Mackie Master Fader 3

October 13, 2015

This app has been updated by Apple to display the Apple Watch app icon. ***Master Fader 4 is now available. Please search the App Store and update to Master Fader 4 for the latest features and bug fixes. Master Fader 3.2.3 is no longer supported and remains available for compatibility only.*** Be sure to perform a full System Backup of Master Fader before updating the app from the Tools>Settings view. After updating the app, the mixer firmware may also need to be updated. This will happen when you next connect Master Fader to your DL Series mixer. Please ensure you have enough time for both before your next gig. Master Fader 3.2.3 changes the following: • Fixed slow launching of app in iOS9 • Fixed slow changing to Overview in iOS9 • Fixed some text appearance issues in iOS9 Master Fader 3.2.2 changes the following: • Eliminated Crash in iOS9 • Fixed issue with exporting Offline Shows Master Fader 3.2.1 adds the following enhancements and fixed the following bugs: •Added "Retail Mode" Text to Navigation Bar when enabled •Fixed issue where users could only type in an EQ or Compressor gain setting in 3dB increments •Fixed issue where mute and solo state of channels in a view group were not reflected when enabling mute or solo on VCA •Fixed issue where Master Fader could lose communication with DL Hardware when recalling snapshots with multiple iPad connected •Fixed issue where DL32R multichannel record and playback transports controls didn't work properly when HDD first mounted •Fixed issue where IO Patchbay Access Limits didn't function properly on DL1608 or DL806 •Fixed issue where Master Fader could crash when current state is changed while waiting for update yes/no confirmation •Fixed issue where undocking iPad while recording didn't prompt to save recording •Other small fixes

September 16, 2015

Be sure to perform a full System Backup of Master Fader before updating the app from the Tools>Settings view. After updating the app, the mixer firmware may also need to be updated. This will happen when you next connect Master Fader to your DL Series mixer. Please ensure you have enough time for both before your next gig. Master Fader 3.2.2 changes the following: • Eliminated Crash in iOS9 • Fixed issue with exporting Offline Shows Master Fader 3.2.1 adds the following enhancements and fixed the following bugs: •Added "Retail Mode" Text to Navigation Bar when enabled •Fixed issue where users could only type in an EQ or Compressor gain setting in 3dB increments •Fixed issue where mute and solo state of channels in a view group were not reflected when enabling mute or solo on VCA •Fixed issue where Master Fader could lose communication with DL Hardware when recalling snapshots with multiple iPad connected •Fixed issue where DL32R multichannel record and playback transports controls didn't work properly when HDD first mounted •Fixed issue where IO Patchbay Access Limits didn't function properly on DL1608 or DL806 •Fixed issue where Master Fader could crash when current state is changed while waiting for update yes/no confirmation •Fixed issue where undocking iPad while recording didn't prompt to save recording •Other small fixes Master Fader 3.2 adds the following New Features and Enhancements: • The DL32R can now record and playback 32x32 channels to and from the external hard drive. Note DL32R users will NOT be able to downgrade to 3.1 after updating their mixer firmware to 3.2 because of this change to the recording module. • Added new Mic Pre view for DL32R allowing adjustment of all 32 mic pre gains and 48V enables at once. • Enhanced VCA display. • Enhanced Retail Mode with integrated demo videos and auto reset to demo show • Enhanced performance of recalling snapshots • Reduced overall memory usage improving performance, especially for users with large number of shows or shows with lots of images • Added quick select of All or None for access limits • Added Reset Shows and Presets Option to Tools>Settings>System Backup Menu • Airplay can now be used while also using Master Fader • The DL32R USB drive "Refresh" button is now only available when a drive is in the "Ejected" state (enhancement) • Enhanced Mic Pre Gain sliders to accurately convey step value • Moved user file storage to App Group allowing for future enhancements • Switched to the latest iOS8 SDK and building for 64bit Master Fader 3.2 fixed the following bugs: • Fixed issue where channel safes did not protect even numbered aux sends after they were unlinked • Fixed issue where access limiting the even channel of a linked output didn't limit access to the pair • Fixed issue where some Flash drives weren't recognized on the DL32R • Fixed issue where replacing user presets would makes the name and icon disappear • Fixed issue where files could be recorded incorrectly on the DL32R if using a name with a space at the beginning or end • Fixed a variety of issues with popovers showing slowly and the wrong size • Fixed issue where switching between mixer's online and offline states could cause the meters to freeze showing signal when none is present • Fixed issue where the Now Playing icon could appear incorrectly • Fixed issue where the music play once, loop & shuffle icons would flash after an HDD was ejected on the DL32R • Fixed issue with the DL32R where Music and Multitrack file details were not displayed in the tracklist • Fixed issue where refreshing/ejecting the DL32R hard drive with multiple iPad connected could disconnect some of them • Fixed issue where the DL32R recording view would still show the last file played after the drive is ejected • Fixed issue where the DL32R Eject & Format buttons were briefly enabled during playback between playlist songs • Fixed issue where the DL32R Loop Once icon briefly appears enabled when it is actually disabled

