1.13
October 2, 2023
1. Push Notifications a. Alerts that are sent to the user’s phone to stay up to date on the latest products, features, etc.
1.12
April 28, 2023
ONE Version 74 Firmware Release Notes: 1. Firmware Update a. When a firmware update is available press the CENTER and UP buttons at the same time. The LED indicator will turn dark blue. Use the Darklab application to select the latest firmware update.
More1.11
March 3, 2023
PB2.0 + Version 1 Firmware Release Notes: 1. Menu: a. E-Give i. Levels 1-3 b. Killswitch Compatibility i. Connect or disconnect Killswitch. ii. Must tap Killswitch atleast 3 times. c. Timer i. 0-24 hours. d. Display Mode i. Hertz or Volts. e. Voltage Setup i. Increments of 0.1 Volts or 0.5 Volts f. Screen Orientation i. Left screen or right screen. g. Shipping Mode i. Cancel ii. Off PB2.0 Version 2 Firmware Release Notes: 1. Darklab iOS Application: a. When changing the resolution within the iOS application, the motor will not turn on unless the Center/Power button is pressed. 2. Menu: a. User can now hold down Center button to open built-in menu and use the Up & Down buttons to navigate the menu options more easily. Press the Center button again on desired setting. Previously the center button needed to be held down continuously. 3. Killswitch: a. When connecting the Killswitch via the battery or iOS application, the customer must tap Killswitch 3 times and wait for the “Connected” message to show on the battery’s display screen to confirm that the connection was successful.
More1.10
October 25, 2022
● Bellar Air ○ Voice Control via Siri ○ Voltage Adjustment ○ Power ON/OFF ○ Control eGive ○ Check Battery Life ○ Update Firmware
More1.9
June 27, 2022
● PowerBolt II ○ Voice Control via Siri ○ Speed Adjustment ○ Power ON/OFF ○ Control eGive ○ Check Battery Life ○ Update Firmware ● LightningBolt 3.5 ○ Voice Control via Siri ○ Speed Adjustment ○ Power ON/OFF ○ Control eGive ○ Check Battery Life ○ Update Firmware
More1.8
April 13, 2022
1. Hover a. KillSwitch connectivity i. Allows to synchronize or de-synchronize the KillSwitch which allows to turn on and off the power supply. Note: The pedal and KillSwitch cannot be used at the same time. Once the app has been updated, it is required that all users update their devices to the latest version of Firmware for proper connectivity, device communication, and functionality. Users do not have the ability to use the upgraded technology Firmware with past versions of the app that do not have the necessary, up-to-date technology support.
More1.7
March 1, 2022
● PowerBolt + ○ Voice Control via Siri ○ Voltage Adjustment ○ Power ON/OFF ○ Control eGive ○ Check Battery Life ○ Update Firmware ● Killswitch ○ Update Firmware ● Settings Screen: 1. Resolution a. Allows adjustment to voltage precision in increments of 0.1 volts or 0.5 volts. 2. Automatic LED Fading a. Fades the light of the LED brightness automatically, from high to low. 3. Manual LED Dimmer a. Allows dimming of LED brightness with a slider, from high to low or vice versa. 4. KillSwitch a. Allows to synchronize* or de-synchronize* the KillSwitch(s) that are seen in the Devices page.
More1.6
December 13, 2021
1. Models and firmware supported by this version: a. AirBolt i. Firmware version 71 b. AirBolt Mini i. Firmware version 71 c. Hover i. Firmware version 56 2. Hover a. Improved update speed. b. Improved system stability.
More1.5
October 14, 2021
1. Power Control Panel: a. Under the control buttons, the battery icon will now show a lightning bolt symbol to display its charge level while the device is being charged. 2. Models and firmware supported by this version: a. LightningBolt Uni i. Firmware version 63 (upgrade only) and 71. b. LightningBolt i. Firmware version 63 (upgrade only), 68-71. c. PowerBolt (upgrade only) i. Firmware version 63-71. d. Hover i. Firmware version 55 and 56 (future firmware upgrade)
More1.4
September 1, 2021
1. Device Screen: a. Devices are now sorted by signal strength priority. i. A signal strength status icon will show now on each device. b. When pressing and holding a device icon, a new pop-up menu will enable the following options: i. Rename device. ii. Siri priority (This option excludes the PowerBolt). 1. When enabled, Siri will control the prioritized device. iii. Remove device. 1. Will eliminate device from device list. 2 . Help Menu: a. A new button will link to Darklab’s FAQ webpage to learn more about each device 3. Power Control Panel: a. Button’s animation of selected device will now animate if any of the keys in the physical device are pressed. 4. Firmware Screen: a. The current installed version is now displayed above the update button. b. Under firmware icon, a new update notification will be displayed anytime a new firmware is available. c. If an error occurs during an update, a code will be displayed for technical support reference.
MoreYes, Darklab is compatible with iPad devices.
Darklab was created by DARKLAB TATTOO SUPPLY COMPANY LLC.
The Darklab app requires iOS 13.4 or later.
The overall user rating of Darklab is 2.0.
The Main Genre Of The Darklab App Is Productivity.
1.13 is the current version of Darklab.
Darklab rolled out its latest update on October 1, 2024.
Darklab originally came out on February 5, 2023.
Darklab is suitable for children aged DARKLAB TATTOO SUPPLY COMPANY LLC.
Darklab is available in English.
No, Darklab is not featured on Apple Arcade.
No, Darklab does not include options for in-app purchases.
No, you cannot use Darklab with Apple Vision Pro.
No, you can not expect ads while using Darklab.
