打印纸留白多一截
为什么更新了以后每次打印都要长一截出来，也改变设置不回去了
Lacking functionality- Shame
Purchased the LW-Z710 after a hype review on efixx channel. The app is seriously Lacking features like, auto centre or the choice of text allignment in a cell/block. There are no pre templates for various types
Of Condumer unit, e.g. RCD, RCD Split, RCBO etc for printing labels for Consumer units and much more. Like the inability to save labels under nothing but the 1st name in the label not a more logical file name to go back to.
The basic media tapes
Just aren’t sticky enough to do cable wraps as others are. The cable wrap tapes are sold out or not being manufactured and are 4chan cost of the standard ones if you can get them.
But I could live with it if they just made a decent app.
Looks like no updates in a year I hope they’re working on some this thy rivals the brother pro label tool.
Of Condumer unit, e.g. RCD, RCD Split, RCBO etc for printing labels for Consumer units and much more. Like the inability to save labels under nothing but the 1st name in the label not a more logical file name to go back to.
The basic media tapes
Just aren’t sticky enough to do cable wraps as others are. The cable wrap tapes are sold out or not being manufactured and are 4chan cost of the standard ones if you can get them.
But I could live with it if they just made a decent app.
Looks like no updates in a year I hope they’re working on some this thy rivals the brother pro label tool.
Show more
就是个垃圾
就是个垃圾
lw-c410为什么搜索不到呢
能不能支持上该款机型？
Useless. Can’t do more than one line on a wire wrap.
The PX700 and PX900 can both do multi-line wire wrap labels. The LW-PX400 cannot. This is craziness.
Still needs vertical repeating text
Update: Vertical text is now implemented but spacing between lines is excessive. Keep working on it! Though LW-600P is discontinued, it still works reliably and I still use it.
5 yr old review: I echo the lament of the previous reviewer. A lot of the labeling I do requires repeated text oriented 90 degrees on the tape. Epson, fix this and you'll sell more consumables. As an early adopter of the LW-600P, this is the prime reason it sits on the shelf instead of being used as intended.
5 yr old review: I echo the lament of the previous reviewer. A lot of the labeling I do requires repeated text oriented 90 degrees on the tape. Epson, fix this and you'll sell more consumables. As an early adopter of the LW-600P, this is the prime reason it sits on the shelf instead of being used as intended.
Show more
Custom patch panels
When is custom patch panel support coming?
Would also love to be able to do port groups.
Eg 1A 1B 1C
Also just simple 1 2 3 on patch panels
Would also love to be able to do port groups.
Eg 1A 1B 1C
Also just simple 1 2 3 on patch panels
세로 두줄쓰기는?
세로쓰기는 '라벨 제작' -> '일반라벨' 항목에서 찾아서 해보았는데, 110 B/L 용으로 세로로 두줄을 출력하려고 하니까 기능이 없는 듯 합니다.
엔터로 문단을 나누어도 그냥 한줄로 출력이 되어버립니다. 업그레이드 부탁드립니다.
엔터로 문단을 나누어도 그냥 한줄로 출력이 되어버립니다. 업그레이드 부탁드립니다.
请尽快适配iPhone X
拜托了🙏🏻
Wichtigste Funktionen fehlen...
Update:
Auch im aktuellen Update wurden die fehlenden Funktionen nicht hinzugefügt.
————————————————————
Es gibt z.B. keine Benutzerdefinierten Kabelfähnchen und bei Stecktafeln ist der Punkt einfach ausgegraut mit dem Vermerk "bald verfügbar". Allerdings ist das letzte Update schon fast ein Jahr her was wohl kaum als bald zu bezeichnen ist.
Auch im aktuellen Update wurden die fehlenden Funktionen nicht hinzugefügt.
————————————————————
Es gibt z.B. keine Benutzerdefinierten Kabelfähnchen und bei Stecktafeln ist der Punkt einfach ausgegraut mit dem Vermerk "bald verfügbar". Allerdings ist das letzte Update schon fast ein Jahr her was wohl kaum als bald zu bezeichnen ist.
Show more
快快快，急需
强烈要求尽快推出竖版面板模板
Change the app icon
Change the icon
No vertical text printing!!!!
Review of 2nd version. I was happy to see the vertical text toggle in this update. But I was let down as soon as I went to the preview window. One letter or digit per line on the vertical text label. It would perfect if you could put multiple digits vertically across the width of the label.
First review. I currently use the brother p-touch edge for my cable labels. On an average project I have 200+ cables to label and 95% of them are vertical text, repeating wrap. I purchased this because of the Datacom app ability but it doesn't offer this common feature. I'm hoping there is an update soon to expand the features. To take it one step further add the margin adjustments that are offered in the Epson iLabel app, wasted tape is another downfall of the p-touch.
First review. I currently use the brother p-touch edge for my cable labels. On an average project I have 200+ cables to label and 95% of them are vertical text, repeating wrap. I purchased this because of the Datacom app ability but it doesn't offer this common feature. I'm hoping there is an update soon to expand the features. To take it one step further add the margin adjustments that are offered in the Epson iLabel app, wasted tape is another downfall of the p-touch.
Show more