July 21, 2015

Be sure to perform a full System Backup of Master Fader before updating the app from the Tools>Settings view. After updating the app, the mixer firmware will also need to be updated. This will happen when you next connect Master Fader to your DL Series mixer. Please ensure you have enough time for both before your next gig. Master Fader 3.2.1 adds the following enhancements and fixed the following bugs: •Added "Retail Mode" Text to Navigation Bar when enabled •Fixed issue where users could only type in an EQ or Compressor gain setting in 3dB increments •Fixed issue where mute and solo state of channels in a view group were not reflected when enabling mute or solo on VCA •Fixed issue where Master Fader could lose communication with DL Hardware when recalling snapshots with multiple iPad connected •Fixed issue where DL32R multichannel record and playback transports controls didn't work properly when HDD first mounted •Fixed issue where IO Patchbay Access Limits didn't function properly on DL1608 or DL806 •Fixed issue where Master Fader could crash when current state is changed while waiting for update yes/no confirmation •Fixed issue where undocking iPad while recording didn't prompt to save recording •Other small fixes Master Fader 3.2 adds the following New Features and Enhancements: • The DL32R can now record and playback 32x32 channels to and from the external hard drive. Note DL32R users will NOT be able to downgrade to 3.1 after updating their mixer firmware to 3.2 because of this change to the recording module. • Added new Mic Pre view for DL32R allowing adjustment of all 32 mic pre gains and 48V enables at once. • Enhanced VCA display. • Enhanced Retail Mode with integrated demo videos and auto reset to demo show • Enhanced performance of recalling snapshots • Reduced overall memory usage improving performance, especially for users with large number of shows or shows with lots of images • Added quick select of All or None for access limits • Added Reset Shows and Presets Option to Tools>Settings>System Backup Menu • Airplay can now be used while also using Master Fader • The DL32R USB drive "Refresh" button is now only available when a drive is in the "Ejected" state (enhancement) • Enhanced Mic Pre Gain sliders to accurately convey step value • Moved user file storage to App Group allowing for future enhancements • Switched to the latest iOS8 SDK and building for 64bit Master Fader 3.2 fixed the following bugs: • Fixed issue where channel safes did not protect even numbered aux sends after they were unlinked • Fixed issue where access limiting the even channel of a linked output didn't limit access to the pair • Fixed issue where some Flash drives weren't recognized on the DL32R • Fixed issue where replacing user presets would makes the name and icon disappear • Fixed issue where files could be recorded incorrectly on the DL32R if using a name with a space at the beginning or end • Fixed a variety of issues with popovers showing slowly and the wrong size • Fixed issue where switching between mixer's online and offline states could cause the meters to freeze showing signal when none is present • Fixed issue where the Now Playing icon could appear incorrectly • Fixed issue where the music play once, loop & shuffle icons would flash after an HDD was ejected on the DL32R • Fixed issue with the DL32R where Music and Multitrack file details were not displayed in the tracklist • Fixed issue where refreshing/ejecting the DL32R hard drive with multiple iPad connected could disconnect some of them • Fixed issue where the DL32R recording view would still show the last file played after the drive is ejected • Fixed issue where the DL32R Eject & Format buttons were briefly enabled during playback between playlist songs • Fixed issue where the DL32R Loop Once icon briefly appears enabled when it is actually disabled

