TSD Rally Split vs Rally Tripmeter

The TSD Rally Split consists of two clocks with different purposes. Master•Time on the left is the rally time-of-day clock. This clock can be adjusted to synchronize with the Official Rally Time clock. Also, the Master•Time clock can be split/stopped by touching the button on the left side. Retouching the button will cause the split time display to disappear. 
Monte•Carlo on the right is a stopwatch with two buttons: one starts and resumes the stopwatch and the other records each lap. When the stopwatch has been stopped, there are three options for resetting it to zero for another start available when you click the Stopwatch Reset Options button below the stopwatch. One option (To Zero Now) is to reset to zero and await pressing the Start button. A second option (Next Minute) is to have the stopwatch reset when the time-of-day clock reaches the next full minute. A third option (Preset Time) allows you to select any time in either minutes:seconds or minutes:cents using the four sets of green or red buttons to increment to the time desired. In order for any of these three options to take affect, you must touch the Apply button on the Stopwatch Reset Options popup. Touching the "Adjust" button opens a popup that allows you to synchronize the Master•Time to the Official Rally Time by making adjustments in increments of +/– 0.1 seconds to account for total errors of as much as + or – 10 seconds. Touch the Lock button to make clock adjustments. Adjust time ahead or behind as needed and, when finished, touch the Unlock button to prevent unintended adjustments. Touch the double Arrows singly or continuously to make adjustments in +/– 0.1 second increments. When unlocked, a chime will sound at 0 seconds and 30 seconds. This audible cue is helpful when synching with an Official Clock. When the Official Rally Clock’s second hand reaches zero, the start of a new minute, estimate the error by which your clock is behind or ahead of the Official time and add or subtract 0.1 second increments. On the clockface displays, time can be measured in either seconds or decimal minutes. Additionally, there are two levels of time precision. One displays two digits for seconds or two digits for hundredths of a minute. For more precision, the other measures and displays seconds as two digits plus tenths of a second or three digits for thousandths of a minute. There are three watch face styles: black, yellow, and white.

Rally Tripmeter turns your phone or tablet into a rally trip computer. Built by a rally driver and used on recce, on the road sections and on the stages. WHAT IT DOES • Two independent trips plus stage and section distances, in digits you can read at a glance while driving • Stage timer with average and maximum speed • Regularity / TSD mode: enter the speed chart, record time controls and see live whether you are ahead of or behind the ideal time • Recce mode with speed limits per section and a warning when you exceed them • Liaison mode with a time card: last TC, allowed time, next TC and a countdown to it • Map with route recording and sharing, plus live location sharing for your service crew • Custom layouts: build your own screen from components in your own colours, on phone or tablet • Bluetooth buttons to reset trips without touching the screen • Rally Raid mode with heading • Calibration factor, metric or imperial units, 14 languages FREE AND PRO The basic tripmeter is free with a daily mileage allowance. Pro unlocks every mode and unlimited mileage. Try Pro for free before your next event and cancel anytime. Works without mobile signal, GPS is all it needs. A reliable backup next to a professional rally trip, and the main instrument at club and historic events. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: https://apphero.ee/rallytripmeter/privacy-policy