ComfortTouch 1.1 vs NEXENTRO Config

Install the KNX operating functions of your ComfortTouch on your iOS device! Switch or dim the lights, operate your blinds, operate your heating/cooling or switch scenes from a combination of the listed functions - everything remote-controlled via the ComfortTouch App. Please note that only the new ComfortTouch 9/12.1 (with firmware version 1.1 or higher) can be remote controlled in combination with the App. There is the option of programming several ComfortTouch® devices. The ComfortTouch App can be freely configured. This allows you to integrate your own room images for example. Information on how to configure your ComfortTouch App is available at: http://www.busch-jaeger-catalogue.com/8136-0-0024,artikel.html Functions: - Switching - Dimming - Blind - Value transmitter - Scene control - Room temperature control - RGB control

Intelligent living can be that easy – with the NEXENTRO Config App your smart home devices will be configured and linked to other products within a Zigbee network in just a few steps. Main features at a glance: • Simple commissioning of NEXENTRO products via Bluetooth • High flexibility thanks to user specific settings for e. g. minimum brightness, switch-on behavior or blind moving time • Quick configuration of inputs • Individual labeling of the NEXENTRO devices for a clear overview • Expansion of functions thanks to continuous firmware updates The NEXENTRO Config App provides configuration of the following products: • NEXENTRO Push-button interface (lighting control, switching, scenes, blind control) • NEXENTRO Universal Dimming actuator (setting of minimum brightness & load type) • NEXENTRO Switch actuator (change operation mode between switch and push-button) • NEXENTRO Blind actuator (adjusting blind- and slat position) • NEXENTRO DALI control unit (setting of minimum brightness & colour temperature) Preconditions: 1. To set up NEXENTRO devices with this app, they must first be paired via Bluetooth. 2. After the devices have been connected to mains, they can be searched and found if they are in radio range. 3. Once they have been found, devices can be added to the list of registered devices. 4. Registered devices can be set up and configured via the App at any time.