July 1, 2015

Be sure to perform a full System Backup of Master Fader before updating the app from the Tools>Settings view. After updating the app, the mixer firmware will also need to be updated. This will happen when you next connect Master Fader to your DL Series mixer. Please ensure you have enough time for both before your next gig. Master Fader 3.2 adds the following New Features and Enhancements: • The DL32R can now record and playback 32x32 channels to and from the external hard drive. Note DL32R users will NOT be able to downgrade to 3.1 after updating their mixer firmware to 3.2 because of this change to the recording module (But why would you want to?). • Added new Mic Pre view for DL32R allowing adjustment of all 32 mic pre gains and 48V enables at once. • Enhanced VCA display. Now, when a channel is assigned to a VCA, a semi-transparent fader cap is also shown so users can see level changes caused by VCAs on the input channel itself. Additionally, if a VCA is muted or soloed, assigned channels will now show that they are being remotely muted or soloed. • Enhanced Retail Mode with integrated demo videos and auto reset to demo show • Enhanced performance of recalling snapshots • Reduced overall memory usage improving performance, especially for users with large number of shows or shows with lots of images • Added quick select of All or None for access limits • Added Reset Shows and Presets Option to Tools>Settings>System Backup Menu • Airplay can now be used while also using Master Fader • The DL32R USB drive "Refresh" button is now only available when a drive is in the "Ejected" state (enhancement) • Enhanced Mic Pre Gain sliders to accurately convey step value • Moved user file storage to App Group allowing for future enhancements • Switched to the latest iOS8 SDK and building for 64bit Master Fader 3.2 fixed the following bugs: • Fixed issue where channel safes did not protect even numbered aux sends after they were unlinked • Fixed issue where access limiting the even channel of a linked output didn't limit access to the pair • Fixed issue where some Flash drives weren't recognized on the DL32R • Fixed issue where replacing user presets would makes the name and icon disappear • Fixed issue where files could be recorded incorrectly on the DL32R if using a name with a space at the beginning or end • Fixed a variety of issues with popovers showing slowly and the wrong size • Fixed issue where switching between mixer's online and offline states could cause the meters to freeze showing signal when none is present • Fixed issue where the Now Playing icon could appear incorrectly • Fixed issue where the music play once, loop & shuffle icons would flash after an HDD was ejected on the DL32R • Fixed issue with the DL32R where Music and Multitrack file details were not displayed in the tracklist • Fixed issue where refreshing/ejecting the DL32R hard drive with multiple iPad connected could disconnect some of them • Fixed issue where the DL32R recording view would still show the last file played after the drive is ejected • Fixed issue where the DL32R Eject & Format buttons were briefly enabled during playback between playlist songs • Fixed issue where the DL32R Loop Once icon briefly appears enabled when it is actually disabled • Lots of other small fixes

May 6, 2015

Master Fader 3.1.1 fixes a crashing bug when trying to adjust the recording levels for a DL1608 or DL806. Whoops. Master Fader 3.1 adds the following New Features and Enhancements: • DL Dante Expansion Card Support • Mute Group masters are now actionable from the overview • Access Limit buttons were incorrectly Green instead of Red. Duh. • The current parameter readout now shows information when making changes to the IO Patch view • Removed decimal from current parameter readout for Pan and Balance • All radio buttons now activate on release instead of press Master Fader 3.1 fixed the following bugs: • An update to Master Fader v3 from v2.1.1 and below could fail • Crash when Access Limits Input DSP and Input Routing are enabled and then change mixes in the Output Routing Channel View • Crash when switching between a DL32R and DL1608 in a very particular way • Master Fader could be forced offline after an out of range iPad returned into range • When access limited, Masters will still highlight in overview when touched • Aux pan not recalled correctly on power cycle • Access Limiting Mutes incorrectly limited Aux Mutes • QAP would not show all FX muted from Mute Group • Navigating between Matrix, Overview and Masters view could show incorrect views • Navigating between Overview, Subgroup channel, and Mixer view could show incorrect views • Navigating between Overview, VCA channel, and Mixer view could show incorrect views • Linking Unlinking channels will sometimes not be shown on multiple connected iPads • Show note edits sometimes not shown on multiple connected iPads • Output alignment delay wasn't restored upon 2.1.1 to 3.1 update • Toggling Access Limits was very slow • Switching between devices could cause the view and mute group assignment sources to disappear • Faders could disappear from Matrix Mixer View • Long channel names could intermittently not scroll in the Matrix and Masters View • Masters View could show no channel strips • Still able to access the FX Channel View when FX is Access Limited • Channel view meters could stop functioning when switching between view groups • Mute Group assignments that were changed while a Mute Group is enabled wouldn't always update the Overview • Linked subgroups would incorrectly show L/R selector in channel routing view • Monitor Delay on QAP only had the ability to manually enter Meter parameter • When Access Limited Sub Groups could still be assigned to a VCA • Access Limiting Mutes incorrectly limited Aux Mutes • Stereo linked Matrix channel strip would incorrectly appear twice in the Masters View • Leaving a Show's Notes field without updating could cause connected iPads to disconnect • With certain Access Limits enabled, selecting a Sub in the Mix Selector would navigate to the wrong view

