Absolute rubbish
Doesn’t do anything lets you put measurements in then wont add to system tried on iPhone and ipad same results zero
Response from developer
I have just tested on an iPhone 14 Pro, 16 Pro and an 11-inch iPad Pro (M4), all running iOS 18.5. I can't find any issues with adding pipe lengths to the system, it all appears to be working fine. Could you please let me know your device and iOS version so as I can try and replicate your issue please? You can contact me via my web site here: https://www.speaktothegeek.co.uk/support-and-contact-info
Could be better
Would be a lot better and more useful if it was made useable for UP1 as well
Hose size on the purge makes no difference
Very disappointed to see that the purge time remains the same for a 15mm purge point as it does a 50mm
Something very wrong here hey
Something very wrong here hey
Seriously lacking
This is fine for domestic and medium-sized commercial installations, but where it falls short is on calculations involving larger internal volumes. I find that once you get up to about 1.8 cubic meters or above, it simply errors and does not give purge and test times at all.
Furthermore the steel pipe sizes (a) are given in mm when steel is always measured imperially - in inches and fractions (b) only goes up to 150mm - six inches - when eight inch, twelve and above are common.
Disappointing app that really could be indispensable with these small changes.
Furthermore the steel pipe sizes (a) are given in mm when steel is always measured imperially - in inches and fractions (b) only goes up to 150mm - six inches - when eight inch, twelve and above are common.
Disappointing app that really could be indispensable with these small changes.
Show more
Could be so much better
Yes the calculator gives TTD but the calculations above do no indicate IVmeter so does not give IV to total
I expected the calculator to allow for maximum permissible leak rates, but sadly it just works out the purge volume and TTD although given i had to manually work out to see if it was correct
NO TTP nor let by period
Unfortunately the app is sadly lacking however it does work out the pipe volume correctly !
I expected the calculator to allow for maximum permissible leak rates, but sadly it just works out the purge volume and TTD although given i had to manually work out to see if it was correct
NO TTP nor let by period
Unfortunately the app is sadly lacking however it does work out the pipe volume correctly !
Show more
