Pipedata vs Pipe Fitting
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Pipedata
Access dimensional and weight data for over 70 common ASME piping components. Provides information in Metric, US Customary Units, and Inch/Fractions, with audited weights for valves, flanges, and other parts. Ensures accuracy and up-to-date information based on the latest ASME specifications.
- Dimensional data for 72+ ASME piping components
- Weight information for valves and flanges
- Supports Metric, US Customary Units, and Inch/Fractions
- Based on latest ASME piping specifications
- Fast and convenient interface
Read full descriptionHide full description
Pipedata has dimensional and weight information for 72 common ASME piping components all in a fast, convenient and easy to use interface. The Pipedata name has been around since 1996, when it was first applied to Pipedata-Pro. Since then it's gained a global presence in the piping industry with large corporations and individuals appreciating the Pipedata hallmarks of accuracy and up-to date relevant information. Based on the latest ASME piping dimensional specifications it shows Metric, US Customary Units and Inch/Fractions and includes audited valve weights, flange weights and all piping component weights. This release is not limited to but includes the following range of information: DATA SUMMARY Pipe ASME B36.10M/19M - 2004 WeldNeck Flange, ASME B16.5-2013 Slip On Flange, ASME B16.5-2013 Blind Flange, ASME B16.5-2013 Threaded Flange, ASME B16.5-2013 SocketWelded Flange, ASME B16.5-2013 Lapped Flange, ASME B16.5-2013 Long Welding Neck Flange, ASME B16.5-2013 Buttwelded 45deg Elbow, ASME B16.9-2007 Buttwelded 90deg Long Radius Elbow, ASME B16.9-2007 Buttwelded 180deg Long Radius Return, ASME B16.9-2007 Buttwelded 90deg Short Radius Elbow, ASME B16.9-2007 Buttwelded 180deg Short Radius Return, ASME B16.9-2007 Buttwelded Equal Tee, ASME B16.9-2007 Buttwelded Reducing Tee, ASME B16.9-2007 Buttwelded Cap, ASME B16.9-2007 Buttwelded Concentric Reducer, ASME B16.9-2007 Buttwelded Eccentric Reducer, ASME B16.9-2007 Buttwelded Lap Joint Stub End, ASME B16.9-2007 Threaded 90deg Elbow, ASME B16.11-2011 Threaded Tee, ASME B16.11-2011 Threaded Cross, ASME B16.11-2011 Threaded 45deg Elbow, ASME B16.11-2011 Threaded 90deg Street Elbow, ASME B16.11-2011 Threaded Coupling, ASME B16.11-2011 Threaded Half Coupling, ASME B16.11-2011 Threaded Cap, ASME B16.11-2011 Threaded Square Head Plug, ASME B16.11-2011 Threaded Hex Head Plug, ASME B16.11-2011 Threaded Round Head Plug, ASME B16.11-2011 Threaded Hex Head Bushing, ASME B16.11-2011 Threaded Flush Bushing, ASME B16.11-2011 Socketwelded 90deg Deg Elbow, ASME B16.11-2011 Socketwelded 45deg deg Elbow, ASME B16.11-2011 Socketwelded Tee, ASME B16.11-2011 Socketwelded Cross, ASME B16.11-2011 Socketwelded Coupling, ASME B16.11-2011 Socketwelded Half Coupling, ASME B16.11-2011 Socketwelded Cap, ASME B16.11-2011 Socketwelded Reducing Coupling, ASME Unadopted Socketwelded Welding Boss, ASME Unadopted Socketwelded Reducing Insert Type 1, ASME Unadopted Socketwelded Reducing Insert Type 2, ASME Unadopted Socketwelded Reducing Insert Type 3, ASME Unadopted Socketwelded Union, ASME Unadopted Socket Details, ASME B16.11-2011 Non Metallic Flat Ring for ASME B16.5 Flanges, ASME B16.21-2011 Non Metallic Flat Ring for ASME B16.47 Series A Flanges, ASME B16.21-2011 Non Metallic Flat Ring for ASME B16.47 Series B Flanges, ASME B16.21-2011 Spiral wound for ASME B16.5 Flanges, ASME B16.20-2012 Spiral wound for ASME B16.47 Series A Flanges, ASME B16.20-2012 Spiral wound for ASME B16.47 Series B Flanges, ASME B16.20-2012 RTJ Soft Iron Ring type R, ASME B16.20-2012 RTJ Soft Iron Ring RX, ASME B16.20-2012 RTJ Soft Iron Ring BX, ASME B16.20-2012 Flanged Gate Valve, ASME B16.10-2009 Flanged Globe Valve, ASME B16.10-2009 Flanged Ball Valve, ASME B16.10-2009 Flanged Control Valve, ASME B16.10-2009 Flanged Swing Check Valve, ASME B16.10-2009 Flanged Wafer Check Valve, API 594 Wafer type Butterfly Valves, ASME B16.10-2009... and much more: Check it out!
