Cool app
It works perfectly well but I have a question how to connect two 2.0 and one 3.0 in one profile because I don’t know how to do that
Génial!
Le seul défaut c’est qu’on ne peux pas programmer des degrés spécifiques pour faire des choses plus complexes.
Alors si possible ajoutez cela.
Alors si possible ajoutez cela.
Now the firmware update for Buwizz 2 works
After failing with the firmware update, now it works
It is kinda great
I use the BuWizz 3.0 pro it’s great and all but I have trouble with steering control it would twitch a lot I wish they add the steering angle limiter like on Rc car steering when at wrong angles
Connection is horrible
Not sure what the hype was about but I purchased BuWizz 2.0 for my MOC and the battery has been horrible. Even with being directly next to the unit, the battery constantly disconnects and reconnects. This may be first and last BuWizz purchase
Disappointing
Center steering doesn’t work with the Audi E-tron and BuWizz 3.0
Update 3.2.15 Breaks multiple BuWizz functionality
Ever since the update listed in the title my 6x BuWizz 3.0 Pro car now has major issues and no longer drivable. There is major lag on inputs for each additional unit. With only 1 or 2 BuWizz 3.0 Pro it’s manageable but with 4+ the input lag becomes so egregious that the car will drive for 5-7 seconds after I’ve let off the throttle. Terrible update. With that being said the functionality and idea of the app are amazing but this update hurt a lot.
Update: Original review was in August. It is now November. Still no fix.
Second update : End of December, still no fix.
Third update : End of January, still no fix.
Fourth update : 3.4.6 does not fix the issue on iOS or Android devices. I will not be spending any more time or money on this product.
P.S. If you are using 3 or less BuWizz 3.0 Pro, you should have no issues, any more than that and there is a huge latency issue that has yet to be resolved.
Update: Original review was in August. It is now November. Still no fix.
Second update : End of December, still no fix.
Third update : End of January, still no fix.
Fourth update : 3.4.6 does not fix the issue on iOS or Android devices. I will not be spending any more time or money on this product.
P.S. If you are using 3 or less BuWizz 3.0 Pro, you should have no issues, any more than that and there is a huge latency issue that has yet to be resolved.
Show more
Not possibile to drive a model with version 3.4.6
With version 3.4.6 i cannot connect to the BuWizz 3 pro hub on model driver mode. Checking firmware works OK, but when I choose to driver a model, three is Connecting green bar and nothing happens. GeForce lasy updated app was working. Hub 3 pro with fw 3.22 and 1.10
Bad Update
Addressing connection issues is a very good thing. Unfortunately this update forces me to to install a new firmware in every BuWizz 2.0 that I own which drastically changes the way the BuWizz works. It now doesn’t go into standby once you disconnect the phone, instead it stays on until you press the button again.
A couple of my MOCs have the BuWizz buried so deeply that I turn it on by plugging it in (through a fixed extension chord in the model). With this new update, I now have no possibility to turn these ones off once they’re on.
I just don’t understand why every update has these huge problems. Why would you fundamentally change the way of operation of a device that’s been available for more than 6 years?
A couple of my MOCs have the BuWizz buried so deeply that I turn it on by plugging it in (through a fixed extension chord in the model). With this new update, I now have no possibility to turn these ones off once they’re on.
I just don’t understand why every update has these huge problems. Why would you fundamentally change the way of operation of a device that’s been available for more than 6 years?
Show more
Disaster
After firmware update my model cannot be driven like before; commands arrive late, there is a gap in time from action in the app and response from BuWizz. I use the BuWizz 2.0. I want to revert back…
Update 3.2.15 Breaks multiple BuWizz functionality
Ever since the update listed in the title my 6x BuWizz 3.0 Pro car now has major issues and no longer drivable. There is major lag on inputs for each additional unit. With only 1 or 2 BuWizz 3.0 Pro it’s manageable but with 4+ the input lag becomes so egregious that the car will drive for 5-7 seconds after I’ve let off the throttle. Terrible update. With that being said the functionality and idea of the app are amazing but this update hurt a lot.
Update: Original review was in August. It is now November. Still no fix.
Second update : End of December, still no fix.
Third update : End of January, still no fix.
Update: Original review was in August. It is now November. Still no fix.
Second update : End of December, still no fix.
Third update : End of January, still no fix.
Show more
Update 3.2.15 Breaks multiple BuWizz functionality
Ever since the update listed in the title my 6x BuWizz 3.0 Pro car now has major issues and no longer drivable. There is major lag on inputs for each additional unit. With only 1 or 2 BuWizz 3.0 Pro it’s manageable but with 4+ the input lag becomes so egregious that the car will drive for 5-7 seconds after I’ve let off the throttle. Terrible update. With that being said the functionality and idea of the app are amazing but this update hurt a lot.
Update: Original review was in August. It is now November. Still no fix.
Second update : End of December, still no fix.
Update: Original review was in August. It is now November. Still no fix.
Second update : End of December, still no fix.
Show more
Update 3.2.15 Breaks multiple BuWizz functionality
Ever since the update listed in the title my 6x BuWizz 3.0 Pro car now has major issues and no longer drivable. There is major lag on inputs for each additional unit. With only 1 or 2 BuWizz 3.0 Pro it’s manageable but with 4+ the input lag becomes so egregious that the car will drive for 5-7 seconds after I’ve let off the throttle. Terrible update. With that being said the functionality and idea of the app are amazing but this update hurt a lot. Update: Original review was in August. It is now November. Still no fix.
Show more
Mega ärgerlich 😡
Alle meine Fahrzeugprofile sind weg!
Geht gar nicht und nervt gewaltig.
Geht gar nicht und nervt gewaltig.
Update 3.2.15 Breaks multiple BuWizz functionality
Ever since the update listed in the title my 6x BuWizz 3.0 Pro car now has major issues and no longer drivable. There is major lag on inputs for each additional unit. With only 1 or 2 BuWizz 3.0 Pro it’s manageable but with 4+ the input lag becomes so egregious that the car will drive for 5-7 seconds after I’ve let off the throttle. Terrible update. With that being said the functionality and idea of the app are amazing but this update hurt a lot.
Show more
BuWizz keeps shutting down after too much stress
Not sure if it’s an app issue or a hardware issue but it keeps shutting down and I have to plug it back in to reboot it, sometimes it even goes into bootloader mode and loses all of its memory so I have to update it
Terrible UX
The app drives me crazy.
Can’t find Ford Raptor
The app is great and all but want to get to the point you guys motorized the ford raptor which you guys can use the app but when I downloaded it I couldn’t find the ford raptor option please fix this
Edit 6/13/23: also the steering calibration doesn’t work
Edit 6/13/23: also the steering calibration doesn’t work
Not so great to set up for tanks
I looked up tutorials for tank steering, but that was used with an older version (probably 2.0).
It took me a few tries to set up, but afterwards it is really hard to control the power for my tank model.
Hope that game controllers can connect to the app in the future like BrickController2.
It took me a few tries to set up, but afterwards it is really hard to control the power for my tank model.
Hope that game controllers can connect to the app in the future like BrickController2.
Good
I accidentally hit the star so I have to rate the app now. It’s good..
