Multiple Tone Generator vs SA60

This app generates the audio signal of multiple channels. Supports 6 audio channels by default, upgradeable to 16 via in-app purchase. [ Wave type ] - There are four types of waveform. (Sine, Triangle, Squire, Saw) - It can switch to the four types of each waveform by the wave type button. - It can be set for each channel. - It can change summarizes the waveforms of all channels with the bottom of the button. [ Volume ] - It can adjust the volume of each channel (Input) and change the mixer (Output) of all channels by the volume slider. - It can be set OFF / ON the volume of each channel by mute button. [ Frequency ] - It can set the value of the frequency in 20Hz - 20000Hz. - It can set the frequency value in the software keyboard by tapping the frequency label. - It can set the frequency value at the corresponding slider to the logarithm. - It can set the frequency value of -1 / + 1 octave from the current value by -1/+1 Octave button. - It can adjust the frequency value slightly from the current value by -/+ button. [ Preset ] - It can set the frequency value of Guitar (E A D G B E), 6-string bass (B E A D G C) for Ch 1 ~ 6. Guitar : Ch 1: E ( 82.4 Hz) Ch 2: A (110.0 Hz) Ch 3: D (146.8 Hz) Ch 4: G (196.0 Hz) Ch 5: B (246.9 Hz) Ch 6: E (329.6 Hz) 6-string bass (+ 1 octave) : Ch 1: B ( 61.7 Hz) Ch 2: E ( 82.4 Hz) Ch 3: A (110.0 Hz) Ch 4: D (146.8 Hz) Ch 5: G (196.0 Hz) Ch 6: C (262.0 Hz)

SA60 AUv3 plug-in — comes as time-limited Demo-version for you to try. It gives you 5 minutes of Free play time. (You can reload the SA60 AUv3 plug-in as many times as you want, thereby you get the Demo period again and again.) Unlimited version of SA60 AUv3 plug-in comes as In-App Purchase. Features: • Standalone and AUv3 plug-in; • Stereo (Mono), Mid or Side EQ modes; • Undo/Redo; • A/B comparison; • 2x/4x/8x Upsampling; • Macro controllers; • Built-in Gain Match; • Scalable GUI. Red Rock Sound SA60 real time 1/3 octave Spectrum Analyser combines ease of use, accuracy and versatility in one economical, reliable unit. Interface is modelled on classic DN60 spectrum analyser, originally developed in 1980. Control & Indicator Functions: • DISPLAY LEVELS — Relate to the Reference level, calibration of a display level is read from graticules on the left of the display window; • REFERENCE LEVEL — The absolute level to which display readings are relative, i.e. calibration, is given in dB; • OVERALL LEVEL — Calibration of the overall level is similary derived from graticule to the right of the display. Note: this graticule applies to the overall level only! • AVG/PK — Two leds indicate whether the display is Averaging or Peak-reading; • RESP. — Speed of display response is selectable: «1» — Fast, «2» — Medium, «3» — Slow (shown by three leds); • MODE — Controls the display mode: «L» — Left, «M» — Mid, «R» — Right. EQ302 is a 32 band equaliser offering 12 dB of cut or boost in 1/3 octave steps between the frequencies of 16 Hz and 20 kHz. The graphic equaliser is a vital component in any audio system. The entire signal passes through it and so any limitations imposed by the equaliser will compromise the performance of the whole system. For example, an indifferently designed equaliser may introduce severe phase distortion, noise and other anomalies related to centre frequency accuracy, filter shape and attenuation accuracy which may manifest themselves as an overall deterioration in the perceived sound quality of the system. Clearly, this is an unacceptable state of affairs, but fortunately your choice to utilise a Red Rock Sound EQ302 Graphic Equalizer will eliminate these problems, offering you unprecedented product performance coupled with the highest filter calibration and reliability standards in the industry. To use SA60 as a plug-in, you need an AUv3-compatible host app like GarageBand, Auria, AUM, Cubasis and more — SA60 will appear in the list of Audio Unit extensions for effect plug-ins in the host app.