Pipe Fitting
This app calculates various pipe fitting measurements, including offsets, rolling offsets, and elbow cuts. It allows users to input dimensions and angles to determine travel, take-out, and cut lengths, with options for welder's gaps and different elbow types. It also includes a triangle solver and supports multiple units of measurement.
- Offset and rolling offset calculations
- Elbow cut and miter cut functions
- Take-out calculations for various elbow types
- Triangle solver
- Unit conversion (feet/inches/meters)
- Hands-free Siri integration
- Results update in real-time
Read full descriptionHide full description
Pipe Fitting is a pipe fitting calculator for offsets, rolling offsets and elbow cuts. Enter the offset and the fitting angle, and it gives you the travel, the take-out of each elbow and the length to cut, with the welder's gap already allowed for. Example: a 12" offset with two 2" long-radius 45° elbows and a 1/16" gap. The travel is 16.97", each elbow takes out 1.24", and you cut the pipe at 14.36". • Basic offset: any two of run, offset and angle give the travel and the cut length, with or without gaps. • Rolling offset calculator: offset, roll and run (or the angle) give the travel and the cut length. • Parallel offsets: the cutback for pipes running side by side. • Back-to-back elbows: X° + Y° and 90° + X° fittings from a center-to-center distance, with the angle to cut. • Elbow miter cut: cut any angle from a standard 90 and mark it, with the outside (heel), inside (throat) and centerline arcs and the chords. • Take-outs for short-radius, long-radius and 3R elbows, from 1/8" to 48" NPS and DN6 to DN1200. • Triangle solver: any three sides or angles give the rest, plus perimeter and area. • Feet, inches and fractions down to 1/16", or meters, centimeters and millimeters: pick the unit on the keypad. • Results update as you type, and each calculator keeps your last numbers. • Siri: say "Rolling offset with Pipe Fitting" to open it hands-free. • On iPhone and iPad. HOW TO CALCULATE A ROLLING OFFSET True offset = √(offset² + roll²), and travel = √(offset² + roll² + run²). With 45° fittings the run equals the true offset, so the travel is the true offset × 1.414, the 45° offset multiplier. For a 12" offset with an 8" roll: true offset 14.42", travel 20.40". Take off two 1.24" elbows and two 1/16" gaps, and the cut is 17.79". Pipe Fitting does every step for you. Built for pipefitters, steamfitters, pipe welders, plumbers and apprentices, in the shop or on the job site. All seven calculators are free to use with ads; Premium removes them. Made by xNeat, the team behind Calculator+ and Conduit Bending. Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/
Screenshots
Verdict
The clearest difference is in-app purchases: Pipedata at none against Pipe Fitting's 3. Pipedata also leads on ads (none vs shown) and review sentiment (52% vs 33%). Pipe Fitting's advantage is rating (4.7 vs 4.4) and ratings volume (138 vs 44). On price, update cadence and device support there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. Pipe Fitting sells 2 in-app purchases, starting at $4.99 per month. Pipedata asks for nothing beyond the download.
Pipe Fitting holds the better App Store score, 4.7 against 4.4. Both are backed by a comparable volume of ratings — 44 and 138 respectively. Written reviews complicate that: 52% of Pipedata's written reviews are positive against 33% of Pipe Fitting's, so the app with the better star average is not the one people write more warmly about.
Pipedata ships an update every 3 weeks, Pipe Fitting every 2 weeks. The most recent releases landed on November 13, 2026 and November 14, 2026 respectively.
| Parameter | Pipedata | Pipe Fitting |
|---|---|---|
| Price | Free | Free |
| Rating | 4.4 (44 ratings) | 4.7 (138 ratings) — better |
| Positive reviews | 51.7% of reviews — better | 33.3% of reviews |
| Number of ratings | 44 | 138 — better |
| Update frequency | Every 3 weeks | Every 2 weeks — better |
| Ads | No — better | Yes |
| In-app purchases | No — better | Yes |
| Monetization | Free — better | Free with in-app purchases |
| Devices | iPhone, iPad, iPod — better | iPhone, iPad |
| Requires iOS | 11.0 — better | 16.4 |
| Further details — not scored | ||
| Size | 38 MB | 52 MB |
| Age rating | 4+ | 4+ |
| Developer | John Bennett | xNeat.com |
Customer experience
Pipedata
Pipe Fitting
In-app purchases
Pipedata
No in-app purchases
Pipe Fitting
- Pipe Fitting3 Days trial2 variants$4.991 Month
- Pipe Fitting7 Days trial$39.991 Year
Questions
Is Pipedata free?
Is Pipe Fitting free?
Which has better reviews, Pipedata or Pipe Fitting?
Do Pipedata or Pipe Fitting have ads?
Which is updated more often, Pipedata or Pipe Fitting?
Other comparisons















