Hearing Analyzer Portrait vs FullScale Hearing Test

"Hearing Analyzer Portrait" is a hearing health check tool that allows you to measure your hearing over a very wide range of audible frequencies. The human ear possesses an auditory range from 20Hz to 20kHz. However, conventional hearing tests (125 Hz to 8 kHz) cannot assess the low-frequency or high-frequency bands. This app covers nearly the entire audible range, allowing you to self-diagnose your hearing ability. By measuring your current hearing characteristics, try to consider the wellness of your ears and the way of natural sound reproduction. This app employs an intuitive and simple testing method, enabling hearing characteristics to be measured in a very short time. It performs hearing tests within the audible range by detecting the minimum volume setting at which pure tones can be heard. Recommended to check your own hearing ability on a daily basis for the audiophile, music players, sound professionals and all music lovers. See if you have golden ears! Features: - Broadband hearing test in 3 frequency bands: LF (Low Frequency) - 30Hz to 100Hz, STD (Standard Frequency) - 125Hz to 12kHz, HF(High Frequency) - 13kHz to 20kHz - Test tones of LF: 30, 40, 50, 60, 70, 80, 90, 100 (Hz) - Test tones of STD: 125, 250, 500, 1k, 2k, 4k, 8k, 12k (Hz) - Test tones of HF: 13k, 14k, 15k,16k, 17k, 18k, 19k, 20k (Hz) - Test channel: Left, Right - Test tone type: Intermittent tone (Tone A) / Continuous tone (Tone B) - Measurement result graph display (Level/Ath/Both): Linear level without ATH compensation (Level), ATH compensation (Ath)[*1], Both results (Both) - Clear setting and results. (Reset) - Snapshot of single band result. (Snap) - Snapshot of full band result. (Snap-W) *1: ATH (Absolute Threshold of Hearing) ATH is also known as the hearing threshold and is the minimum sound pressure level of pure tone that can be detected on the hearing in noise-free environment. Human is said to be able to listen from 20Hz to 20kHz, but the sensitivity of the hearing will vary greatly depending on frequency. ATH varies with age and sex, but is a good sensitivity at mid-range (1kHz - 5kHz), and needs more greater sound pressure level at a lower and higher frequency. In the LF and HF frequency bands, the information in the ATH graph is for reference only. Note: - This app does not support all wireless headphones and only supports Bluetooth (A2DP) headphones. If you cannot confirm the connection, use wired headphones. AirPods products are not support due to specialized digital signal processing performed internally. - This app generates a test tone signal with a high gain, so please special attention to the volume adjustment. - Before the diagnosis start, please set the hardware volume control to the central position of 50%. If you move the volume slider upward, the output volume will have a large gain. So as not to be excessively large gain for your ears, please adjust it carefully.  - The classification of the hearing ability refers to WHO. Remarks: In general, a high risk of hearing loss has been known if you continue to hear the sounds of a high acoustic pressure level, such as, listening of the portable audio and working with too loud noises. We hope that you will continue to take an interest in your hearing health on a daily basis through this app. If you feel the need to manage the health of your ear, it is recommended that you see a medical professional. Disclaimer: This app is not intended to be used for a medical purpose. This app is not intended to diagnose, prevent, monitor, treat, alleviate or compensate a disease, an injury, a disability or a handicap. If you think you have hearing problems, please consult with your doctor, or other qualified healthcare professional. Please use this app at your own risk. TOON,LLC don't take any responsibility for direct or indirect damage that could result from its use. Please visit our support site for more information.

A MUSIC-CENTRIC HEARING TEST Conventional hearing tests are built around speech. They check eight frequencies and stop at 8 kHz, because that band is where conversation lives. Music doesn't stop there, and neither do we. FullScale maps your hearing from 125 Hz to 20 kHz at up to 37 frequencies per ear, in about eight minutes. Our proprietary calibration keeps that measurement accurate across a growing list of headphones and earbuds. CORE FEATURES • Pick your resolution: 16-frequency core test, or up to 37 frequencies with psychoacoustic models • Four testing speeds to fit your schedule • Three scientific models (Audiometric, Bark, ERB) • Calibrated for a growing list of headphones and earbuds • Simple guided interface with clear visual results • Unlimited retests YOUR RESULTS • Full-spectrum curve compared against a normal-hearing reference • Traditional 4-point PTA for quick reference • Speech-region results in implied dB HL alongside standard dB • Clear interpretation, compatible with a traditional audiogram • No paywall on your own hearing data HEAR THE DIFFERENCE IMMEDIATELY When the test ends, FullScale builds a hearing-correction preset from your results, and you compare it against the original back to back, on the spot. Most people hear it in the first few seconds. Signed-in tests include 3 ARIA AI credits, enough to generate and audition an AI-refined preset. Additional credits are available if you test repeatedly or want to explore more presets, and credits carry across all Altitude apps. KEEP YOUR CORRECTION WITH ARIA ONE Sign in for your test and your profile follows you into ARIA ONE, our hearing-correction app. • No charge on mobile • Mac and Windows run a free tier, with a 30-day trial of the full feature set Finish the test, install ARIA ONE, and your hearing correction is set up and running. YOUR DATA Your hearing data is encrypted, exportable, and yours to delete. We don't sell it and we don't share it without your direct consent. WORKS WITH OVER 5,000 HEADPHONES AND EARBUDS Put on whatever you already own and start. The app handles the rest. • Preferred devices: 18 models we measured and calibrated ourselves, for the tightest high-frequency accuracy • Community database: thousands more headphones and earbuds from the AutoEq project, searchable in the app • Generic: don't see yours, or don't know the model? Choose generic and test anyway. You still get a full-spectrum profile. Our preferred devices: • Anker Soundcore Liberty 3 Pro • Apple AirPods® Generation 3 • Apple AirPods Pro® Generation 1 • Apple AirPods Pro® Generation 2 • Apple AirPods Max® • Beats Studio 3 • Jabra Elite 7 Pro • Kef Mu3 • Moondrop Alice • Sennheiser Momentum True Wireless 2 • Sennheiser Momentum True Wireless 3 • Sennheiser Momentum 4 • Sony WF-1000XM4 • Sony WF-1000XM5 • Sony WH-1000XM5 • Technics AZ60 • Technics AZ80 • Technics AZ100 NOTICE FullScale is not designed or intended as a diagnostic or treatment tool for any medical condition, disease, injury, handicap, or disability, and should not be relied on for self-management of health issues. For any hearing-related concern, consult a medical doctor or qualified health professional. FullScale can be used to improve sound personalization, or as a preparatory step before seeing a provider.