Photophore Synth vs Phosphor 3
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Photophore Synth
This app uses a unique flock synthesis engine with up to 100 sound generators to create rich, organic synthesizer sounds. Control flock behavior to generate diverse timbres, from choirs to insect swarms. Interact by swiping the screen for pitch modulation and chaotic effects.
- Unique flock synthesis engine
- Up to 100 oscillators per patch
- Polyphonic and monophonic modes
- 12 oscillator waveforms
- Low pass/High pass filter with resonance
- Stereo echo effect
- Arpeggiator
Read full descriptionHide full description
"The visual interface will draw people in initially, but the wildly diverse sounds you can tease from Photophore will undoubtedly keep you coming back for more." FACT Magazine -- The Ten Best Synths for iPad | factmag.com Photophore is a unique instrument that uses flocks of up to 100 sound generators to create rich, organic synthesizer sounds. By controlling the behavior of the flocks you can make Photophore sound like a choir of synthesizers or, at more extreme settings, a swarm of angry insects. Unlike other digital synthesizers, Photophore creates warmth and character in a completely new way. Instead of modeling analog circuits, it models animal behavior. Photophore’s sound engine is made up of flocks of oscillators that move through a virtual three-dimensional environment. Their motion is controlled by a special behavioral algorithm and physics simulation that keeps the oscillators in tune with each other, but allows for a certain amount of natural drifting and detuning. This creates rich timbres that are perfect for crafting massive bass sounds, complex pads and searing leads. You can interact with the oscillator flocks by controlling their behavior – how much they try to flock together, how much they avoid each other, their speed, and how much turbulence is in their environment. Oscillators will flee from your touch, so you can create extreme pitch modulation and more chaotic effects by simply swiping across the screen. Key Features: • Unique flock synthesis engine • Up to 100 oscillators per patch • Polyphonic operation (up to 6 voices) • Monophonic mode with glide and legato • 12 oscillator waveforms (saw, square, pulse, sine and more) • Low pass/High pass filter with resonance • Dedicated amplitude and filter envelopes • Stereo echo effect • Arpeggiator Connectivity: • Connect any iPad-compatible MIDI keyboard to play notes and perform pitch bends • Use a MIDI controller's modulation wheel to control the flock • AudioBus and Inter-App Audio support for streaming audio to other apps • Control Photophore from other apps via CoreMIDI Tech Requirements: • iOS7 or later required • iPad 2 or later required What Reviewers say: "The sounds in Photophore are big. There is a surprising range, as well. My first impression was that it was going to be very ambient-based, but you can get gritty and dirty here as well. From the beautifully minimal look to the impressive sounds, Photophore is a winner." - iOS Mars | iosmars.com "There is a lot to like about Photophore. The synth engine is clearly ‘different’ from anything else out there but it is presented in away that is both accessible and visually appealing. In terms of both features and sound, Photophore punches well above its price point." - Music App Blog | musicappblog.com
Phosphor 3
This app recreates a vintage digital synthesizer, offering a faithful emulation of a classic sound engine. It includes modern features like MPE, extensive modulation, and a new UI for sonic exploration.
