Clear vs TouchMix

Clear-Com’s Agent-IC mobile app is designed for use with Clear-Com’s intercom systems such as the Eclipse HX Matrix Intercom, Encore Analog Partyline Intercom, and HelixNet Digital Network Partyline System. The virtual intercom control panel operates on all iPhone and iPads and connects from anywhere in the world over 3G, 4G and Wi-Fi/IP networks. Agent-IC delivers the same user experience as traditional intercom key panels. Even on the mobile device, the app is fully featured with Point-to-Point calling, Point-to-Multipoint group calling, Partyline, IFB communications with logic triggering, PTT (Push-to-talk), local cross-point audio level control, and notifications. All communication is encrypted to AES. AGENT-IC HOSTED BY ECLIPSE HX Agent-IC needs the Eclipse HX matrix intercom with virtual panel licenses enabled for operation. Accessing the app requires proper authorization and system pre-configuration from the organization’s system administrator using EHX. Once authentication is complete, authorized users can connect to their host Eclipse HX on iPhone or iPad as long as they are connected over any 3G, 4G and Wi-Fi/IP network. Agent-IC installation is simple. Download and install the app on the mobile device. Enter the passcode provided within EHX and authentication will begin. A unique and secure connection will be established between the device and the host Eclipse HX intercom system. Once verified, the user is ready to communicate with any traditional, IP and Agent-IC users on the host Eclipse HX network. AGENT-IC HOSTED BY LQ IP INTERFACES Alternatively, Agent-IC can directly connect to LQ IP interface devices in order to link to any one of Clear-Com’s partyline systems. By doing so, Partyline users can speak directly to a remote contributor user on Agent-IC. Accessing the app requires proper authorization and system pre-configuration via the LQ Core Configuration Manager (CCM). Once authentication is complete, authorized users can connect to their host Partyline system on an iPhone or iPad as long as they are connected over any 3G, 4G and Wi-Fi/IP network. Agent-IC installation is simple. Download and install the app on the mobile device. Enter the passcode provided within CCM and authentication will begin. A unique and secure connection will be established between the device and the host Partyline intercom system. Once verified, the user is ready to communicate with any traditional intercom user on the Clear-Com network.

TouchMix-30 Control is an app for iPad, iPad mini, iPhone and iPod touch that provides wireless control of QSC TouchMix-30 Pro digital sound reinforcement mixers. The app is not intended to perform any audio mixing or processing tasks on its own. Visit http://www.qsc.com for more information. When run on the iPad and iPad mini, the TouchMix-30 Control app closely follows the operational paradigm of the mixer. The iPad and the mixer GUI operate independently so it is possible for the iPad to act as an additional user interface that can display and control a set of functions completely different from those being controlled by the mixer’s screen and hardware. An alternate operation mode – Follow Mixer – is also available. With Follow Mixer engaged, the iPad follows the fader selection on the mixer. Touch a fader on the mixer and the iPad will display that channel’s Overview, EQ, Compressor, Sends or Gate screen. Touch a parameter on the iPad and the mixer’s rotary control will adjust it – or just drag on the iPad screen. When used without an actual TouchMix, the app acts as a demonstration of the mixer GUI and functionality. On the iPhone and iPod touch, the TouchMix Control app functions as a personal stage monitor mix control with the option to also remotely operate the mixer’s record and playback features as well as programmable user buttons. To prevent inadvertent adjustment of controls, the mixer operator may allow or restrict access to selected functions on a per-device basis. Features - Input channel processing (4-band PEQ, variable high & low-cut filters, gates, compressor) - Output channel processing (1/3 octave GEQ, 6-band PEQ, delay, variable high & low-cut filters, anti-feedback filters and wizard) - Two Real Time Analyzer (RTA) - Simple or Advanced mixer mode - Displays channel and output level meters - Channel and output levels - Effects and Aux (monitor) send levels - Select input presets from extensive library - Select and control 4 simultaneous effects - Input and output Mutes and Cues - Configure and control DCA and Mute Groups - Multi-track recorder arm, playback and transport - Two 24-channel Auto mixers - Scenes, Snapshots and Cue List Management - Includes TouchMix on-board Info system reference guide. - And more… Requirements - iPad, iPad mini, iPhone, iPod touch running iOS 16.5 or later - QSC TouchMix-30 Pro with version 3.0 or higher firmware installed. - QSC TouchMix-30 Pro connected to a Wi-Fi network (recommended). Visit http://www.qsc.com for more details on Wi-Fi connections. - Note that controlling a mixer with multiple iOS devices running different versions of the app is not recommended. - QSC, LLC Website TouchMix Support Application License Agreement.