Would give 0 starts
App does not work making it useless
Update booster
Used the app to update firmware in a booster that had quit working. Worked great!
Substantially Worse Experience
This app somehow got worse with each update.
It displays multiple units while searching with the same name (a sequence of letter led and numbers at first good, luck deciphering that while you’re in a roof cavity), will not connect to said units without an hour of closing & reopening the app.
You can now no longer flash the LED on a displayed device before connecting to it, instead you have to just connect and hope it’s the device you’re after or else wait for it to “download settings” which clearly does nothing.
Once you’re finally in, the app is cumbersome to navigate and alter settings.
If you’re not going to do the app properly and instead outsource its development (which I would hope it has been, since if this was in-house I’d be ashamed to put my name to it), just don’t have an app at all.
It displays multiple units while searching with the same name (a sequence of letter led and numbers at first good, luck deciphering that while you’re in a roof cavity), will not connect to said units without an hour of closing & reopening the app.
You can now no longer flash the LED on a displayed device before connecting to it, instead you have to just connect and hope it’s the device you’re after or else wait for it to “download settings” which clearly does nothing.
Once you’re finally in, the app is cumbersome to navigate and alter settings.
If you’re not going to do the app properly and instead outsource its development (which I would hope it has been, since if this was in-house I’d be ashamed to put my name to it), just don’t have an app at all.
Show more
Ok functional but time to upgrade.
OK functionality.
Could do with some more polish on UX. Some things are not easy to find.
Expect to wait for the legacy Bluetooth 4.2 hardware stack to provide settings.
Often frustrating
COULD WORK MUCH BETTER WHEN OFFLINE which is when I most need it to work. In some dark double brick shielded utility room in marginal MNO cell.
Could do with some more polish on UX. Some things are not easy to find.
Expect to wait for the legacy Bluetooth 4.2 hardware stack to provide settings.
Often frustrating
COULD WORK MUCH BETTER WHEN OFFLINE which is when I most need it to work. In some dark double brick shielded utility room in marginal MNO cell.
Show more
Substantially Worse Experience
This app somehow got worse with each update.
It displays multiple units while searching with the same name (a sequence of letter led and numbers at first good, luck deciphering that while you’re in a roof cavity), will not connect to said units without an hour of closing & reopening the app.
You can now no longer flash the LED on a displayed device before connecting to it, instead you have to just connect and hope it’s the device you’re after or else wait for it to “download settings” which clearly does nothing.
Once you’re finally in, the app is cumbersome to navigate and alter settings.
If you’re not going to do the app properly and instead outsource its development (which I would hope it has been, since if this was in-house I’d be ashamed to put my name to it), just don’t have an app at all.
It displays multiple units while searching with the same name (a sequence of letter led and numbers at first good, luck deciphering that while you’re in a roof cavity), will not connect to said units without an hour of closing & reopening the app.
You can now no longer flash the LED on a displayed device before connecting to it, instead you have to just connect and hope it’s the device you’re after or else wait for it to “download settings” which clearly does nothing.
Once you’re finally in, the app is cumbersome to navigate and alter settings.
If you’re not going to do the app properly and instead outsource its development (which I would hope it has been, since if this was in-house I’d be ashamed to put my name to it), just don’t have an app at all.
Show more
App does not work! Can I get refund on hardware !!!!!!!!
App does not work! Can I get refund on hardware !!!!!!!!
Buy Star link mobile don’t waste money
I have both cel fi roam and star link mobile set up in the car. Cel fi will let you down more times than you can count. Won’t connect to wave app so you can’t update and check on the function of the unit. Signal is boosted f all when it does and you make calls it drops out. For $1000 it is junk. Star link mobile cost $350 will connect anywhere no matter how remote you are, multiple people can be connected and once and pay so you go plans starting at $50 month with no lock in (before you go traveling depending on how long you are away just pay the $50 and then cancel when your back till the next trip away) and install of the star link takes 30 seconds. really disappointed in the cel fi because it let me down when I needed it the most and if I didn’t have the star link I would of had to of called emergency services because of the situation I was in. Don’t waste your time and money on this.
Show more
Latest ‘Update’ rendered the product Useless
Since the latest update, the R41 Roam is now an expensive paperweight! When trying to write to the support webform, it keeps erroring saying ‘this field is required’ despite the field being filled in! What the actual???? Pay nearly $1000 for this product and get less than useless support and a product that doesn’t work!
Show more
Stay away
App implies my system is configured and working correctly, but not getting any additional signal strength. Whole system is a waste of money.
Worse
This app has gone downhill after the last update or two. It rarely connects with the most recent update making it almost useless.
Terrible app
One of the worst apps I’ve had the displeasure of using. Spending over a grand on their hardware which barely does what it supposed to and then the app is even worse. So hard to connect, without jumping through hoops. Even the tech help just say try turning it off and on again. That’s the best they can come up with.
I use Victron gear and their app works flawlessly every time. They need to take a page out of their books and fire the current people in charge of apps
Don’t waste your money on their devices, total waste of time.
I use Victron gear and their app works flawlessly every time. They need to take a page out of their books and fire the current people in charge of apps
Don’t waste your money on their devices, total waste of time.
Show more
It never connect to the app worse app ever
It never connect to the app 1/10 it might work n then disappear
worse app ever the older model n app was much better to connect to .
worse app ever the older model n app was much better to connect to .
Expensive junk
Unit fails to boost any signal and since the app update, refuses to connect to Bluetooth
Save your money get starlink
There is a great degree of irony in the fact that you buy a Celfi to assist in obtaining signal in remote areas, and every time the signal is low the app becomes extremely laggy, either taking an eternity to make a connection with your device, or regularly failing to achieve a connection.
The developers obviously think this poor performance is charming hence why as the app goes through an endless amount of processes to connect to your device they have humorous messages including telling people not to shake or poke the screen. Well I hope they developers can see the humour, those of us who have paid thousands of dollars to have this device installed may not share the same opinion.
The developers obviously think this poor performance is charming hence why as the app goes through an endless amount of processes to connect to your device they have humorous messages including telling people not to shake or poke the screen. Well I hope they developers can see the humour, those of us who have paid thousands of dollars to have this device installed may not share the same opinion.
Show more
Absolutely useless waste of money device
Absolutely useless waste of money device Cel-fi go. Will not register
App crashing
App takes forever to connect to cel fi unit and when it does the app screen just goes white
Cannot connect after today’s release
The current version is working well. Thank you.
Cannot connect after today’s release
One star to get your attention (will revise after fix).
I could connect with the last version, but with the current one, it hangs during “downloading settings”. All I get are the cutesy messages (sorry guys, entertaining, but annoying when the app doesn’t work.)
I could connect with the last version, but with the current one, it hangs during “downloading settings”. All I get are the cutesy messages (sorry guys, entertaining, but annoying when the app doesn’t work.)
Disappointed
When it works on Mobile it’s good, on stationary it’s great. You got rid of the old signal graphics why ? It was easy to to see at a glance.
Thanks, V2.0.3 fixed blank settings screen
Glad to see this update which returned settings screen.
