WilhelmSK

November 3, 2024

The Watch app has been completely re-written and now supports complications and widgets. Requires watchOS v9. Complications and widgets only work with a Signal K Server. Introducing Widgets! * Widgets are available on * Home Screen, * Lock Screen (including the line obove the time), * StandBy Mode * Today View Shortcuts allowing buttons in Control Center, Automations, Siri Support * Set A Multi Switch (set victron inverter on, charge only, etc) * Flip A Switch (turn a switch on or off) * Toggale A Switch (taggle the switch state) * Launch WilhelmSK * Drop/Set/Raise Anchor * Control a fusion stereo * Send a PUT to any path * Get the value of a path * Control the state and heading of an autopilot, advance waypoint Builtin Siri Commands * "Drop the anchor in WilhelmSK" * "Raise the anchor in WilhelmSK" * "Set the anchor in WilhelmSK" * "Tack to port in WilhelmSK" * "Tack to starboard in WilhelmSK" * "Toggle the [switch displayName] in WilhelmSK" * "Turn the Autipilot Ten Degrees To Port in WilhelmSK" * "Turn the Autipilot One Degree To Starboard in WilhelmSK" You can creat Shortcuts with different names, and you won't have to say "in WilhelmSK" These new features only work with Signal K connections

June 13, 2024

1.16.2: * Fixed when a new gauge is added to a templeate, existing pages don't get updated * Fixed gauges get messed up when deleting a gauge from a template * Added copy selected gauge settings when add a gauge in the template editor 1.16.1: * Removed separate layouts for iPad split view * Fixed make so swipe up/down in a Web Gauge does not switch layouts * Fixed crash with Raymaine MFD when leaving WilhelmSK * Fixed not reconnecting to Raymarine MFD when changing orientation * Fixed layout label stays visible after swipe up/down 1.16.0: * You can now swipe up or down to change layouts * Last layout page is now remembered per layout * Added option to some gauges to clear the display if freshness is old * Added option to set the background color for freshness * Added multiplier config for RPM Gauge * Added options to specify switch orientation * Added options to show Solar, DC Loads on Electrical Overview * Added a fusion mute button to the top of main screen * New freshness location, which is a square. Uses the border color instead of a dot * Added option to hide the value label in Analog and Circle gauges * Added option to hide the title inside of Circle gauges * Added confirmation for setting the anchor alarm from the top bar * Added Custom Themes * Added configuration for border width * Added configuration for border color * Added configuration for border corner radius (this allows for round gauge borders) * Added option to hide the controls on the WebGauge * Fusion font and color can be configured * Fixed not able to silence notifications that have multiple sources * Fixed units labels on Bar and Text gauges are not effected by padding * Spread the main screen anchor button farther away from the menu button * Made gauge padding a percent instead of fixed pixels. Existing gauges with custom padding will remain the same until the padding is changed * Fixed not recognizing some "warning" notifications as warnings * Fixed decimial digits setting ignored in Wind Gauges * Changed default decimal digits for analog wind gauges to 0 * Fixed some Fusion buttons not show showing pre iOS 16 * Make so image gauges are always in the background * Fixed gauge padding ignored for bar gauges * Fixed Electrical Overview frshness red when there are missing fields

June 5, 2024

1.16.1: * Removed separate layouts for iPad split view * Fixed make so swipe up/down in a Web Gauge does not switch layouts * Fixed crash with Raymaine MFD when leaving WilhelmSK * Fixed not reconnecting to Raymarine MFD when changing orientation * Fixed layout label stays visible after swipe up/down 1.16.0: * You can now swipe up or down to change layouts * Last layout page is now remembered per layout * Added option to some gauges to clear the display if freshness is old * Added option to set the background color for freshness * Added multiplier config for RPM Gauge * Added options to specify switch orientation * Added options to show Solar, DC Loads on Electrical Overview * Added a fusion mute button to the top of main screen * New freshness location, which is a square. Uses the border color instead of a dot * Added option to hide the value label in Analog and Circle gauges * Added option to hide the title inside of Circle gauges * Added confirmation for setting the anchor alarm from the top bar * Added Custom Themes * Added configuration for border width * Added configuration for border color * Added configuration for border corner radius (this allows for round gauge borders) * Added option to hide the controls on the WebGauge * Fusion font and color can be configured * Fixed not able to silence notifications that have multiple sources * Fixed units labels on Bar and Text gauges are not effected by padding * Spread the main screen anchor button farther away from the menu button * Made gauge padding a percent instead of fixed pixels. Existing gauges with custom padding will remain the same until the padding is changed * Fixed not recognizing some "warning" notifications as warnings * Fixed decimial digits setting ignored in Wind Gauges * Changed default decimal digits for analog wind gauges to 0 * Fixed some Fusion buttons not show showing pre iOS 16 * Make so image gauges are always in the background * Fixed gauge padding ignored for bar gauges * Fixed Electrical Overview frshness red when there are missing fields

