Lidarium

Measure it. Scan it. Set it out. Lidarium turns an iPhone or iPad Pro with LiDAR into a tape measure, a 3D scanner and a "local rover" for stake-out – no GNSS receiver, no coordinates, no account. QUICK AR MEASURE • Distance chains, areas (surface, plan, perimeter), heights from the floor, circles and diameters. • Points snap to wall/floor seams and corners; press and hold for a magnifier loupe. • Mark sockets, switches, lights and pipes, save as a project and continue in AR later. • Screenshot or PDF report in a few taps. ROOMS • Walls, doors and windows with sizes (RoomPlan). Check and correct every frame in AR. • Scan several rooms in a row and get floor plans as PDF and DXF, with wall elevations. DOORS, WINDOWS, STAIRS • Focused element scans: opening width × height, sill and reveal depth. • Stairs as a clean step model: rise, going, width and pitch for every step. 3D SCANS • Objects and terrain – piles, pits, machines – as LiDAR meshes coloured by height. • Furniture: dense points with the floor removed, W × D × H in one walk-around. • Small objects: photo capture builds a detailed textured model on the device. • Site / exterior: house walls, terrace and steps as clean planes, ground with contours. ANALYSE • Ruler with slope, angle, area, circle, pipe/column, volume and clip box. • Flatness heat map for walls, floors and ceilings. • Cut/fill between two scans of the same place. • Remove an object from a scan and close the hole. • Materials: paint, flooring, skirting and earthworks with waste and truckloads. • Object markers with takeoff counts and pipe lengths. STAKE OUT FROM REAL EDGES • Pin line A on a real edge – a curb, a wall, a terrace board – and line B on another. • Templates: rectangle by offsets (slab, pool, foundation), point from a line (post, hole), divide a line, or an outline by sides and angles. • Follow the arrows ("↑ 1.20 m · → 0.35 m") until the target turns green, then mark it. • Averaged pins, control points against AR drift and a live accuracy estimate. • Compare designed and marked sides and diagonals. EXCAVATION • Push a layout down to a flat bottom with working space and side slopes. • Excavation and loose volume, fill, bottom area and depths – see the pit in 3D "as dug" and draw a section. REPORTS AND EXPORT • PDF reports with snapshots and tables, DXF plans, CSV, PLY/OBJ/USDZ models – shared only when you choose to. PRIVATE BY DESIGN • Everything runs on the device. No account, no ads, no tracking, works offline. Requirements: iPhone 12 Pro or later Pro model, or iPad Pro (2020 or later), with LiDAR; iOS 17 or later. Metric and imperial units. English, Swedish and Russian. Measurements are approximate and not survey-grade: LiDAR is about ±1–2 cm at short range; stake-out about 1–2 cm within 5–6 m of the reference lines, and AR drift can add more over longer distances. Check important dimensions with a tape.