M32 vs dLive OneMix

M32-Mix for MIDAS M32 Digital Mixing Console M32-MIX remote control and offline editing software provides comprehensive control over all mixing and routing functions of your MIDAS M32 consoles right from the convenience of your iPad®. From on-stage monitoring sound checks, preamp and channel processing control, to editing the console's onboard effects racks, the M32-MIX app allows the operator to control the M32 with unlimited flexibility and ease of use. M32-MIX gives you the freedom to move about the venue, in order to achieve the maximum performance of your system. Just connect the iPad to your wireless network and assign a static IP address to all consoles wired to that network. The M32-MIX app will connect to that IP address showing the type of console while connecting. No additional hardware, no computer and all extremely easy. M32-MIX unleashes an abundance of remote functionality for the MIDAS M32 series of digital mixing consoles. KEY FEATURES * Control over Input Levels, incl. Preamp Gain, Low Cut, Phase, Phantom Power * Configure the LCD Scribble Strips, incl. colors, icons and names * EQ-curve control for fine-tuning the equalisation from anywhere in the room * Real Time Analyser when editing EQ * Metering overviews with all levels at a glance * Individual input channel Sends to all buses * Sends on Faders feature for rapid stage monitoring setup from your iPad * Detailed editing of channel preamp, gate, dynamics, equaliser, bus sends and LCD scribble strips * Complete editing of M32 onboard effects rack * Scene management and control functions * Routing to Behringer ULTRANET P16 personal monitoring system * 6 aux, 2 USB recorder and 8 effects returns levels * 16 aux bus, 6 Matrix, Master LCR and 8 DCA levels * Mute lock-out feature prevents accidental muting * Connect multiple iPads® simultaneously REQUIREMENTS * Requires a wireless router connected to the M32 * M32-Mix 3.1 requires M32 console firmware V2.16 or higher to be installed on the console

OneMix is a cut down version of the dLive MixPad app that locks control to a single Aux (monitor) mix. Multiple iPads may be set up by the 'Admin' user to give each musician customised personal monitor control via Wi-Fi connection to the dLive mixing system without the risk of affecting the other monitors or FOH main mix. dLive OneMix can be configured to provide as much or as little control as needed. Logon as a User provides personal control of: - One monitor (Aux) level and mute - Monitor PEQ, NEQ and Comp if enabled - Send levels and stereo pan to the monitor - Send Mute, Gate, PEQ, Comp if enabled Logon as Admin allows custom setup: - Set a OneMix session name to identify the user - Choose an Aux (monitor) mix - Assign a 'My Mix' layer and up to 3 custom layers - Assign up to 8 strips on My Mix layer, 32 on custom layers - Assign sends - Inputs, FX returns, Groups - Assign DCAs - Assign blank spaces in layers - Name each layer - Enable or disable channel processing and mutes or assigns per layer Requirements An Allen & Heath dLive mixing system with a suitable wireless router or access point connected to one of its Network ports. This version of OneMix can connect to a dLive mixing system running: - dLive Firmware V2.10 or subsequent V2.1x maintenance releases. - dLive Firmware V2.00 or subsequent V2.0x maintenance releases, when the Firmware compatibility mode setting is enabled. This can be found in the iOS Settings / dLive OneMix. You will need to shut down (force quit) the app and restart it for changes to take effect.