May 20, 2024

* You can now swipe up or down to change layouts * Last layout page is now remembered per layout * Added option to some gauges to clear the display if freshness is old * Added option to set the background color for freshness * Added multiplier config for RPM Gauge * Added options to specify switch orientation * Added options to show Solar, DC Loads on Electrical Overview * Added a fusion mute button to the top of main screen * New freshness location, which is a square. Uses the border color instead of a dot * Added option to hide the value label in Analog and Circle gauges * Added option to hide the title inside of Circle gauges * Added confirmation for setting the anchor alarm from the top bar * Added Custom Themes * Added configuration for border width * Added configuration for border color * Added configuration for border corner radius (this allows for round gauge borders) * Added option to hide the controls on the WebGauge * Fusion font and color can be configured * Fixed not able to silence notifications that have multiple sources * Fixed units labels on Bar and Text gauges are not effected by padding * Spread the main screen anchor button farther away from the menu button * Made gauge padding a percent instead of fixed pixels. Existing gauges with custom padding will remain the same until the padding is changed * Fixed not recognizing some "warning" notifications as warnings * Fixed decimial digits setting ignored in Wind Gauges * Changed default decimal digits for analog wind gauges to 0 * Fixed some Fusion buttons not show showing pre iOS 16 * Make so image gauges are always in the background * Fixed gauge padding ignored for bar gauges * Fixed Electrical Overview frshness red when there are missing fields

September 1, 2023

1.15.0: * Apple Map type, orientatio and zoom can be configured (mainly for AppleTV) * Added suppport for rtsp and ip cameras to AppleTV * Added ability to send pages and templates directly to other devices (you can send your iPad pages to an AppleTV) * Addded auto paging setting to AppleTV * Added theme selection to AppleTV * Added the Electrical Overview and WavyTanks gauges to AppleTV * Automatically reconnect when changing the current connection settings * Venus/VRM * Use the custom device name in paths if available * Allow selection of specific portalIds to get data from VRM * Added setting for track color * Added settings for AWA vector, TWA vector, course vector, and route * Show a messsage if the alarm-silencer plugin is not installed * Added a "Blue" theme * Default color for LED's now comes from the theme * Anchor Alarm position and distance can be edited in map gauges * Added new "Wavy Tank" gauge * LED gauge colors can be configured * Added new "Electrical Overview" gauge. (inspired by Victron) * Added square LED gauges * added a LED Bank gauge * Fixed decimal digitis setting for Wind Gauges is ignored * Fixed display of some gauges in the templates editor * Fixed AppleTV crash when a font is not available * Stability enhancement to code for editing layouts on other devices * Fixed the whole screen not beeing used on AppleTV * Hide the menu/tab bar when not in use on AppleTV * Hide the page indicator on AppleTV * Fixed crash in Layout Editor when there's no connection and a Web gauge * Improved error message when push notifcation enable fails * Fixed freshness indicators when connected directly to Venus/VRM * Fixed crash when tapping on the map in Anchor Alarm * Fixed crash from odd data in Active Captain * Fixed crash with when there are invalid notifications * Fixed issues with automatically detecting and switching to/from dark mode * Fixes for analog gauges when running the iPad version on a mac 1.14.0: * Added the ability to specify the colors for the LED gauge * Use the iOS color picker when available * Enhancements to Victron VRM/Venus OS path selection * Added ability to enter an ip/jhost for the Raymarine MFD view * Added ability to connect directly to an Antisense W2K-1 * Added ability to follow other vessels in the maps * Added ability to switch relays, inverter mode, etc, via Victron VRM * Fixes for displaying data from specific sources * improved connections when the server supports meta deltas * Updated NMEA2000 pgn definitions * Fixed not discovering Victron GX devices newer than the CCGX * Fixed Victron VRM connections failing * Fixed Navionics crash when boat length is null * Fixed not detecting server features properly with signal-server 2.x