- Vintage digital synthesizer emulation
- Additive synthesis engine
- MPE support
- Extensive modulation routing
- Preset manager
- Tuning tables
Read full descriptionHide full description
Glow in the dark synthesis. Phosphor 3 is a dual-oscillator additive synthesizer that puts the raw building blocks of sound at your fingertips. Draw, randomize, or select up to 64 harmonics per oscillator, then shape them with envelopes, LFOs, cross-modulation, and a flexible mod matrix. Originally inspired by the alphaSyntauri, a rare digital additive synth from the early 1980s, Phosphor 3 takes that concept far beyond its origins with modern MPE expression, polyphonic modulation, and a full effects engine. --- Additive Oscillators Two identical additive oscillators, each with up to 64 individually editable harmonics. Start from classic shapes: sawtooth, triangle, square, or draw your own harmonic spectrum directly in the partial editor. The intelligent randomizer generates musically useful timbres with variable rolloff, density, and formant peaks, so every click produces something worth exploring. Choose 16, 32, or 64 partials per oscillator to balance complexity against CPU. Each oscillator has independent level, pan, transpose, fine tune, a noise generator with lo-fi downsampling, and cross-modulation (FM) for pushing timbres into harsher, more complex territory. Modulation Two ADSR envelopes with adjustable attack, decay, and release curves. Two LFOs with four waveforms (pulse, sine, saw, random), tempo sync, and the option to run polyphonically, a separate LFO per voice, or globally. An 8-source modulation matrix routes velocity, pressure, pitch bend, mod wheel, CC 74, triggered random, and both LFOs to destinations across the oscillators and effects. Effects Stereo delay with independent left/right time, feedback, and cross-channel feedback for ping-pong and rhythmic patterns. Tempo sync locks delay times to your DAW. Dual band-pass filters after the delay let you carve the wet signal into resonant, frequency-specific textures. Expression Full MPE support with per-note pitch bend, pressure, and slide across 16 polyphonic voices. Mono legato and mono retrigger modes with adjustable portamento. Unison mode for thick, detuned stacks. A scrollable 128-key on-screen keyboard with velocity from touch position, pitch bend from horizontal drag, and channel pressure from vertical drag, no hardware controller required. Tuning MTS-ESP client support for real-time microtuning from any MTS-ESP master. TUN file import for custom scales. Standard 12-TET with adjustable A4 reference. Supports AUv3 for use in GarageBand, AUM, Cubasis, and other AUv3-compatible hosts.
Verdict
The clearest difference is update cadence: Photophore Synth at every 2 months against Phosphor 3's every 11 months. Photophore Synth also leads on price ($0.99 vs $2.99) and ratings volume (28 vs 9). On rating, review sentiment, ads and in-app purchases there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Photophore Synth costs $0.99 and Phosphor 3 $2.99 up front. Neither carries in-app purchases, so what you see is what you pay.
On the App Store both sit at effectively the same score — 4.5 for Photophore Synth against 4.7 for Phosphor 3. Both are backed by a comparable volume of ratings — 28 and 9 respectively. Written reviews are what separate them: 80% of Photophore Synth's written reviews are positive against 79% of Phosphor 3's.
Photophore Synth ships an update every 2 months, Phosphor 3 every 11 months. The most recent releases landed on November 16, 2026 and November 11, 2026 respectively.
| Parameter | Photophore Synth | Phosphor 3 |
|---|---|---|
| Price | $0.99 — better | $2.99 |
| Rating | 4.5 (28 ratings) | 4.7 (9 ratings) — better |
| Positive reviews | 80.3% of reviews — better | 78.6% of reviews |
| Number of ratings | 28 — better | 9 |
| Update frequency | Every 2 months — better | Every 11 months |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Paid | Paid |
| Devices | iPad | iPad |
| Requires iOS | 9.0 — better | 12.0 |
| Further details — not scored | ||
| Size | 11 MB | 27 MB |
| Age rating | 4+ | 4+ |
| Developer | Taika Systems LLC | Audio Damage, Inc. |
Customer experience
Photophore Synth
Phosphor 3
Bugs and requests
Photophore Synth
Reported bugs
6 issues- Doesn't show in Cubasis 3 under audiobus or inter-app
- Receives MIDI on all channels even when selecting a specific channel (iOS 14.4)
- Dies when screen sleeps even with 'Run in background' checked
- Keyboard is an afterthought
- App frozen on welcome page (iOS 7)
Show 1 moreShow fewer
- Won't play any sound
Requested features
20 requests- AUv3 support
- MIDI out
- Ableton Link
- More presets and synths
- Update for newer screen sizes
Show 15 moreShow fewer
- Multi-octave keyboard
- More time-domain variable controls
- Chordion compatibility
- Midi Learn function
- Arpeggiator sync to external time clocks
- Swarmatron type mode with legato bend
- More waveforms
- Ability to draw own waveform
- LFO modulation
- More filter choices
- More randomization with controls
- Volume modulation/trem per voice (flock)
- Rename patches
- In-app record/save/export
- iPhone version
Phosphor 3
Not enough reviews yet to summarise bugs or requests.
In-app purchases
Photophore Synth
No in-app purchases
Phosphor 3
No in-app purchases








