs NetProbeX

WiFiCast is an application that enables us to communicate in a way similar to the walkie-talkies using different devices connected to the same wifi network. To do that it uses multicast, a transmission data protocol that allows us to send data from an emitter to many receivers in a way that the network traffic is not dependent on the number of receivers. WiFicast default startup mode is listening. That mode enables us to listen to what others in the network may be emitting. For us to be able to talk all we need to do is to change the segmented control from listening to speaking. We have two different ways to exit the application. If we push the exit button on the application interface, we will stop completely the service, that means that we will be unable to speak or listen anymore. If we exit the application by other means (eg: pushing the home button) the service will remain active, that way we will be able to speak or listen (depending on how the segmented control to do that was left). If we want to completely stop the service we will have to go to the application and push the exit button.

NetProbeX shows you what's actually on your network — not just that a device exists, but what it's running and what it's exposing. WHY NETPROBEX Most network scanners tell you "a device is here" and stop. NetProbeX goes further: tap any open port and see the exact raw data the service sends back, in hex and ASCII, just like a professional network tool. No other consumer scanner shows you this. Everything runs on your device. There's no account to create, no cloud backend, and nothing about your network is ever sent anywhere except the one optional, manual public-IP check you can trigger yourself. WHAT YOU CAN DO • Discover every device on your Wi-Fi — routers, phones, laptops, printers, smart speakers, cameras — with real names via mDNS/Bonjour, not just IP addresses. • Raw Response Inspector — tap an open port and see the exact bytes the service returns. Copy it, export it, or send your own custom probe. • Hidden Camera Finder — scan for exposed RTSP/DVR camera ports, the kind hidden cameras and unsecured IP cameras commonly leave open. • Router Vulnerability Check — a read-only look at whether your router has UPnP, NAT-PMP, or Telnet left open, the three most common home-router misconfigurations. • Real diagnostics — actual ICMP ping and traceroute (not an approximation), DNS lookup, and an internet speed test. • Wake on LAN — save a device's MAC once and wake a sleeping PC or NAS on demand. • Rename, label, and hide devices — keep notes on a busy network so you can identify the culprit fast if something causes a slowdown or an IP conflict. • Save scans and revisit them anytime. HONEST ABOUT WHAT IT CAN'T DO Apple restricts what any app — including NetProbeX — can see about other devices' real hardware (MAC) addresses, as a privacy protection. NetProbeX respects this rather than trying to work around it: device identification relies on network behavior, hostnames, and mDNS names, which is what makes NetProbeX reliable where other scanners overpromise. Built for anyone who's ever wondered "what is that device on my network?" — from home users curious about their smart devices to IT-minded people managing a busy office Wi-Fi.