Level Measure Pro

Level Measure Pro

Bubble level & angle finder

0 ratings
Free
With Ads

Rating summary

Details

Released
November 14, 2026
Updated
November 14, 2026
Level Measure Pro screenshot #1 for iPhone
Level Measure Pro screenshot #2 for iPhone
Level Measure Pro screenshot #3 for iPhone
Level Measure Pro screenshot #4 for iPhone
Level Measure Pro screenshot #5 for iPhone
Level Measure Pro screenshot #6 for iPhone
iphone
ipad
🖼️Get Icon
Icons↘︎

About

Level Measure Pro turns your phone into a bubble level and tilt meter. It shows the angle, and in Edge mode it also tells you what to fix, for example "Raise left side 4 mm". EDGE MODE Stand the phone on its edge on a shelf, picture frame or worktop. • Angle dial with a moving needle, plus a bubble vial • Correction hint in millimetres, based on a frame width you set • The display turns so the text stays upright on whichever edge is down FLAT MODE Lay the phone screen up on a table, floor or appliance. • Bubble target with X and Y bars • Shows which side is high • Total tilt plus separate X and Y readings Auto switches between Edge and Flat as you move the phone. Tap a mode to keep it, or tap Auto to switch back. UNITS AND TECHNICAL DATA Switch the main reading between degrees, percent, millimetres per metre and ratio (1:X). The technical data panel shows angle, slope, ratio, rise, the rise over your frame width, and the calibration offset in use. HOLD AND SAVE • Hold freezes a smoothed reading so you can read it after lifting the phone • A held reading shows slope, rise, ratio and the correction needed over your frame width • Save readings with a name and review them later • Swipe to delete a saved reading • Saved readings stay on your device CALIBRATION A phone's sensor and case are rarely perfectly true, so calibrate before careful work. • Two-point calibration: capture a reading, turn the phone 180° on the same spot, capture again • Separate calibration for Flat mode and for each edge • "Set zero here" makes readings relative to any surface you choose • Reset to factory values at any time FEEDBACK AND SETTINGS • Haptic feedback when the reading reaches level (on devices with haptics) • Optional light tick for each degree above 1° • Screen reader announcement when the reading reaches level • Level tolerance: 0.1°, 0.25°, 0.5° or 1.0° • Smoothing: Fast, Normal or Steady • Default units and frame width • Keep the screen awake while measuring • English and Urdu GOOD TO KNOW Phone levels are for guidance. For structural work, check with a dedicated measuring instrument. A phone is only about 15 cm long, so for floors and other long surfaces, place it on a 1–2 m straight edge. No account is needed. The app shows ads served by Google AdMob. Depending on your region, you can review your ad privacy choices in Settings.
Show more
+1

What's New in Level Measure Pro

1.0

November 14, 2026

Developer apps