VersaTech Recloser Programmer vs uGI1 Config

The Hubbell Power Systems 'VersaTech® Recloser Programmer' for iPad and iPhone apps allow communication with Versa-Tech® I (VT-I), Versa-Tech® LT (VTLT), Versa-Tech® II (VT-II) or Versa-Tech® XC (VT-XC) Reclosers equipped with WiFi modules. With the iPad version, users can read and program settings, download Event and Data Logs and perform other functions, as they would when using a laptop computer and a remote radio. The iPhone version has restricted capabilities such as viewing, generating reports, and limited command functions. Specifically, using the iPad 'VersaTech Recloser Programmer' customers can: - Flash Beacon functionality to identity recloser in the field. - Read and Program Versa-Tech Recloser settings. - Monitor Real-Time Current Data on the Versa-Tech Recloser. - View Data Log and View Demand Graph. - Download Versa-Tech Event Log. - View, Download and Edit Versa-Tech Scratchpad. - Download and Save PDF format reports on the iPad that could be shared via email. - Change the Wi-Fi SSID and password from the app. - For the Versa-Tech II and XC, customers can also · View Device and Audit Logs · View Oscillogram for overcurrent events · Export Demand log, Event log, Device log and Oscillogram data/graph as a report and view them instantly or offline · Set the Recloser in Hot Line Tag/Non-Reclose from the app · Trip, Close or Lockout the Recloser from the app · Create multiple users and permission levels

*** Requires a corTalk® uGI1 to use. *** Contact us at 'sales.ugi1@mobiltex.com' to purchase. This app is for configuring the uGI1 (Micro GPS-enabled Interrupter 1). The uGI1 is used to monitor and control a cathodic protection rectifier by switching a relay at precisely scheduled intervals. This app allows access to basic information on the uGI1 and allows setting up 10 different profiles to meet the customer's needs. Note that logs, due to their size, can only be extracted from the uGI1 using the PC configuration application through the USB port. The app has three tabs, a 'Settings' tab, 'Profiles' tab and 'Live Profile' tab. The 'Settings' tab allows for seeing a detailed status of the device, any recent faults that have arisen, manually setting the Real Time Clock (RTC), setting the unit's name, adding notes and rebooting the device. The 'Profiles' tab allows for the custom configuration of up to 10 independent profiles. It can read/write them from/to the unit and set their values. In addition, the profiles can be reset to their default values. The 'Live Profile' tab gives real time live information on the uGI1 Profile. The uGI1 must initially be put in Bluetooth pairing mode and a pairing code entered on the app. The pairing code (default=123456) can be found and changed with the PC configuration application. Once paired, the iOS device can reconnect without needing to re-enter the code or put the uGI1 back into pairing mode. Only iOS devices supporting Bluetooth 4.0 (LE) can connect to the RBT1 with this app. (iPhone 4S and newer and iPad 3rd gen and newer)