REALITi

Connections Panel & Facilitator - Added additional menu items to monitor and control within the facilitator screen. This will remotely open the connections panel on monitors. Zoll R - Improved trace options / defaults - PADS as source removed from PACER mode - Added Advisory Function messages - Improvements to SpO2: - Corrected waveform from being flatlined on load - Corrected SimConnect probe connection - Added SpO2 notification messages for connection status - Added SpO2 delays closer to actual device - Fixed elapsed time to reset after turning off - Added Pacer Detect icon - Added Enable / Disable button interactivity for Pacer Detect - Removed other traces in Pacer mode except Trace 2 - Added Alarms' titles SimConnect - Fixed SpO2 display on reconnect with SimConnect on generic monitor - Fixed a bug where SpO2 waveform would not show when probe connected Mindray D3 & Mindray D6 - Fixed language inconsistencies with D3 and D6 Mindray D3, Mindray D6 & Zoll X - Added AED language settings Corpuls 3 - Metronome is now audible when charging - Added timer to remove power off prompt if nothing selected in 10 seconds - Added ability to remove power off prompt when other modes are selected - Fixed power off prompt from getting stuck after restart - Fixed function of cancel button Corpuls 1 - Removed Pleth waveform and replaced with CPR feedback in defib mode - Removed alarm in AED mode Corpuls AED - Fake CPR band Slow/Shallow option is now detected as movement Capnostream 35 - Fixed waveform display Atlas & Atlas Junior - Added battery level and charging indicator for Atlas manikins

Zoll R - Added settings to support 3 leads, filtered ECG, SpO2 and EtCO2 based on settings - Updated labels and layout to support 3 leads - Corrected pacing to single trace - Renamed Leads to ECG - Renamed Filt ECG to FIL - Improvements to display when using Trace 3 with CPR - Modified prompts that were obstructing waveforms - Adjusted pacing output to increments of 2 instead of 5 - Fixed overlap on Trace 3 with Sync on - Corrected sync background colors when defib is on - Improvements to EtCO2: - Added zeroing - Adjusted timers - Added CO2 warm up - Corrected EtCO2 button behaviour - Changed ECG sync symbol from S to triangle - Settings - Added settings for Trace 2 and 3 Zoll X - Correct missing display elements when in high contrast mode Zoll EMV - Enabled two-way control - Tidal volume, Fi02, BPM, and mode changes on the device can now adjust the facilitator Schiller Defigard Touch 7, Schiller Physiogard Touch 7 & Zoll X - Improvements to IBP alarms and timers - Added ability to zero art. line LIFEPAK 15 - Fixed UI glitch that caused a thin line on CO2 tracing Corpuls 3 - Disabled jog dial flash when device is turned off - Improved pie chart on manual defib and AED - Enabled Cancel button after Analyse button is pressed - Improvements to manual defib timer and pie chart - Resolved an issue with waveforms not editable after switching to manual mode Corpuls AED - Fixed an issue with analysis running when not expected. - Updated analysis button LED states to better replicate the device Corpuls 1, Corpuls 3, Corpuls 3T & Corpuls AED - Handled Empty fields in manual mode Facilitator - Fixed missing positions for manual electrode placement on iPad Mini - Resolved an issue with patient weight and temperature not displaying correctly when activating scenarios - Improved Chinese translations SimConnect - Improvements to connection, finger detection and stacked breaths - SimConnect is no longer displayed as a CPR band - Fixed bug that caused ETCO2 to trend to 0 after ventilation - Added ability to change name of SimConnect - Added interface for selecting adult or neonatal flow probe SimConnect & Zoll X - Corrected handling for trace of SpO2 after probe disconnected - Added labels to Zoll X to support SimConnect: - Check sensor - Initializing - Calibrating - Searching - Corrected SpO2 start up behaviour to support integration of SimConnect Settings - Fixed overlapping text in settings drop downs - Resolved an issue where settings were not saved correctly Atlas Junior - Enabled pulse during compressions - Removed unnecessary quotation marks from WiFi config Atlas facilitator - Connections panel: - Updated name to “ATLAS”, previously “ATLAS Senior” - Added ability to see WiFi SSID in connection settings

Bug Fixes Corpuls 1. Resolved AED analysis "hanging" issue when compressions performed in analysis phase 2. Corpuls AED voice prompts corrections done 3. Electrode connector of the C1 now pre-connected 4. Corpuls 3 - SPO2 display on control panel corrected 5. Corpuls 3T – Starting the device now starts with Monitor mode not AED 6. Corpuls 3/3T – ECG trace now showing when activated on Control in manual AED mode Zoll R 1. Device now starts in the user selected mode 2. Pads off/Poor Pad Contact and ECG Lead Off/Poor Lead Contact messages shown only when applicable 3. Monitor Mode - on app start/mode change, the default is now PADS 4. PACER - on mode change, the default is now Lead II. 5. Reset the energy escalation and shocks after turned off Zoll EMV 1. Tidal volume now stays at the value selected when adjusted with the dial General 1. Video Module: Fixed the instance where no blood pressure values were triggered during video recording, yet Blood Pressure was displayed on the final recording 2. When using 12 lead ECG print closing the print on the monitor, also now closes it on the additional monitors. 3. Inability to exit CPR dashboard while using CPR module or Atlas is now fixed. It is brought back when compressions are applied again. 4. Show dash for PR when SpO2 not ready on various screens 5. Issue with connecting multiple CPR sensors at the same time resolved 6. Fixed additional info window not closing for REALITi and corpuls menus 7. Incorrect temperature display in Fahrenheit on control corrected 8. Fixed renaming CPR Band REALITi SimScope: 1. Re-enabled the SimScope auto connect without using connection panel Feature Request 1. Added options for demand and non-demand pacing for Lifepack 15 2. Applied alarm to Pulse Rate when limit is exceeded on various screens

Enhanced SpO2 Controller with Probe On/Off: This new feature adds realism as you control the SpO2 probe placement on a finger with the Probe On/ Off option. - The introduction of the Probe On/Off button allows enhanced realism of a SpO2 probe being placed on a finger - Realistic representation of Probe Off and Pulse search messaging - Realistic representation of SpO2 waveform displayed prior to SpO2 numeric being displayed: - The connections panel on the monitor screen for peripherals such as the CPR module or the Atlas manikin has been redesigned to allow for easier connections General improvements: The connections panel on the monitor screen for peripherals such as the CPR module or the Atlas manikin has been redesigned to allow for easier connections Propaq M and MD: - TBI is now enabled Corpuls: - Metronome can now be switched on or off - Fixed bug with ETCO2 alarm limits displayed in kPa or mmHg - Fixed bug in C3T when pressing Manual button, AED starts Mindary D3 /D6: - Mindray D3 - Fixed alarm sounding after etco2/rr is set to hide on control - Mindray D3 - NIBP button now works. - Mindray D6 - Fixed alarm sounding after CVP and ART line are set to hide or remove in control - Mindray D6/D3 - Fixed waveforms not repositioning after connection status updates - Fixed lab values will not display decimal points when displayed on the monitor - Control Ventilator Tab‘s Titles overlaps menu fixed

- Corpuls C3/3T - automatic AED analysis - Corpuls C3/3T - multiple options for 4 numeric display - Bug fixes and performance improvements.