August 8, 2023

* Added the ability to specify the colors for the LED gauge * Use the iOS color picker when available * Enhancements to Victron VRM/Venus OS path selection * Added ability to enter an ip/jhost for the Raymarine MFD view * Added ability to connect directly to an Antisense W2K-1 * Added ability to follow other vessels in the maps * Added ability to switch relays, inverter mode, etc, via Victron VRM * Fixes for displaying data from specific sources * improved connections when the server supports meta deltas * Updated NMEA2000 pgn definitions * Fixed not discovering Victron GX devices newer than the CCGX * Fixed Victron VRM connections failing * Fixed Navionics crash when boat length is null * Fixed not detecting server features properly with signal-server 2.x

March 17, 2021

1.13.4: * Show tracks for other vessels using the tracks plugin * Add favorite connections which show at the top. (Long press on the connection in the sidebar menu) * Fixed meta data not getting to the Apple Watch * Fixed Volume gauge not working on the Apple Watch * Fixed font size issues with the multi switch * Get position from Victron GX devices * Show Navionics errors * Digital Yacht RAW support (direct connection to NavLink2, etc) * New Navionics MAPS SDK with SSO * Fixed Fusion control prev/next buttons disabled im some cases * Fixe switch bank labels not showing if title display is off * Make multi switch support non numerical values 1.13.3: * Fixed issues when creating new page templates via the "New Template" button * Fixed not loading meta data with old versions of the server 1.13.2: * Added support for Fusion Stereo AirPlay Source * Added new Generic Time 12 Hour gauge * Fustion Stereo: don't show disabled zones and sources * Added support for Local Push Notifications * Added AWA & GWA gauge * Fixed support for meta deltas * Fixed bad conversion to gallons * Fixed Fusion power button not showing in some cases * Make so the Achor Move button can be seen on a white backgroun * Fixed only two gauges per row in Today Widget * Fixed issues with Watch sometimes not working on iOS14/watchOS7 * Fixed Fusion volume control sized incorrectly on iOS 14 * Fixed "Charging Mode" gauge crash * Fixed Switch Banks blank on initial conection

February 13, 2021

1.13.3: * Fixed issues when creating new page templates via the "New Template" button * Fixed not loading meta data with old versions of the server 1.13.2: * Added support for Fusion Stereo AirPlay Source * Added new Generic Time 12 Hour gauge * Fustion Stereo: don't show disabled zones and sources * Added support for Local Push Notifications * Added AWA & GWA gauge * Fixed support for meta deltas * Fixed bad conversion to gallons * Fixed Fusion power button not showing in some cases * Make so the Achor Move button can be seen on a white backgroun * Fixed only two gauges per row in Today Widget * Fixed issues with Watch sometimes not working on iOS14/watchOS7 * Fixed Fusion volume control sized incorrectly on iOS 14 * Fixed "Charging Mode" gauge crash * Fixed Switch Banks blank on initial conection

December 8, 2020

* Added support for Fusion Stereo AirPlay Source * Added new Generic Time 12 Hour gauge * Fustion Stereo: don't show disabled zones and sources * Added support for Local Push Notifications * Added AWA & GWA gauge * Fixed support for meta deltas * Fixed bad conversion to gallons * Fixed Fusion power button not showing in some cases * Make so the Achor Move button can be seen on a white backgroun * Fixed only two gauges per row in Today Widget * Fixed issues with Watch sometimes not working on iOS14/watchOS7 * Fixed Fusion volume control sized incorrectly on iOS 14 * Fixed "Charging Mode" gauge crash * Fixed Switch Banks blank on initial conection

August 31, 2020

* Fixed crash with gauge options on iOS 12.x * Performance/Battery improvements * Cleanup of GDW/GWA.GWS gauges From 1.30.0: * New circle gauge type * iPad and MacOS Gauge Options now shows the advanced options on the same screen * Added option to lock editing of the gauges * Remember the last viewed page * Added keyboard shortcuts for iOS * Added the ability to share Layouts * Added ability to save Layouts to the server * Added support for temperature sensors from Venus OS * Added touch bar buttons to change the theme (MacOS) * Made some digital gauges able to be analog * Added a zoom button in the advanced analog window * Added option to draw text gauges using zone colors * Added ability to adjust the zones on Analog gauges * Added ability to change fonts for the Battery Overview gauge * Fixed analog gauge drawing when resizing/editing * Fixed issues with viewing map objects on MacOS * Fixed gauge options opening or swipe gestures happening when using buttons and sliders * Fixed wiggly fusion volume slider * Fixed Venus not reconnecting after sleep or connection gets closed (MacOS) * Fixed switches crashing on the Apple Watch * Fixed changing "Label Decimal Digits" also changes "Value Offset" * Fixed share via email on MacOS * Fixed issues connecting when a stored token expires * Fixed the watch not working with the cloud