April 28, 2015

Master Fader 3.1 adds the following New Features and Enhancements: • DL Dante Expansion Card Support • Mute Group masters are now actionable from the overview • Access Limit buttons were incorrectly Green instead of Red. Duh. • The current parameter readout now shows information when making changes to the IO Patch view • Removed decimal from current parameter readout for Pan and Balance • All radio buttons now activate on release instead of press Master Fader 3.1 fixed the following bugs: • An update to Master Fader v3 from v2.1.1 and below could fail • Crash when Access Limits Input DSP and Input Routing are enabled and then change mixes in the Output Routing Channel View • Crash when switching between a DL32R and DL1608 in a very particular way • Master Fader could be forced offline after an out of range iPad returned into range • When access limited, Masters will still highlight in overview when touched • Aux pan not recalled correctly on power cycle • Access Limiting Mutes incorrectly limited Aux Mutes • QAP would not show all FX muted from Mute Group • Navigating between Matrix, Overview and Masters view could show incorrect views • Navigating between Overview, Subgroup channel, and Mixer view could show incorrect views • Navigating between Overview, VCA channel, and Mixer view could show incorrect views • Linking Unlinking channels will sometimes not be shown on multiple connected iPads • Show note edits sometimes not shown on multiple connected iPads • Output alignment delay wasn't restored upon 2.1.1 to 3.1 update • Toggling Access Limits was very slow • Switching between devices could cause the view and mute group assignment sources to disappear • Faders could disappear from Matrix Mixer View • Long channel names could intermittently not scroll in the Matrix and Masters View • Masters View could show no channel strips • Still able to access the FX Channel View when FX is Access Limited • Channel view meters could stop functioning when switching between view groups • Mute Group assignments that were changed while a Mute Group is enabled wouldn't always update the Overview • Linked subgroups would incorrectly show L/R selector in channel routing view • Monitor Delay on QAP only had the ability to manually enter Meter parameter • When Access Limited Sub Groups could still be assigned to a VCA • Access Limiting Mutes incorrectly limited Aux Mutes • Stereo linked Matrix channel strip would incorrectly appear twice in the Masters View • Leaving a Show's Notes field without updating could cause connected iPads to disconnect • With certain Access Limits enabled, selecting a Sub in the Mix Selector would navigate to the wrong view

