Sat>IP Alignment vs SatCatcher

This application is designed to help users point their satellite dish/antenna using a SAT>IP server or a SAT>IP compliant IP-LNB. For a semi-precise first alignment, users can first use the augmented reality tracker which will save time while searching for the orbital position. It uses location, compass and camera sensors from the user's mobile phone or tablet and will guide the user in the right direction. After this initial step, the user can use the calculated azimuth, elevation and tilt values to calibrate the satellite dish/antenna. Once everything is set up correctly, the user should connect to the SAT>IP server, select the satellite transponder used for pointing and then press "scan". The analyzer will give the user all required information to fine-tune the pointing and after signal lock has been obtained will provide a list all of the available channels on that transponder.

Dish alignment, pointing and Installation has always been a complicated task, especially if you do not have a clue. That is why I posted this application that will simplify this task and allow you to install and align your antenna without the need to call a specialist. SatCatcher is a satellite finder and dish pointer, it allows you to orient your antenna to any satellite. Using augmented reality, this application displays the target satellite in space to better choose the location of your antenna and ensure the absence of any obstacle (wall, tree ...). SatCatcher also uses your phone GPS to show your location on a map and shows the direction of the satellite from your position. The compass accompanied by a beep lets you orient your antenna following the acceleration of beeps or the arrow of the compass. The accelerometer is used to verify that the holder of your antenna is vertical. The antenna adjustment steps: 1- choose a satellite and authorize geolocation to determine the direction of the antenna orientation. 2- Show satellite in augmented reality with your camera and make sure there are no obstacles and validate the location of your antenna. 3. Check that the support of your antenna is vertical. 4. Calculate the polarization and adjust the rotation of the LNB (the head of your antenna) 5. Set the elevation 6- Search orientation with visual and sound assistant 7- Fine adjustments. For the good functioning of the application, SatCatcher will need the camera, compass, gyroscope, accelerometer and the GPS of your smartphone. tips: - If your smartphone does not have GPS, you can manually move the "marker" on the card until it points your exact location. Use zoom for more detail. - The compass is very important to adjust your dish, but if your smartphone does not have one, you can still use the application. In this case, it will help you to find clues and marks on the map from your location. It also allows you to calculate the orientation. Than you can use a manual compass to get a good orientation. - Do not hesitate to recalibrate the compass and avoid too close to the antenna arm, because it is sensitive to metallic elements. Try to place your smartphone where there is less magnetic interference. SatCatcher Free is the lite version of SatCatcher. Augmented reality and compass orientation are only available in the full version here: https://appsto.re/fr/Gb6Hbb.i Contact : infosoftycontactfree@gmail.com