VersaTech Recloser Programmer vs RMU3 Config

The Hubbell Power Systems 'VersaTech® Recloser Programmer' for iPad and iPhone apps allow communication with Versa-Tech® I (VT-I), Versa-Tech® LT (VTLT), Versa-Tech® II (VT-II) or Versa-Tech® XC (VT-XC) Reclosers equipped with WiFi modules. With the iPad version, users can read and program settings, download Event and Data Logs and perform other functions, as they would when using a laptop computer and a remote radio. The iPhone version has restricted capabilities such as viewing, generating reports, and limited command functions. Specifically, using the iPad 'VersaTech Recloser Programmer' customers can: - Flash Beacon functionality to identity recloser in the field. - Read and Program Versa-Tech Recloser settings. - Monitor Real-Time Current Data on the Versa-Tech Recloser. - View Data Log and View Demand Graph. - Download Versa-Tech Event Log. - View, Download and Edit Versa-Tech Scratchpad. - Download and Save PDF format reports on the iPad that could be shared via email. - Change the Wi-Fi SSID and password from the app. - For the Versa-Tech II and XC, customers can also · View Device and Audit Logs · View Oscillogram for overcurrent events · Export Demand log, Event log, Device log and Oscillogram data/graph as a report and view them instantly or offline · Set the Recloser in Hot Line Tag/Non-Reclose from the app · Trip, Close or Lockout the Recloser from the app · Create multiple users and permission levels

*** Requires a corTalk® RBT1 or RMU123PGM and RMU3 to use. *** Contact us at 'sales.rmu3@mobiltex.com' to purchase. This app is for configuring the corTalk® RMU3 (Remote Monitoring Unit 3) with a Bluetooth configuration interface. Both the RBT1 or RMU123PGM are compatible. They both function as a complete RMU3 programming interface but only requires the Bluetooth connection of your phone to use. The RMU3 is used to monitor a cathodic protection rectifier with accurate measurement of a wide variety of signals; it can also control the rectifier for survey operations by switching a relay at precisely timed intervals. This app allows access to diagnostic information on the RMU3 and allows setting up the configuration to meet the customer's needs. Note that measurement data logs, due to their size, can only be extracted from the RMU3 using the PC configuration application through the USB port. The app allows full configuration of the RMU3 including - slot measurement types - limits - slot scaling and offset - relay options - instant off timing - interruption On/Off/Cycle Other features include the - viewing of readings and their limits - detailed status screen for troubleshooting - integrated manual - wiring diagrams for each measurement type The RBT1 and RMU123PGM is always in a Bluetooth pairing mode and requires a pairing code entered on the app. The pairing code (default=123456) can be found and changed with the app. Once paired, the iOS device can reconnect without needing to re-enter the code. The RBT1 pairing code can be reset by tapping the RBT1 5 times in 10 seconds with a user-supplied magnet.