February 11, 2015

Changes since v3.0.1 - Enhancement: EQ drawing performance improved, especially on older iPad devices - Enhancement: Updated Device Connection/Recording/Playback/Rude Solo status indication to comply with Apple requirements - Enhancement: Added Access Limit for Tools>Devices tab - Bugfix: Master Fader Crash when recording to drive approaching capacity with DL32R - Bugfix: Master Fader disconnects from mixer when storing snapshot with non default Talkback Routing on DL32R - Bugfix: Master Fader disconnects from mixer when storing snapshot with non default AES Routing on DL32R - Bugfix: Master Fader disconnects from mixer when storing snapshot with non default FX Send colors - Bugfix: View and Mute Group Assignment windows do not populate correctly when switching between DL32R and DL806/DL1608 - Bugfix: Change "Trim" on iPad/Return channels to "Trim L" and "Trim R" - Bugfix: Entering alignment delay feet or ms incorrectly interpreted as meters - Bugfix: When Access Limit > FX enabled, unable to access Input Routing or Input DSP on input channel strips - Bugfix: Mix masters were incorrectly affected by the Mute-access limit - Bugfix: In the QAP the mute button said "Mute 1" when lit when using a DL1608/DL806 - Bugfix: The text in the show button is not visible when show button is touched - Bugfix: Default created and modified date for shows can be strange before a snapshot is stored - Bugfix: Some text problems when operating the iPad in German or Chinese - Bugfix: Default created and modified date for shows can be strange before a snapshot is stored Changes since v3.0 - Bugfix: iPad loses sync when second wireless iPad goes out of range - Bugfix: App crashes when power-up DL32R with incorrectly formatted HDD attached - Bugfix: Long song names for HDD recording on DL32R can cause a crash - Bugfix: Crash when Access Limiting Input DSP and Input Routing and go to Output Routing Channel View - Bugfix: Access Limits can cause some channels to be incorrectly hidden in Masters View - Bugfix: Subs and VCAs cannot be muted on aux with "Use LR Mute" disabled - Bugfix: Sub 6 Missing from VCA Assignment view - Bugfix: None in mute group selector toggle-able when Multi-Select enabled - Bugfix: Master Channel View does not respond to Access Limits - Bugfix: Gated reverb release slider out of alignment - Bugfix: LPF on Output PEQ's Grow and Glow graphics issue - Bugfix: Scrolling Labels can do funky things - Bugfix: Crash logging wasn't working. You may now be prompted to send information after a crash. Please do so. - Enhancement: Added new reference guide pdf - Enhancement: Radio buttons now highlight and act on release - Enhancement: Improved stereo delay time resolution - Enhancement: Improved labels on output patching tabs for DL32R

December 15, 2014

**Master Fader v3.0 is compatible with Mackie My Fader v3.0 (available soon). It is not compatible with My Fader v2. Do not update to Master Fader 3.0 at this time, if you still need My Fader 2.0 control.** ___3.0.1___ - Bugfix: iPad loses sync when second wireless iPad goes out of range - Bugfix: App crashes when power-up DL32R with incorrectly formatted HDD attached - Bugfix: Long song names for HDD recording on DL32R can cause a crash - Bugfix: Crash when Access Limiting Input DSP and Input Routing and go to Output Routing Channel View - Bugfix: Access Limits can cause some channels to be incorrectly hidden in Masters View - Bugfix: Subs and VCAs cannot be muted on aux with "Use LR Mute" disabled - Bugfix: Sub 6 Missing from VCA Assignment view - Bugfix: None in mute group selector toggle-able when Multi-Select enabled - Bugfix: Master Channel View does not respond to Access Limits - Bugfix: Gated reverb release slider out of alignment - Bugfix: LPF on Output PEQ's Grow and Glow graphics issue - Bugfix: Scrolling Labels can do funky things - Bugfix: Crash logging wasn't working. You may now be prompted to send information after a crash. Please do so. - Enhancement: Added new reference guide pdf - Enhancement: Radio buttons now highlight and act on release - Enhancement: Improved stereo delay time resolution - Enhancement: Improved labels on output patching tabs for DL32R ___3.0___ Master Fader v3.0 adds support for the new Mackie DL32R. It also adds a ton of powerful new features for DL1608 and DL806 users. After updating the app, the mixer firmware will also need to be updated. This will happen when you next connect Master Fader to your DL Series mixer. Please ensure you have enough time for both before your next gig. DL1608/DL806 New Features: * Upgraded user interface for faster workflow -- More information available at a glance for faster navigation -- New navigation bar with instant access to overview, mixer and channel view -- Improved current parameter display that reads more clearly and includes channel color -- Better access to secondary views -- Updated channel strips provides more channel information at a glance * Added Overview showing all input and output channels at once for fast, simple navigation * Added 4 subgroups with stereo linking and dedicated processing on each subgroup. * Added 4 VCAs for professional control over groups of channels * Added digital trim on each input, providing additional input gain control when working wirelessly * Added Routing view providing complete channel routing in one place for inputs, groups and outputs * Added Custom Channel colors and Mix colors for visually differentiated channels, groups and outputs * Updated Selector area adds mute group and view group controls along with a new Masters selector. Together, these 4 selectors control what inputs and outputs are visible. * Updated Shows view allows user to add a comment to each show. Added created/modified dates to each show for improved organization. * Added flexible Record Output patching with record levels. * Added digital Level and Delay control for headphone output * Updated Preset workflow with new location right at the channel * Added ability to export presets, shows and backups via Dropbox or email * Added ability to import presets, shows and backups from 3rd party apps supporting Open In...

