LeafSpy Pro vs DT Smart Battery

The Leaf Spy Pro allows anyone with a Nissan Leaf electric vehicle, an iOS 7.1+ device and a supported Bluetooth 4+ LE OBDII adapter (Vgate vLinker FD+ and MC+ OBDII adapters recommended) or a WiFi OBDII adapter, the ability to monitor their battery and other vehicle information normally visible only to the dealer. Support for English, Japanese, German, French, Chinese, Russian and Arabic languages. Note: The iPhone 4 and early iPads (2nd Gen) do NOT support Bluetooth 4+ LE. Currently supports 2011 to 2025 Leaf. (2026 Leaf not yet verified). Information displayed by Leaf Spy Pro: * Voltage of each of the 96 cell pairs (highlighted if shunt active) * Minimum, average, maximum cell pair voltages * Histogram of cell pair voltages * Battery Temperature readings (4 sensors for 2011/12 models, 3 for 2013 models) * Battery AHr rating (this will decease with age and is an indication of remaining capacity) * VIN * Odometer (miles or km) * Number of Quick Charge connections * Number of L1/L2 Charge connections * EVSE Max available amps * EVSE voltage * Battery energy level in GIDs & kWh * Resetable energy usage meter (Wh resolution) * Graphic display of SOC, GIDs and DTE (Distance to Empty) * Remaining distance meter (miles/km) to Event (Low Battery Warning, Very Low Battery Warning or Reserve) based on user selectable energy efficiency * Graphic display of battery temperature with min, avg, max temperatures * Tire Pressure of each of the four tires with low pressure warning and delta pressure warning alarm (not yet supported on 2018 Leaf) * Ambient Temperature * Displays climate control settings and power used. * Trip and Charge Log * Logging function that records most data and optionally GPS location to a csv file that can be easily imported into excel. * Dropbox support to sync Log files * Can run in background while connected to Leaf allowing you to use other apps. LeafSpy Pro also gives you the ability to perform functions normally requiring a visit to the dealer. * Change automatic door lock/unlock settings * Change VSP sound settings on 2013 to 2017 Leaf * Change Dash language on 2011 to 2017 Leaf * Read Diagnostic Trouble Codes (DTC) * Register Tire Positions (required after tire rotation or seasonal tire changes so your Leaf knows the correct location of each tire on the car) * Ability to reset DTCs from selected ECUs (including the DTC set when a different battery pack is installed.) * Special modes when only parts of a Leaf are used in a custom vehicle. Ability to create custom screens by creating a CSV file. See help file for definition format.

The smart battery pack has a built-in remote Bluetooth module, and the APP can read the following information by connecting the APP with the mobile phone through Bluetooth: 1. Working status of battery pack: charging point, discharge, working voltage, current, temperature, residual power, etc.; 2. Overvoltage, undervoltage, overcurrent, overtemperature and other protection information; 3. The number of strings of cells, the voltage and release of each cell; 4. Hardware short circuit and delay, equalization opening voltage; 5. Set the threshold of the remaining power and temperature reminder, and receive a reminder below the value of the fixed threshold;