Latest update made yeti useless
My yeti 3000x worked perfectly with goal zero for years. The latest app update required establishing a new connection to the Yeti battery pack. The app hung multiple times while trying to updated the Yeti firmware. Fj ally, the yeti and app work properly again.
One thing that really needs to be addressed is that the Yeti battery, in my case Yeti 3000X, turns on the lcd display and display backlight every time the unit charges itself according to the battery charge profile setting in the app.
The LCD display and backlight seem to consume a fair amount of power and by the time I notice the unit has charged and manually shut of the LCD display, 1% or more of the battery charge has been consumed needlessly.
PLEASE update the firmware so the LCD display does not turn on after charging. That would make the app and bettery perfect. Thank you.
One thing that really needs to be addressed is that the Yeti battery, in my case Yeti 3000X, turns on the lcd display and display backlight every time the unit charges itself according to the battery charge profile setting in the app.
The LCD display and backlight seem to consume a fair amount of power and by the time I notice the unit has charged and manually shut of the LCD display, 1% or more of the battery charge has been consumed needlessly.
PLEASE update the firmware so the LCD display does not turn on after charging. That would make the app and bettery perfect. Thank you.
Show more
CRcap roger
App is faulty
This app interface with my Yeti 3000 to connect with internet is non operational. Have tried many times to down load necessary updates. Contact with Goal Zero tech support is impossible leaving on hold.
FVFred Vaught
Fails To Update Firmware For Recall
This app fails to update the firmware for the recall on Yeti 3000X. There is no “settings, update firmware” selection. Some subgenius decided to name one set of settings “App Settings” accessed through the three stacked line icon (hamburger icon ) on the top left, and also have a gear icon on the top right for other settings. If you dig through the menus enough you may find the firmware section (hint: it’s under the gear). Once found, the firmware update option is disabled if the unit isn’t charged. Lovely. The new firmware mentioned in the RECALL website page is v1.9.5 but the app only shows v1.8.9 being available. More Lovely. According to the U.S. Consumer Product Safety Commission (CPSC) RECALL notice, the GoalZero Yeti 3000X is a fire hazard without the proper firmware update. Even More Lovely. Someone with a severe intellectual deficit decided that you need to run the dangerous risk of charging the firebomb they sold you *before* they allow you to upgrade the firmware to an outdated version that doesn’t fix the firebomb problem. And of course, the app misidentifies the 3000X it’s connected to as a 1500X. I upgraded the firmware from v1.3.0 to v1.8.9 but it would not let me upgrade to v1.9.5 through “Direct Connect” mode. It seems you are forced to create an account, give your email, agree to annoying BS terms, and use the less than useful “Cloud Connect” mode to get the v1.9.5 firmware required by the RECALL to keep this piece of work from being a firebomb. I have nothing nice or complimentary to say about the developers.
Show more
Nnope-001
Backup system
Fast
JJbeltran2813
Horrible UI/UX
Very pretty app but that’s as far as it goes. Usability is horrendous. Chronically loses connectivity and difficult to get it to reconnect. Would not use it except for recall and need for firmware update to keep unit from catching fire. Recall notice page is poor as well. Very pretty but more concerned with marketing than safety.
Show more
WWTKJD2001