November 18, 2014

**Master Fader v3.0 is compatible with Mackie My Fader v3.0 (available soon). It is not compatible with My Fader v2. Do not update to Master Fader 3.0 at this time, if you still need My Fader 2.0 control.** Master Fader v3.0 adds support for the new Mackie DL32R. It also adds a ton of powerful new features for DL1608 and DL806 users. After updating the app, the mixer firmware will also need to be updated. This will happen when you next connect Master Fader to your DL Series mixer. Please ensure you have enough time for both before your next gig. DL1608/DL806 New Features: * Upgraded user interface for faster workflow -- More information available at a glance for faster navigation -- New navigation bar with instant access to overview, mixer and channel view -- Improved current parameter display that reads more clearly and includes channel color -- Better access to secondary views -- Updated channel strips provides more channel information at a glance * Added Overview showing all input and output channels at once for fast, simple navigation * Added 4 subgroups with stereo linking and dedicated processing on each subgroup. * Added 4 VCAs for professional control over groups of channels * Added digital trim on each input, providing additional input gain control when working wirelessly * Added Routing view providing complete channel routing in one place for inputs, groups and outputs * Added Custom Channel colors and Mix colors for visually differentiated channels, groups and outputs * Updated Selector area adds mute group and view group controls along with a new Masters selector. Together, these 4 selectors control what inputs and outputs are visible. * Updated Shows view allows user to add a comment to each show. Added created/modified dates to each show for improved organization. * Added flexible Record Output patching with record levels. * Added digital Level and Delay control for headphone output * Updated Preset workflow with new location right at the channel * Added ability to export presets, shows and backups via Dropbox or email * Added ability to import presets, shows and backups from 3rd party apps supporting Open In...

February 23, 2014

v2.1.1 Fixed crash that could occur when upgrading from older 1.4.x versions of Master Fader. v2.1 Master Fader v2.1 adds significant output processing features, giving you even more power to shape your sound for the venue/applications. After updating the app, the mixer firmware will also need to be updated. Please ensure you have enough time for both before your next gig. Output Parametric EQ • 4-band parametric EQ on all outputs • 2 fully-parametric mid bands • High and low bands selectable as parametric or shelving • Additional HPF and LPF with variable slope control • Works in parallel with GEQ for ultimate output EQ control Output Alignment Delay • Up to 350ms time alignment delay on all outputs • Displayed in milliseconds, meters and feet for easy adjustment • Separate temperature control accounts for ambient room temp • Perfect for delay stacks, fill speakers or general system alignment tasks Multi-Language Support • Master Fader now available in English, Spanish, French, German and Mandarin (Simplified Chinese) • Users can now work in their native language • Perfect for new users Bug Fixes and Stability Improvements: • Improved accuracy of EQ graphics code • Fixed bug where Master Fader could stop registering touches while recording on iOS7 • Fixed crash bug when attempting to rename the current show under iOS6 • Fixed crash bug when pulling a show with maximum snapshots and images • Fixed bug where the device name could be reset after an upgrade • Fixed bugs with preset recall immediately after a channel link • Fixed graphics issue with output selector on DL806 • Fixed bug with vintage comp/gate meter settings not being stored correctly • Fixed bug where channel safes weren’t working properly offline • Fixed bug when updating mixer with multiple iPad devices connected • Fixed bug where access limiting wasn’t properly preventing access for linked outputs • Fixed bug where access limiting wasn’t properly indicating limit state for output compressor • Fixed bug where the podcast button wasn’t working properly • Performed other minor fixes and stability improvements *Important – Future major versions of Master Fader will require iOS 7 or later Having trouble? Email techmail@mackie.com for support.