FORScan Lite vs ClockSync Pro

FORScan Lite application was developed specially for a computer diagnostics of Ford, Mazda, Lincoln and Mercury vehicles. Supported adapters: - OBDLink MX+ (recommended) - vLinker FS Bluetooth (recommended) - vLinker FD BLE (recommended) - other ELM327-compatible WiFi or BLE adapter (not recommended). Attention: this application may not work properly in case of bad quality ELM327 adapter used! Supported cars: - Ford, Lincoln, Mercury models of 1996 - 2022MY (some models of 1994-1995MY are also supported) - Mazda 1996-2022MY. Attention: Mazda 7G models (new Mazda 3, CX-30, MX-30, CX-50 etc) are supported partially or not supported! - Vehicles other than Ford, Mazda, Lincoln, Mercury are not supported! Features: - Analyzing an on-board network configuration of the connected vehicle - Read and reset DTC for all modules - Read sensors and other data (PIDs) from all modules - Execute tests - Execute majority of service functions Note: Configuration and Programming functions, as well as some of service functions, are not available in FORScan Lite.

ClockSync Pro keeps your Bluetooth electronic clock accurate with a simple one-tap time sync. How it works: 1. Open the app and tap "Time Auto-Sync". 2. The app scans for your Bluetooth clock and connects automatically (within a range of about 10 meters / 33 feet). 3. Once connected, it writes your phone's current time to the clock. An "OK" confirmation appears when the sync is complete. 4. If no clock is found within 60 seconds, the app shows "Connection Timeout" with a "Reconnect" button so you can try again. Features: - Simple, guided one-tap syncing — no technical skills needed. - Private by design: no account, no sign-in, and no personal data is collected or shared. - Bluetooth connection only. Please note: Bluetooth must be enabled on your phone, and the clock should be kept nearby during syncing.