Comparison

tpMiFi vs PocketCAD

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

tpMiFi

Easily manage your TP-Link Mobile Wi-Fi device from your iPhone. Monitor data usage, battery life, and connected devices. Control network settings, manage files on an SD card, and perform device maintenance tasks.

Highlights
  • Monitor data usage
  • Manage connected devices
  • Control battery life
  • File sharing via SD card
  • Customize wireless settings
  • Firmware upgrades
Features
Read full description

tpMiFi provides the easiest way to manage your TP-Link Mobile Wi-Fi via the connected iPhone. It allows you to manage your Mobile Wi-Fi's data usage, battery life and connected devices with a few taps. tpMiFi management is available only after the iPhone is connected to the Wi-Fi network of TP-Link Mobile Wi-Fi. Disconnected from the MiFi will appear on the interface if the device is not connected to the Mobile Wi-Fi. Login to take fully control of your Mobile Wi-Fi and the login username and password are the same as the administrator username and password of the Mobile Wi-Fi. Features: -Display network status such as carrier information, signal strength and roaming status. -Control data usage such as currently used data and monthly allowance, and adjust used data at your disposal. -Manage connected devices, block the unwelcome device by simply sliding the corresponding entry and tap Block. -Monitor your Mobile Wi-Fi's battery life in real-time and switch it to power saving mode. -Share, download and upload files in the SD card in your Mobile Wi-Fi. -Customize wireless settings such as your Mobile Wi-Fi's SSID and wireless password. -Other functionality including firmware upgrade, power off, reboot, and factory default restore. Compatible List: tpMiFi can be used on the following devices: M7650, M7450, M7350, M7310, M7300, M7200, M7010, M7000

About

PocketCAD

Features
Read full description

PocketCAD opens real CAD files on your phone — STEP, STL, OBJ and FBX — and lets you inspect them properly: orbit and zoom freely, measure between any two points, and snap to a clean view with one tap. Built for engineers, designers and makers who need to check a part away from their desk. OPEN THE FILES YOU ACTUALLY USE • STL and OBJ on every plan • STEP and FBX with CAD Pro • Recent files stay in your library, ready to reopen INSPECT AND MEASURE • Measure the distance between any two points on a model • Metric or imperial units, your choice • See any model's size (width, depth and height) on every plan • Volume of closed meshes, and surface area (CAD Pro) • Lay any face flat on the grid, to see a part the way it sits (CAD Pro) • Shaded and wireframe views • An orientation cube with X, Y and Z axis arrows, Z up as in CAD tools and slicers: tap a face to jump to that view GET A PART READY TO PRINT (CAD Pro) • Overhang view: faces steeper than your support angle show in red, so you can see where supports will go • Printability check: open edges, faces wound the wrong way, separate parts and zero-area triangles • See whether a part fits your printer's bed, as it stands or turned 90° • Set the support angle (45° by default) and your bed size, from presets or your own WORK WITH SEVERAL PARTS (CAD Ultimate) • Open multiple files at once and arrange them automatically • Give each model its own colour, and show or hide it • Export to STL, OBJ, PLY and GLB • Share a scene by QR code — anyone with PocketCAD can scan it and see what you see PRIVATE BY DESIGN Your models stay on your device. There are no accounts and no analytics of our own. The free plan shows ads, which may be personalised; where privacy law requires it, the app asks for your consent first. A file only leaves your phone when you import a STEP file, which is converted on our server and deleted straight away, or when you choose to share a scene, which is kept for 24 hours and then deleted. A NOTE ON ACCURACY Measurements, sizes, volumes and surface areas are taken from the displayed mesh, so they are for reference and estimation. Always confirm critical dimensions in the CAD software the part was designed in. The overhang view and printability check are guidance: your slicer has the final say. PLANS CAD Free — STL and OBJ, distance measurement, model size, files up to 15 MB. Supported by ads. CAD Pro — adds STEP and FBX, volume and surface area, lay-flat, the overhang view and printability check, and files up to 200 MB (STEP up to 16 MB). No ads. CAD Ultimate — adds multiple files, per-model colour, export and QR sharing. No ads. Available in English, Spanish, Portuguese, Italian, German, French and Japanese. SUBSCRIPTIONS CAD Pro and CAD Ultimate are auto-renewable subscriptions, billed monthly or annually. Payment is charged to your Apple ID when you confirm the purchase. A subscription renews automatically unless you cancel it at least 24 hours before the current period ends. You can manage or cancel it in your App Store account settings. Terms of Use (EULA): https://pocketdevelopment.site/terms Privacy Policy: https://pocketdevelopment.site/privacy

Screenshots

tpMiFi4 screens
PocketCAD4 screens

Verdict

The call

The clearest difference is in-app purchases: tpMiFi at none against PocketCAD's 4. tpMiFi also leads on ads (none vs shown) and iOS requirement (13.0 vs 15.1). PocketCAD's advantage is update cadence (fortnightly vs every 4 months). On price and device support there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. PocketCAD sells 4 in-app purchases, starting at $3.99 per month. tpMiFi asks for nothing beyond the download.

UpkeepUpdate frequency

tpMiFi ships an update every 4 months, PocketCAD fortnightly. The most recent releases landed on November 20, 2026 and November 18, 2026 respectively.

Scorecard4 real differences · 6 level
tpMiFi versus PocketCAD: the parameters behind the verdict, then further details
ParametertpMiFiPocketCAD
PriceFreeFree
Rating4.6 (823 ratings) — better—
Positive reviews76.6% of reviews—
Number of ratings823 — better—
Update frequencyEvery 4 monthsFortnightly — better
AdsNo — betterYes
In-app purchasesNo — betterYes
MonetizationFree—
DevicesiPhone, iPad, iPod — betteriPhone, iPod
Requires iOS13.0 — better15.1
Further details — not scored
Size32 MB50 MB
Age rating4+4+
DeveloperTP-Link Systems Inc.Pocket Development LLC

Bugs and requests

tpMiFi

Reported bugs

5 issues
  • SMS inbox not opening
  • Automatic data usage reset during the month
  • Inability to access local network on iPhone 14 Pro Max
  • Messages not displaying correctly in Persian language
  • Slow performance after latest update

Requested features

5 requests
  • Add support for landscape mode
  • Improve SMS handling and notifications
  • Provide more detailed data usage tracking
  • Introduce a dark mode option
  • Allow renaming of connected devices

PocketCAD

Not enough reviews yet to summarise bugs or requests.

In-app purchases

None

tpMiFi

No in-app purchases

4 purchases

PocketCAD

Subscriptions4
  • CAD Pro Monthly$3.991 Month
  • CAD Ultimate Monthly$9.991 Month
  • CAD Pro Annual$19.991 Year
Show 1 more
  • CAD Ultimate Annual$59.991 Year

Questions

Is tpMiFi free?
tpMiFi is free to download, with no in-app purchases.
Is PocketCAD free?
PocketCAD is free to download, with in-app purchases available.
Do tpMiFi or PocketCAD have ads?
PocketCAD shows ads; tpMiFi does not.
Which is updated more often, tpMiFi or PocketCAD?
tpMiFi ships an update every 4 months, and PocketCAD fortnightly. Most recently, tpMiFi was updated on November 20, 2026 and PocketCAD on November 18, 2026.

Other comparisons